1. Introduction
The RAGEER PCIe 5.0 X16 Riser Cable is designed to extend your graphics card connection, enabling flexible mounting options such as vertical GPU installation. This cable supports the latest PCIe 5.0 standard, offering ultra-high bandwidth and stable transmission for demanding applications like gaming, AI computing, and professional workstations. It is backward compatible with older PCIe generations, ensuring broad compatibility with various hardware setups.
2. Product Overview
2.1 Key Features
- PCIe 5.0 Performance: Supports PCIe 5.0 X16 with a 64GB/s bandwidth and 32GT/s transfer rate.
- Backward Compatibility: Automatically negotiates to PCIe 4.0, 3.0, and 2.0 speeds based on your hardware.
- Robust Construction: Features a high-strength PC+ABS protective cover, 29AWG thick soft shielded cable, and 4 layers of thickened PCB.
- Premium Connectors: Equipped with high-quality Foxconn shielded and gold-plated connectors for maximum durability and signal integrity.
- EMI Shielding: Dual-layer EMI-resistant design prevents signal interference and loss.
- Flexible Design: Reinforced stress points allow for flexible routing while maintaining performance.
- Improved Airflow: Enables vertical GPU mounting, which can improve case airflow and cooling.
- Zero Loss Transmission: Engineered for stable, high-speed data transfer without frame drops.
2.2 Compatibility
The RAGEER PCIe 5.0 X16 Riser Cable is fully compatible with most modern graphics cards and motherboards, including:
- NVIDIA GPUs: RTX 4090, RTX 5090, RTX 5080, RTX 5070, RTX 5060 Ti, RTX 5060, RTX 4080, RTX 4070 Ti.
- AMD GPUs: RX 7900 XTX, RX 7900 XT, RX 7800 XT, RX 6900 XT.
- Motherboards: Compatible with WRX80/90E chipsets and other motherboards supporting PCIe 5.0, 4.0, or 3.0 slots.

Image: Construction details showing PC+ABS cover, 29AWG cable, 4-layer PCB, and Foxconn connector.
3. Setup Instructions
Follow these steps to install your RAGEER PCIe 5.0 X16 Riser Cable for a vertical GPU mount:
- Prepare Your Case: Ensure your PC case supports vertical GPU mounting and has the necessary brackets or slots.
- Remove Existing GPU (if applicable): Carefully unseat your graphics card from the motherboard's PCIe slot.
- Install the Riser Cable:
- Connect one end of the riser cable to the motherboard's PCIe X16 slot. Ensure it is fully seated.
- Secure the other end of the riser cable to your case's vertical GPU mounting bracket.
- Mount the GPU: Attach your graphics card to the riser cable's PCIe slot. Ensure it is securely fastened to the vertical mount.
- Connect Power: Reconnect all necessary power cables to your graphics card.
- Cable Management: Route the riser cable neatly to avoid interference with fans or other components.

Image: Illustration of vertical GPU mount protecting GPU and motherboard.

Image: Example of a GPU mounted horizontally before using a vertical mount.

Image: Example of a GPU mounted vertically after using a riser cable, preventing sag.
4. BIOS Configuration
For optimal performance and to resolve potential boot issues, especially when mixing PCIe generations (e.g., PCIe 4.0 cable with PCIe 5.0 GPU), you may need to adjust your motherboard's BIOS settings.
4.1 BIOS Setup Operation Steps
- Enter the BIOS/UEFI Setup Utility: Restart your computer and press the designated key (e.g., DEL, F2, F10) to enter BIOS setup.
- Switch to Advanced Mode: Navigate to the advanced settings section of your BIOS.
- Go to PCIe/Chipset Settings: Locate the section related to PCIe or Chipset configuration.
- Locate the Specific PCIe Speed Option: Find the setting that controls the PCIe slot speed (e.g., PCIEX16(G5) Link Speed).
- Change the Setting: Adjust the PCIe speed. For example, if you are using a PCIe 4.0 cable with a PCIe 5.0 GPU, you might need to manually set this to 'Gen4' instead of 'Auto' or 'Gen5' to ensure successful booting.
- Save Changes and Exit: Save your changes and exit the BIOS. Your system will then restart.
Note: The provided image uses ASUS BIOS for demonstration. The exact menu names and navigation may differ for other motherboard brands. Look for options such as "PCI Subsystem Settings", "Chipset Configuration", or "North Bridge Configuration".
Important: Some motherboards (e.g., HUANANZHI, Maxsun, JGINYUE) may require setting the PCIe speed to 'Gen3' due to potential interference.

