PARKSON Led Grow light

Contents

PARKSON LED Grow Light User Manual

Models: 50W, 100W, 150W Full Spectrum LED Plant Growth Lamp

1. Introduction

Thank you for choosing the PARKSON LED Grow Light. This manual provides essential information for the safe and effective use of your new grow light. Designed to support all stages of plant growth, from sowing to fruiting, this full-spectrum LED light is suitable for a variety of indoor plants, including potted plants, bonsai, succulents, fruit plants, and flowering plants.

Three PARKSON LED Grow Lights of different sizes with a full spectrum graph

Image: PARKSON LED Grow Lights (50W, 100W, 150W) with full spectrum wavelength chart.

2. Safety Warnings

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries.

  • Voltage Compatibility: The grow light operates at a nominal voltage of 110-240V AC. Only use a power supply that matches the rated voltage to prevent damage or fire caused by overvoltage or undervoltage.
  • Power Disconnection: Always disconnect the power supply before installation, maintenance, or any handling of the device. Never operate the device while it is powered on.
  • Environmental Conditions: Do not use the product in damp, high-temperature, or flammable/explosive environments. The light has an IP65 waterproof rating, but it is not designed for submersion or extreme conditions.
  • Child Safety: Keep the product out of reach of children to prevent accidental ingestion or contact.
  • Installation: Ensure the light is securely mounted to prevent it from falling.

3. Product Overview

The PARKSON LED Grow Light is available in 50W, 100W, and 150W models, offering a full spectrum light optimized for plant growth. Key features include:

  • Full Spectrum Light: Wavelength range of 400-680nm, providing blue/red light suitable for every growth period (sowing, germination, growing, flowering, fruition).
  • High-Brightness 2835 LED Chip: Efficient and powerful illumination.
  • Durable Construction: Made with aluminum for fast heat dissipation, ensuring longevity and stable performance.
  • IP65 Waterproof Level: Provides protection against water splashes, making it suitable for various indoor growing environments.
  • Adjustable Angle: Features a freely adjustable bracket to direct light precisely where needed.
  • Dimming Function: Allows brightness adjustment from 25% to 100% to match plant growth stages.
Close-up of LED chip, aluminum heat sink, and adjustable angle bracket

Image: Details of 2835 LED Chip, aluminum heat dissipation, and adjustable angle feature.

LED Grow Light being splashed with water, indicating IP65 waterproof level

Image: Visual demonstration of the IP65 Waterproof Level.

4. Specifications

Attribute Specification
Brand NamePARKSON
Item TypeGrow Lights
Model NumberLed Grow light
Power SourceAC
Nominal Voltage110-240V
Voltage220 V
MaterialAluminum
Installation MethodSelf-contained
Is DimmableYes
Waterproof LevelIP65
CertificationCCC, CE, ROHS
Warranty3 Years

Model Specific Dimensions and LED Count

Dimensions for 50W, 100W, and 150W LED Grow Lights

Image: Dimensions and general product information.

Model Length Width LEDs
50W20.5 cm (8 inches)10 cm (3.94 inches)50
100W24 cm (9.45 inches)13 cm (5.1 inches)96
150W28 cm (11 inches)14 cm (5.5 inches)144
LED counts for 50W, 100W, and 150W models

Image: LED counts per wattage model.

5. Setup and Installation

The PARKSON LED Grow Light is designed for self-contained installation. Follow these steps to set up your light:

  1. Unpack: Carefully remove all components from the packaging. Verify that you have the LED grow light, mounting bracket, and screws.
  2. Attach Bracket: Securely attach the mounting bracket to the back of the LED grow light using the provided screws.
  3. Mounting Location: Choose a suitable location for your grow light. Ensure it is away from damp, high-temperature, or flammable/explosive environments.
  4. Secure Mounting: Mount the light securely using the bracket. The bracket allows for angle adjustment to optimize light direction.
  5. Power Connection:
    • For USB Plug Models: Simply plug the USB connector into a compatible USB power adapter (not included) or port.
    • For EU Plug Models: Plug the light directly into a standard EU electrical outlet.
    • For 'Only Wire' Models: These models come with raw cables (live, neutral, ground). You will need to connect these wires to an appropriate power source or a compatible plug (e.g., a standard wall plug) according to local electrical codes. If you are unfamiliar with electrical wiring, please consult a qualified electrician.
  6. Final Check: Before powering on, double-check all connections and ensure the light is stable.
Components of the LED Grow Light including the light unit, mounting bracket, and screws

Image: Unboxed components including the light, bracket, and screws.

