1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your ANYFAR Wireless Carplay Module Android Auto Adapter. This module is designed to integrate advanced smartphone connectivity features into your Porsche PCM3.1 or PCM4.0 infotainment system, allowing for a seamless and enhanced driving experience.
1.1 Functional Statement
- CarPlay / Android Auto: The built-in vehicle machine interaction system cooperates with the central control knob button to provide voice command and control of phone, information, navigation, and music. It supports Siri voice interaction for more information. Both wireless and wired connections are supported for CarPlay and Android Auto, including voice control.
- Mirroring: Supports wired and wireless mirroring functions for iPhone (AirPlay) and Android phones (AutoLink).
- Reversing Video Input: The smart module can decode video and can be equipped with rear-view video input.
- USB Video Playback: Automatic media playback function, allowing direct playback of video and audio media from a USB disk.
2. Safety Information
Please read and understand all instructions before installation and use. Improper installation or use can lead to damage to the product, vehicle, or personal injury. Always prioritize safe driving practices. Do not operate the system in a way that distracts you from the road.
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation.
- Consult a professional installer if you are unsure about any steps.
- Do not attempt to disassemble or modify the module.
- Keep the module away from water and extreme temperatures.
3. Product Specifications
3.1 Applicable System and Car Models
This module is compatible with Porsche vehicles equipped with PCM3.1 or PCM4.0 systems. Please verify your car's system and model year before installation.
| Car Model | Years | Screen Inch |
|---|---|---|
| Cayenne | ||
| Panamera | 2017-2018 | 7" |
| Cayman |
3.2 Dimensions and Weight
- Length: 26 cm
- Width: 19 cm
- Height: 11 cm
- Weight: 0.958 kg
4. Installation and Setup
4.1 Kit Contents
Before starting the installation, please ensure all components are present:
- Main CarPlay Module
- Power Cable
- RCA/USB Cable
- LVDS IN/OUT Cable
- WiFi Antenna
4.2 Toggle Switch (DIP) Setup
The module features toggle (DIP) switches that need to be configured according to your car's screen size and system. Refer to the diagram below for switch locations and settings.
For 7/8 inch screen (800x480 resolution):
| Switch No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Setting | Off | Off | On | On | On | On | On | On |
4.3 Cable Connection Chart
Follow the detailed wiring diagram below to connect the module to your vehicle's infotainment system. Ensure all connections are secure.
Key Connections:
- Connect the provided LVDS cables between the original display and the module.
- Connect the power cable (CAN POWER) to the vehicle's power source.
- Connect the USB cable for media playback and updates.
- Connect AUX, MIC IN, and MIC OUT as per the diagram.
- Connect Rear View CVBS and Front View CVBS for camera inputs.
- If you experience noise, try unplugging the AUX cable.
After all cables are connected, press and hold the "MEDIA" and "BACK" buttons on your car's console for 3 seconds to switch between the PCM 4.0 original car interface and the CarPlay interface.
5. Operation
5.1 Wireless CarPlay Connection
To connect your iPhone wirelessly to CarPlay:
- Open the system's wireless CarPlay connection interface.
- On your iPhone, turn on Bluetooth and Wi-Fi, and keep them enabled.
- Select the Bluetooth device name (e.g., "CAR-XXXX") on your iPhone.
- Confirm the pairing request and select "Use CarPlay" when prompted.
5.2 Wireless Android Auto Connection
To connect your Android phone wirelessly to Android Auto:
- Open the system's wireless Android Auto connection interface.
- On your Android phone, turn on Bluetooth and Wi-Fi, and keep them enabled.
- Select the Bluetooth device name (e.g., "CAR-XXXX") on your Android phone and pair.
- After successful Bluetooth pairing, follow the on-screen Android Auto connection process.
5.3 Apple Wireless Screen Mirroring (AirPlay)
- In the module's interface, select the "AirPlay" icon.
- On your iPhone, keep Wi-Fi on. Connect to the module's Wi-Fi network (e.g., "CAR-WIFI-XXX"). The default password is
66668888. - Once connected, pull down the status bar on your iPhone, select "Screen Mirroring," and then tap "Airplay."
5.4 Android Wireless Screen Mirroring (AutoLink)
- In the module's interface, select the "AutoLink" icon.
- Use your Android phone's browser to scan the QR code displayed on the screen to download and install the AutoLink app.
- In your phone's settings, ensure AutoLink is set to "ON".
- Keep Wi-Fi on. Connect to the module's Wi-Fi network (e.g., "CAR-WIFI-XXXX"). The default password is
66668888. - Open the AutoLink Pro app, search for "CAR-WIFI-XXXX," connect, and then click "START NOW."
5.5 Steering Wheel Button Control
The module integrates with your vehicle's steering wheel controls for convenient operation. Note that operation methods may vary slightly depending on your specific car model. Consult customer service if you encounter discrepancies.
- Volume Control: Swipe up on the steering wheel control to increase volume, swipe down to decrease.
- Call Management: Answer or hang up calls.
- System Switching: Long press for 3 seconds to switch between the original car system and the CarPlay/Android Auto interface.
- Media Control: Previous song, Next song.
- Volume Adjustment (Console Knob): Rotate left and right to adjust volume.
- Knob Control: Use the console knob for navigation within the interface.
6. Settings
6.1 Audio Settings - Call Echo Cancellation
If you experience an echo during phone calls, you can adjust the echo cancellation settings:
- Navigate to
Settings>Audio>AEC Delay. - Click the "Start Auto AEC" button.
- For best results during correction:
- Keep the car quiet.
- Set the volume to a moderate position.
- Wait 20 seconds for the estimation to complete.
6.2 Reversing Settings
Configure the camera type for reversing video input:
- Navigate to
Reversing Settings. - Select the camera type as "Original camera" if you are using the factory-installed camera.
7. Troubleshooting
If you encounter issues, please review the installation and connection steps. For common problems, consider the following:
- No display or incorrect display: Double-check all cable connections, especially the LVDS cables. Ensure the DIP switches are set correctly for your screen size.
- No audio or poor audio quality: Verify the AUX connection. If there's noise, try unplugging and re-plugging the AUX cable. Check audio settings for echo cancellation.
- CarPlay/Android Auto not connecting: Ensure Bluetooth and Wi-Fi are enabled on your phone and paired correctly. Restart both your phone and the car's infotainment system.
- Steering wheel controls not working: Confirm the module is fully integrated and recognized by the car's system. Some car models may require specific configurations.
8. User Tips
- Compatibility Check: Always double-check the compatibility of the module with your specific Porsche model and PCM version (PCM3.1 or PCM4.0) and year before installation.
- Professional Installation: If you are not comfortable with car electronics installation, it is highly recommended to seek professional assistance to avoid damage to your vehicle or the module.
- Firmware Updates: Periodically check the manufacturer's website for any available firmware updates for the module to ensure optimal performance and compatibility with the latest smartphone operating systems.
9. Support
For further assistance or if you have questions not covered in this manual, please contact customer support.
Before contacting support, please gather the following information:
- Order ID
- Car Model
- Year of the Car
- Screen Size of the Car
- DIP Switch Setup (current settings)
- Pictures of the LVDS Cable Connection
- Software Version (Go to the CarPlay decoder menu, enter "Settings," and select "System Version." The software version will be displayed there.)
A comprehensive user manual in PDF format is also available for download: Download User Manual (PDF)