ThinkRider X2-MAX

Contents

ThinkRider X2Max Smart Bike Trainer

Model: X2-MAX

Introduction

The ThinkRider X2Max is a high-performance smart direct-drive bike trainer designed to provide a realistic and immersive indoor cycling experience. With its built-in power meter, quiet operation, and compatibility with popular cycling software, the X2Max allows you to train effectively and enjoy virtual rides from the comfort of your home.

ThinkRider X2Max Smart Bike Trainer with a road bike mounted

Figure 1: ThinkRider X2Max Smart Bike Trainer in use.

Video 1: ThinkRider X2Max Smart Bike Trainer product demonstration, showing portability, easy setup, bike mounting, quiet operation, and software compatibility.

What's in the Box

Please check the contents of your package against the list below:

  • 1 x X2 Smart Bike Trainer
  • 1 x Quick Release Adapters (supports 130/135mm)
  • 1 x Thru Axle Adapters (supports 142/148mm)
  • 1 x Power Adapter
  • 1 x 8-9-10 Speed Washer
  • 1 x Instruction Manual (PDF available online)
Diagram showing contents of the ThinkRider X2Max package

Figure 2: Package contents of the ThinkRider X2Max Smart Bike Trainer.

Setup

1. Trainer Assembly

  1. Carefully remove the trainer from its packaging.
  2. Attach the two support legs to the main unit using the provided hardware. Ensure they are securely fastened for stability.

2. Cassette Installation (Cassette Not Included)

The ThinkRider X2Max does not include a cassette. You will need to purchase and install a cassette compatible with your bicycle's drivetrain (e.g., Shimano, SRAM). Use appropriate tools (cassette lockring tool and chain whip) for installation. If your cassette is 8, 9, or 10-speed, use the provided speed washer before installing the cassette.

3. Bike Installation

The X2Max supports both quick release and thru-axle bicycles. Select the appropriate adapters for your bike:

  • Quick Release: Use the 130mm or 135mm quick release adapters.
  • Thru Axle: Use the 142mm or 148mm thru-axle adapters.

Remove the rear wheel from your bicycle. Carefully align your bike's rear dropouts with the trainer's axle and secure it using your bike's quick release skewer or thru-axle. Ensure the chain is properly seated on the trainer's cassette.

4. Power Connection

Connect the power adapter to the trainer and plug it into a standard electrical outlet. The trainer will power on automatically.

Operating Instructions

1. Connecting to Cycling Software

The ThinkRider X2Max is compatible with most popular cycling software and systems via ANT+ or Bluetooth. This includes:

  • Compatible Apps: Onelap, Zwift, Kinomap, BKOOL Cycling, Rouvy, Wahoo SYSTM, FulGaz, TrainerRoad, ThinkRider App.
  • Compatible Systems: Windows, Android, Apple (iOS/macOS).
  • Compatible Smart Cycling Computers: Garmin, Bryton.
Image showing compatibility with various cycling software and systems

Figure 3: ThinkRider X2Max software and system compatibility.

To connect:

  1. Open your preferred cycling application on your device (computer, tablet, smartphone).
  2. Ensure Bluetooth or ANT+ is enabled on your device.
  3. In the app's device pairing menu, search for the ThinkRider X2Max. It should appear as a power meter, speed sensor, and controllable trainer.
  4. Pair the trainer.

2. Calibration

For accurate power readings, it is recommended to perform a spin-down calibration periodically. Refer to your cycling software's instructions for how to initiate a spin-down calibration. The ThinkRider app can also be used for calibration.

3. Training Modes

  • ERG Mode: The trainer automatically adjusts resistance to maintain a target wattage, regardless of your speed or cadence.
  • Simulation Mode: The trainer simulates the gradient of virtual courses, providing a realistic feel for climbs and descents.

4. Noise Level

The ThinkRider X2Max operates quietly. At a speed of 30km/h, the noise level is approximately 56-57 dB, ensuring minimal disturbance during your training sessions.

Maintenance

  • Keep the trainer clean by wiping it down with a damp cloth after each use to remove sweat and dust.
  • Ensure the area around the trainer is free from obstructions.
  • Periodically check all bolts and connections to ensure they are secure.
  • Store the trainer in a dry, cool place when not in use.

Troubleshooting

  • Trainer Not Connecting: Ensure the trainer is powered on, Bluetooth/ANT+ is enabled on your device, and no other apps are currently connected to the trainer. Try restarting your device and the cycling app.
  • Inaccurate Power Readings: Perform a spin-down calibration. Ensure your bike's drivetrain is clean and well-maintained.
  • Lag in Resistance Changes (Simulation Mode): This can sometimes occur with steep gradient changes. Ensure your software and trainer firmware are up to date.
  • Calibration Issues with ThinkRider App: If you experience difficulty calibrating with the ThinkRider app, try using the calibration function within your preferred cycling software (e.g., Zwift, MyWhoosh).

Specifications

FeatureSpecification
Max Power Output2000 Watts
Max Simulated Incline18%
Power Accuracy±2%
Noise Level (at 30km/h)56-57 dB
ConnectivityANT+, Bluetooth
Dimensions (L x W x H)49 x 44 x 54 cm
Weight16 kg
Cassette CompatibilityShimano/SRAM 8/9/10/11 speed (cassette not included)
Axle CompatibilityQuick Release (130/135mm), Thru Axle (142/148mm)
Dimensions of the ThinkRider X2Max Smart Bike Trainer

Figure 4: Dimensions and weight of the ThinkRider X2Max.

Performance specifications of the ThinkRider X2Max Smart Bike Trainer

Figure 5: Performance capabilities including climb simulation and analog power.

User Tips

  • Adapter Setup: If the adapter instructions are unclear, search for online videos or guides specific to smart trainer axle adapter installation for visual assistance.
  • Cassette Purchase: Remember to purchase a cassette that matches your bike's gearing (e.g., 11-speed Shimano) as it is not included with the trainer.
  • ERG Mode Sensitivity: Be aware that ERG mode might feel more sensitive or fluctuate more at lower power levels compared to other trainers; this is normal behavior.
  • Virtual Shifting: If using a virtual cassette like the VS200, note that it may be inhibited during established workouts on platforms like Zwift, only allowing changes in free routes.
  • Calibration Alternatives: If you encounter issues calibrating with the ThinkRider app, try using the calibration function within your preferred cycling application (e.g., MyWhoosh, Zwift).

Warranty and Support

For warranty information and technical support, please refer to the official ThinkRider website or contact your retailer. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is available for download from the seller's product page or the ThinkRider official website. This document provides additional in-depth instructions and diagrams.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.