Side view of the LED Grow Light with the mounting bracket attached

Image: LED Grow Light with attached mounting bracket.

6. Operating Instructions

Once installed, operating your PARKSON LED Grow Light is straightforward:

  1. Power On/Off: For models with a USB controller, use the 'ON/OFF' button on the inline controller to turn the light on or off. For 'Only Wire' models, the light will turn on when power is supplied to the connected plug/source.
  2. Brightness Adjustment: Use the brightness control buttons on the USB inline controller to adjust the light intensity. You can typically adjust brightness from 25% to 100% to suit your plants' needs at different growth stages.
  3. Light Spectrum: The light provides a full spectrum (400-680nm) with optimized blue and red wavelengths to support all phases of plant development, from germination to fruiting.
Visual representation of brightness adjustment levels from 100% to 25%

Image: Brightness adjustment from 100% to 25%.

Full spectrum light graph and plant growth stages

Image: Full spectrum light wavelength range and illustration of plant growth stages.

7. Maintenance

  • Cleaning: Ensure the light is turned off and unplugged before cleaning. Gently wipe the surface of the light with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Inspection: Periodically inspect the power cord and connections for any signs of damage. If any damage is found, discontinue use and contact support.
  • Storage: If storing the light for an extended period, ensure it is clean, dry, and stored in a cool, safe place away from direct sunlight and extreme temperatures.

8. Troubleshooting

Light does not turn on:
Ensure the power supply is connected correctly and the outlet is functioning. For USB models, check the inline controller's ON/OFF button. For 'Only Wire' models, verify the wiring connection to the power source.
Light output is weak or not as expected:
Check the brightness setting on the USB inline controller (if applicable). Ensure the light is positioned at an optimal distance from your plants. Note that some users have reported actual wattage draw being lower than the advertised wattage (e.g., 20W for a 50W model). While the light is designed for plant growth, actual output may vary.
LEDs are burned out or damaged:
If individual LEDs appear damaged or non-functional, this may indicate a defect. Contact customer support for assistance.
Light does not produce UV effect:
This LED Grow Light is designed to provide a full spectrum for plant growth, primarily blue and red wavelengths. It is not a dedicated UV lamp and will not cause neon objects to glow. Its purple hue is characteristic of its optimized spectrum for photosynthesis.

9. User Tips

  • For 'Only Wire' models, you will need to purchase a separate power cable and connect it directly to the light's raw wires. If unsure, consult an electrician.
  • The light is suitable for autoflowering plants.
  • Many users find the light to be very bright and effective for plant growth.
  • Consider using a timer for automated on/off cycles, especially for 'Only Wire' models or if the USB controller does not retain its 'on' state after power loss.

10. Frequently Asked Questions (FAQ)

Q: Can I set the light to default to 'on' when it receives power, without manually pressing a button?
A: For models with an inline USB controller, the light typically requires the 'ON' button to be pressed after power is supplied. For 'Only Wire' models, the light will turn on automatically when power is applied to the connected plug/source, allowing for automation with an external timer.
Q: What is the actual wattage of the 50W model?
A: While advertised as 50W, some users have reported the actual power draw to be closer to 20W or even 6W. The light is designed to be effective for plant growth, but actual power consumption may vary from the nominal rating.
Q: What is the weight of the 50W model?
A: The package weight for the product is approximately 0.418 kg. The individual unit weight may be less.

11. Warranty and Support

The PARKSON LED Grow Light comes with a 3-year warranty. For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Please refer to the original purchase documentation for specific contact details.

A detailed user manual in PDF format is available for download. You can access it via the following link: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.