4DRC F15

Contents

4DRC F15 8K Camera Drone User Manual

Model: F15 | Brand: 4DRC

1. Safety Warnings and Guidelines

Please read all warnings carefully before operating the aircraft.

  1. The packaging and instructions contain important information and should be retained.
  2. You are responsible for ensuring that this aircraft does not cause damage to others or property.
  3. During commissioning and installation, the aircraft must be operated strictly in accordance with the operating manual. Maintain a distance of 2-3 meters between the aircraft and the user or others during flight. Avoid collisions with heads, faces, or bodies during flight or landing, which could cause injury.
  4. Our company and the seller assume no responsibility for any loss, damage, or personal injury caused by improper use or operation.
  5. Children should be supervised by an adult when operating the aircraft. This product is not intended for children under the age of 14.
  6. Please follow the instructions in the manual or packaging for proper installation and use. Some parts should be assembled by an adult.
  7. This product contains small parts; keep them out of the reach of children to prevent accidental ingestion or choking.
  8. Playing on the road or in areas with accumulated water is strictly prohibited to prevent accidents.
  9. Please promptly remove packaging materials to prevent harm to children.
  10. Do not disassemble or modify the aircraft, as this may cause the aircraft to malfunction.
  11. The charging cable must be plugged into the designated power source (5V→2A) as indicated on the product label.
  12. Using other charging cables may damage the battery and may result in an accident.
  13. The charging cable is not a toy.
  14. Rechargeable batteries must be charged under adult supervision and away from flammable materials. Leaders must remain within the supervision area during charging.
  15. Do not short-circuit or squeeze the battery to prevent explosion.
  16. Do not mix different types of lithium batteries.
  17. The aircraft uses rechargeable lithium batteries, which must be unplugged for charging.
  18. Do not short-circuit, disassemble, or dispose of batteries in fire. Do not store batteries in hot or heated areas (such as in a fire or near heating devices).
  19. The aircraft should be operated as far away as possible from other electrical equipment and magnetic objects, as they may interfere with each other.
  20. Maintain a safe distance from high-speed propellers to avoid the risk of entanglement or cuts.
  21. The motor is a heat-generating component; do not touch it to avoid burns.
  22. Avoid direct exposure to the light-emitting diode laser beam.
  23. Do not use the model near your ears! Misuse may cause hearing damage.
  24. The battery must be charged using the USB cable provided by our company. Failure to do so may result in severe battery damage and may lead to accidents.
  25. To ensure the magnetic environment requirements for aviation radio stations, the use of model remote controls within the city should be stopped during periods when national authorities issue radio control orders.
  26. When the aircraft battery is depleted, be sure to turn it off, unplug it, and let it sit for 30 minutes before charging. Failure to do so may damage the battery.

⚠️ Not suitable for children under 36 months.

Important Note on Flight Restrictions:

To ensure the electromagnetic environment requirements for aviation radio stations, the use of all models and drones is prohibited (10 kilometers on either side of the airport runway centerline and 20 kilometers at each end of the runway), as well as within civil aviation routes and airways. The use of all models and drones is prohibited in no-fly zones declared by relevant national authorities.

2. Product Overview

The 4DRC F15 is a lightweight, foldable quadcopter equipped with an 8K camera and a 3-axis gimbal, designed for high-quality aerial photography and stable flight. It features GPS smart follow, brushless motors, and a 5.5" touch remote for intuitive control.

4DRC F15 Drone with 5.5 inch Touch Remote

Image: 4DRC F15 Drone with 5.5 inch Touch Remote, highlighting its new release status, 30 min flight time, 10000M range, and sub-249g weight.

8K HDR Camera Lens

Image: Detail of the Cinema-Grade Imaging 8K HDR camera lens with F/1.7 aperture.

5.5 inch Touch Remote Control

Image: The 5.5 inch Touch Remote Control, featuring 10KM extreme transmission range, 8K gimbal stabilization, and a touch display.

AI Vision Features

Image: AI Vision features including Shadow Tracking, AI Focus Lock, AI ActiveTrack, AI Orbit Mode, One-Tap Take Off, WiFi Transmission, One-Tap RTH (Return to Home), Modular Battery, Image Tracking, Flight Path Planning, Gesture Photo, and Dual-Camera Switch.

Collision Protection and Brushless Motors

Image: Collision Protection with child-safe blades, brushless motors, and a modular battery providing 32 minutes of flight time per battery.