Image: Diagram illustrating the steps to configure PCIe speed in an ASUS BIOS utility.
5. Operating Instructions
Once installed and configured, the RAGEER PCIe 5.0 X16 Riser Cable operates as a transparent extension of your motherboard's PCIe slot. It is designed for plug-and-play functionality. Ensure your graphics card and power supply are compatible and correctly connected.
6. Maintenance
- Avoid Sharp Bends: While the cable is flexible, avoid bending it sharply, especially near the connectors, to prevent damage to internal wires and maintain signal integrity.
- Keep Connectors Clean: Periodically inspect the PCIe connectors for dust or debris. Use compressed air or a soft brush to clean them if necessary.
- Secure Installation: Ensure the cable and GPU remain securely fastened to prevent accidental disconnections or damage from movement.
7. Troubleshooting
7.1 Common Issues and Solutions
- System Fails to Boot / No Display:
- Ensure the riser cable and GPU are fully seated in their respective slots.
- Check your BIOS settings and manually set the PCIe slot speed to match the cable's generation (e.g., Gen4 for a PCIe 4.0 cable) or even Gen3 if issues persist with certain motherboards.
- Verify that your graphics card and power supply are compatible and correctly connected.
- Reduced Performance:
- Confirm that your BIOS PCIe speed setting is appropriate for your hardware configuration.
- Ensure the cable is not sharply bent or kinked, which could affect signal quality.
7.2 Frequently Asked Questions (FAQ)
- Q: Are 40 and 30 series graphics cards plug-and-play?
- A: Yes, the riser cable is fully compatible with all models of 30 and 40 series GPUs, offering plug-and-play functionality.
- Q: Do I need additional power connectors for the riser cable?
- A: No, the riser cable itself does not require additional power connectors. Ensure your graphics card and power supply are compatible and correctly connected.
- Q: Can the product be bent?
- A: Yes, the cable is designed to be flexible. However, avoid sharp bends, as excessive kinking could potentially affect transmission efficiency over time.

Image: Visual representation of common questions and answers regarding the riser cable.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | RAGEER |
| Type | PCI-Express Cables |
| Origin | Mainland China |
| PCIe Version | 5.0 |
| PCIe X16 Transfer Rate | 32GT/S |
| PCIe X16 Bandwidth | 64GB/S |
| Backward Compatibility | PCIe 4.0 / 3.0 / 2.0 |
| Cable Length Options | 10CM, 15CM, 18CM, 18.5CM, 20CM, 25CM, 30CM |
| Cable Thickness | 1.9mm / 0.07inch |
| Connector Length | 185mm / 7.3inch |
| Connector Height | 139mm / 5.5inch |
| Connector Width | 20mm / 0.8inch |
| Package | Yes |
| Package Weight | 0.182 kg |
| Package Dimensions (L x W x H) | 30 cm x 18 cm x 6 cm |

Image: Detailed dimensions of the PCIe 5.0 X16 Riser Cable.
9. User Tips
- When installing, ensure the cable is routed smoothly without sharp bends to maintain optimal signal integrity.
- If you encounter boot issues, especially when using a PCIe 4.0 cable with a PCIe 5.0 GPU, remember to adjust your motherboard's BIOS settings to manually set the PCIe slot speed (e.g., to Gen4 or Gen3) for stability.
- Regularly check for dust accumulation around the connectors and clean them gently to ensure reliable contact.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt for any warranty claims.