2.1. Included Accessories List

  • Aircraft x1
  • Remote control x1
  • Lithium battery x1
  • Type-C charging cable x1
  • Type-C transmission cable x1
  • LIGHTNING transmission cable x1
  • Fan blades x4
  • Screwdriver x1
  • Instruction manual x1
F15 Basic Pack Contents

Image: Contents of the F15 Basic Pack, including drone, remote, battery, cables, lens cover, screwdriver, spare propellers, propeller guards, 32GB MicroSD card, and card reader.

2.2. Names of Aircraft Parts

  1. Fan blade
  2. Housing
  3. Camera
  4. Optical flow camera
  5. Battery
  6. Aircraft power switch
  7. Motor

2.3. Names of Remote Control Parts

  1. Antenna
  2. Left stick
  3. Right stick
  4. Unlock (long press)
  5. Power switch (long press)
  6. Speed gear
  7. Return to home (short press)
  8. Power indicator
  9. GPS indicator
  10. Headless indicator
  11. Return indicator light
  12. Charging port
  13. Display
  14. microSD card slot
  15. Transmission port
  16. Zoom
  17. Horizontal calibration (short press) / Geomagnetic calibration (long press)
  18. Camera angle fine-tuning
  19. GPS switch (long press)

3. Setup

3.1. Battery Charging Instructions

3.1.1. Aircraft Lithium Battery Charging

Plug the USB connector of the USB charging cable into a USB port (computer or 5V 2A power adapter) and connect the other end to the battery socket. The red indicator light on the module battery will light up during charging and turn off when fully charged.

Note: When the aircraft is not flying, do not install the battery inside the aircraft to avoid battery damage.

3.1.2. Remote Control Battery Charging

Plug the USB connector of the USB charging cable into a USB port (computer or 5V 2A power adapter) and connect the other end to the charging port of the remote control. All indicators will light up in sequence during charging and remain steadily on when fully charged. Ensure the remote control is turned off before charging.

Warning: You must use the aircraft charging cable provided by our factory to charge. Do not use other charging cables. Remember to avoid accidents (identify the charging port and do not plug it into the transmission port to charge).

3.2. Connecting the Remote Control to a Mobile Phone

The remote control is equipped with Type-C and LIGHTNING data cables. Use the appropriate cable to connect your mobile phone to the remote control. This connection is for image transmission; it is forbidden to use the image transmission port to charge the remote control.

3.3. Installation of Aircraft Components

3.3.1. PTZ Protective Cover Installation

Follow the steps by pressing down and pulling outwards at the same time to install the PTZ protective cover.

Note: Be sure to remove the gimbal protective cover before turning on the device.

3.3.2. Fan Blade Installation

Unscrew the screws and remove the old fan blades. Install new blades, ensuring they match the A and B markings on the drone arms. Incorrect installation will prevent the aircraft from taking off.

3.3.3. Guardrail Installation

Install the protective frame components according to the steps. Ensure they are properly installed before flying to prevent them from falling during flight.

Note: Please make sure to install the protective ring before flying!

3.4. Unfolding Steps

From the storage state, expand the front and rear arms in sequence. Then, install the joystick and unfold the antenna. Finally, install a phone holder if desired.

3.5. APP Software Download and Installation

Download the "4DRC PRO" app. For Android, scan the QR code and open the download in your browser. For Apple systems, scan the QR code to install from the App Store.

3.6. Pre-flight Preparation (Using the Remote Control)

  1. Power On and Linking: Turn on the aircraft and the remote controller. Place the aircraft on a level surface. The aircraft will automatically enter frequency binding state (flashing fuselage light). The remote controller's power indicator will flash. Wait approximately 50 seconds for binding to complete (remote controller will beep, aircraft indicator light will be solid).
  2. Level Calibration: Short press the horizontal calibration button on the remote controller. The red light on the aircraft will flash quickly. Calibration is complete when the red light stays on and the remote controller beeps.
  3. Geomagnetic Calibration: Press and hold the geomagnetic calibration button. The red light on the aircraft will flash twice quickly. Hold the aircraft horizontally and rotate it clockwise until the red light flashes slowly and the remote controller beeps. Then, lift the aircraft with its tail pointing upward and rotate it clockwise until the red light is solid and the remote controller beeps. This completes the compass calibration.
  4. Satellite Search (Default GPS Mode): In GPS mode, the GPS indicator light on the remote controller will flash slowly, indicating satellite search. The aircraft indicator light will remain on. When the remote controller GPS indicator light remains on and the aircraft indicator light flashes red, the search is successful, and the remote controller will beep. You can then arm the aircraft and take off.

Note: You need to wait for at least a few minutes for the first satellite search. You can only take off when the satellite search signal on the APP interface is more than three bars (the remote control displays more than 10 satellite indexes, and the image transmission signal is less than 3 bars).

4. Operating Instructions

4.1. APP Control Interface Function Introduction

The "4DRC PRO" app provides a comprehensive control interface. Key functions include:

  • Satellite Signal: Indicates GPS signal strength.
  • Wi-Fi Signal: Indicates Wi-Fi connection strength.
  • Aircraft Power: Displays remaining battery life.
  • Parameter Settings: Adjust various flight parameters.
  • More Flight Status Features: Access advanced flight data.
  • Return: Initiates Return to Home function.
  • Takeoff/Landing: One-touch takeoff and landing.
  • One-touch Return Unlock: Unlocks the aircraft for flight.
  • Map: Displays flight path and location.
  • Flight Distance: Shows current flight distance.
  • Photo/Video Shutter: Controls camera functions.
  • Media Library: Access recorded photos and videos.
  • Filter Flight Recording Zoom: Apply filters and zoom during recording.
  • Follow: Activates intelligent follow mode.
  • Circumnavigation: Initiates orbital flight.
  • Find the Aircraft Speed Gear: Adjust flight speed.
  • Touch Joystick: Enables virtual joystick control.
  • 3D Reverse Shot: Special camera mode.
  • Unlock Gesture to Take Photos: Gesture control for photography.
  • Music: Add music to videos.
  • Lens Adjustment: Adjust camera lens angle.

4.2. Remote Control Operation Method

The remote control uses two joysticks for flight control. You can also view a virtual joystick on the APP interface by clicking the "More functions" icon and then the "joystick on/off" icon.

  • Left Joystick (Throttle): Pushing up increases main blade speed and aircraft rises. Pushing down slows main blade speed and aircraft descends.
  • Left Joystick (Rudder): Pushing left turns the aircraft's nose left. Pushing right turns the aircraft's nose right.
  • Right Joystick (Rudder): Pushing up moves the aircraft forward. Pushing down moves the aircraft backward.
  • Right Joystick (Rudder): Pushing right makes the aircraft fly to the right. Pushing left makes the aircraft fly to the left.

4.3. Speed Switching

When the aircraft takes off, it defaults to low speed mode. Press the speed gear button on the remote controller lightly to switch between three speed modes: low, medium (second "di" sound), and high (third "di di di" sound). You can also switch flight speed via the "More Functions" icon in the APP control interface.

4.4. One-Key Return

Press the return button on the remote control, and the aircraft will return to the airspace above the takeoff position. If flying below a safe altitude, it will automatically ascend before returning. If obstacles are present during descent, manually control the steering stick to avoid them and pull down the throttle to land. In the APP, click the "One-key return" icon to initiate or cancel the return.

Failure Return: If the remote control signal is interrupted for approximately 4 seconds, the aircraft will automatically return to a location with a signal and stop.

Low Battery Return: When the aircraft's battery is low, it will be forced to return to approximately 10 meters above the takeoff point. During Low Battery Return, the aircraft cannot be canceled.

4.5. Zoom Adjustment

Turn the zoom wheel on the remote control to adjust the image focus. In the APP, click the "Zoom" icon to enter focus adjustment and adjust the focal length as needed.

4.6. Lens Adjustment

Turn the camera angle fine-tuning dial on the remote control to adjust the lens angle. In the APP, click the "More functions" icon to enter lens adjustment and adjust the lens angle as needed.

4.7. One-Key Takeoff and Landing

In the APP, click the "One-key takeoff" icon to initiate takeoff. During flight, click this icon again for a slow, automatic landing.

4.8. Normal Mode Start/Stop (Indoor Operation)

For indoor operation, ensure the GPS indicator on the remote control is off. Press and hold the GPS button on the remote control until the GPS indicator goes out. Then, move the left and right joysticks outward to unlock, or press and hold the one-touch unlock button. Finally, push up the left joystick to start flying.

4.9. Multi-point Flight Mode

In GPS mode, tap the "More Features" icon in the APP to enter Multi-point Flight. The interface will switch to a map screen where you can set waypoints. After setting, click the Send icon, and the aircraft will automatically fly the preset path. You can control the aircraft's direction with the joystick during flight.

4.10. Orbital Flight Mode

In GPS mode, click the "More Functions" icon in the APP to enter Orbital Flight. The aircraft will automatically establish a radius, which can be adjusted in the APP. Press the right direction stick to the left or right to circle at the default speed. Press the orbit key again to end the orbit.

4.11. GPS Follow Mode

In GPS mode, click the "More Functions" icon in the APP to enter the follow function. The drone will automatically track the location of your mobile device. Tap the red icon to cancel following.

4.12. Gesture Recognition

When facing the camera lens, click the gesture photo button on the APP and perform the following gestures:

  • "Yeah" Gesture Photo: Stand about 3 meters in front of the camera and make the "Yeah" gesture. After recognition, a 3-second countdown will begin before taking pictures.
  • Palm Gesture Video Recording: Stand about 3 meters in front of the camera and raise your hand horizontally with five fingers together. Recording starts upon recognition. End recording by performing the gesture again (with a time difference greater than 3 seconds).

Special Tips: Aim at the lens from the front at a distance of about 2-3 meters in a well-lit environment with a good background for optimal gesture recognition.

4.13. MV Interface (Filters and Recording)

Click the "Filter Interface" icon in the APP to access various filters. You can apply mirror effects and start recording by clicking the record icon. After recording, the synthesized video or picture will be saved to the Media Library.

Special Tips: During recording, you can rotate the screen, switch filters, and turn on/off the joystick to control the aircraft's direction and height.

5. Maintenance

  • Battery Care: Always turn off the aircraft and unplug the battery after use. Allow the battery to cool for 30 minutes before recharging. Use only the provided charging cable. Store batteries in a cool, dry place away from heat sources.
  • Propeller Inspection: Regularly check propellers for damage or deformation. Replace any damaged blades immediately to ensure stable flight and prevent accidents.
  • Gimbal Protection: Always install the PTZ protective cover when transporting or storing the drone to prevent damage to the camera and gimbal.
  • Cleaning: Keep the drone and remote control clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • Storage: Store the drone in its original packaging or a suitable carrying case to protect it from physical damage.

6. Troubleshooting

ProblemReasonWorkaround
Aircraft indicator light is flashing, no response to operation1. Geomagnetic anomalies
2. The aircraft battery is low
1. Move the aircraft to an open area and recalibrate the geomagnetic field (refer to section 3.6).
2. Charge the battery.
Aircraft blades rotate but can't fly1. Low battery
2.1 Blade deformation
2.2 AB propeller installation error
1. Charge the battery.
2.1 Replace the Propeller Blades.
2.2 If the A blade is broken, replace the A blade. If the B blade is broken, replace the B blade. If the blades are incorrectly replaced, the aircraft cannot take off.
Aircraft vibrated violentlyBlade deformationReplacing the propeller blades.
Fine-tuning to the end but still unable to stabilize the aircraft1. Blade deformation
2. Motor failure
1. Replace the propeller blades.
2. Replace the motor.
Aircraft blades rotate but can't flyThe three-axis acceleration sensor failed due to impact to balanceAfter the aircraft is stationary for 5-10 seconds, or just align the magnetism and the level and you're good to go. Please refer to the instruction manual, 13.4 Horizontal Calibration Operation for the steps.

7. Specifications

FeatureSpecification
Brand Name4DRC
Model Number4D-F15
Drone Weightabout 160g
Takeoff Weightabout 245g
Video Capture Resolution8K UHD
Camera Mount Type3-Axis Gimbal
Flight Time20~30 minutes
Remote Distance5000M (5KM)
Control Channels4 channels
Motor TypeBrushless Motor
Charging Voltage7.4V
Charging Timeabout 240mins
Power SourceElectric
Is Electric (Battery Type)Lithium Battery
Is Batteries IncludedYes
Plugs TypeUSB
Controller BatteryUSB charging
Operator Skill LevelBeginner, Intermediate, Expert
Indoor/Outdoor UseIndoor-Outdoor
State of AssemblyReady-to-Go
FeaturesApp-Controlled, Auto Return, Follow Me, FPV Capable, GPS, Wi-Fi, Other
Anti-wind Ability<10km/h
Recommend Age14+y

8. User Tips

  • Extra Batteries: Many users inquire about purchasing extra batteries. It is highly recommended to acquire additional batteries for extended flight sessions, as the drone comes with one battery.
  • Charging Safety: Always use the provided charging cables and ensure the remote control is turned off during charging. There have been isolated reports of remote controls burning out due to improper charging practices.
  • Pre-Flight Checks: Double-check all connections, propeller installation, and battery levels before each flight to ensure a safe and stable experience.

9. Warranty and Support

For detailed warranty information, technical support, and service inquiries, please refer to the official product documentation or contact the 4DRC Official Store directly. A comprehensive user manual in PDF format is available for download: View User Manual (PDF).

Video: Official product demonstration of the 4DRC F15 drone, showcasing its features and flight capabilities.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.