1. Introduction
Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device.
In order to install, operate, and maintain the lighting safety correctly, we suggest that the installation and operation should be done by a verified technician and follow the instruction strictly.
⚠️ CAUTION! Keep this device away from rain and moisture!
⚠️ CAUTION! Unplug mains lead before opening the housing.
Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow carefully the instructions of this manual
Thank you for having chosen this professional moving head. You will find this to be a powerful and versatile device.
2. Setup and Installation
2.1 Unpacking and Included Accessories
Unpack the device. Inside the carton box you should find:
- One power cable
- One user manual
- One pcs lights (Note: Product may be sold in sets, verify quantity upon receipt)
- One pcs DMX cable
- One pcs omega bracket
Please check carefully that there is no damage caused by transportation. Should there be any, please consult your dealer and do not install this device.
2.2 Mounting Considerations
For added protection, mount the fixtures in areas outside walking paths, seating areas, or in areas where the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture, from a ceiling, or set on a flat level surface. Be sure this fixture is kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).
2.3 Mounting Points
Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself, as improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet.
The LED moving head provides a unique mounting bracket assembly that integrates the bottom of the base, the included 'omega bracket' and the safety cable rigging point in one unit.
3. Operating Instructions
3.1 DMX-512 Control Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving heads together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors.
DMX Wiring Diagram:
DMX Output 3-Pin XLR Socket:
- Pin 1: Ground
- Pin 2: Data (-)
- Pin 3: Data (+)
DMX Input 3-Pin XLR Socket:
- Pin 1: Ground
- Pin 2: Data (-)
- Pin 3: Data (+)
Ensure correct polarity for DMX+ and DMX- connections.
3.2 Control Panel and Menu Navigation
The device features an LED Display Screen for control and configuration. Use the navigation buttons (Up, Down, OK, ERR) to access and adjust settings.
3.3 Menu Instructions (Setting)
The main menu allows configuration of various operational modes and parameters:
Running Mode:
- DMX Mode: Utilizes 14 channels for precise control.
- Sound Control Mode: Can operate as a host and synchronize with other lights.
- Auto Mode (1-4): Pre-programmed demonstrations that can run independently or as a host.
- Random Mode: Can be used as a host and run with other lights.
Address Code:
- Set the DMX address code from 1-512.
Channel Mode:
- Set the DMX channel to 14 channels.
Sound Sensitivity:
- Adjust sound sensitivity from 1-99.
Movement Settings:
- Pan Reverse: Reverses the Pan movement direction.
- Tilt Reverse: Reverses the Tilt movement direction.
- Pan/Tilt Exchanges: Swaps Pan and Tilt functions.
Gobo/Color Wheel Settings:
- Code Wheel: Enable or disable encoding code wheel correction.
Signal Timeout:
- Choose to maintain or cut light when the console is disconnected or the host signal is lost.
Display & System Settings:
- Screen Saver: Activates screen saver.
- Colour Smooth: Enables smooth color transitions.
- Restore Factory Settings: Resets all settings to default.
3.4 Test Mode
In Test mode, initial values will change according to the selected self-take mode or console mode values. This allows for testing and adjustment in channel mode.
3.5 Offset Adjustments
Fine-tune the positioning and effects:
- Pan Set Offset: Adjusts offset in the Pan direction.
- Tilt Set Offset: Adjusts offset in the Tilt direction.
- Color Offset: Adjusts the offset of the color.
- Gobo Offset: Adjusts the offset of the gobo.
- Focus Offset: Adjusts the shift of focus.
- Magnification Lens & 7-Color Wheel Offset: Adjusts the offset for these components.
3.6 Advanced Settings
- Language Switch: Switch the menu language between Chinese and English.
- Screen Reverse Display: Switch the display direction of the screen.
- Hours Clear: Clears the total time of use.
- Top Protection Temperature: If the detected temperature exceeds the protection temperature, the brightness decreases automatically.
3.7 DMX Channel Map
The following tables detail the DMX channels and their corresponding functions and values:
| Channel | Function | Channel S (Value Range) | Explanation |
|---|---|---|---|
| 1 | Dimmer | 0-255 | Dimmer 0-255 |
| 2 | Strobe | 0-10 11-255 | No Strobe From slow to fast Strobe |
| 3 | Pan | 0-255 | Pan |
| 4 | Pan fine | 0-255 | 16bit Pan fine |
| 5 | Tilt | 0-255 | Tilt |
| 6 | Tilt fine | 0-255 | 16bit Tilt fine |
| 7 | Pan Tilt speed | 0-255 | Pan Tilt Speed adjustment |
| 8 | Color | 0-4 | White |
| 5-9 | White light + color 1 | ||
| 10-14 | Color 1 | ||
| 15-19 | Color 1+ color 2 | ||
| 20-24 | Color 2 | ||
| 25-29 | Color 2+ color 3 | ||
| 30-34 | Color 3 | ||
| 35-39 | Color 3+ color 4 | ||
| 40-44 | Color 4 | ||
| 45-49 | Color 4+color 5 | ||
| 50-54 | Color 5 | ||
| 55-59 | Color 5+ color 6 | ||
| 60-64 | Color 6 | ||
| 65-69 | Color 6+ color 7 | ||
| 70-74 | Color 7 | ||
| 75-79 | Color 7+ color 8 | ||
| 80-84 | Color 8 | ||
| 85-89 | Color 8+ color 9 | ||
| 9 | Gobo | 0-5 | White |
| 6-10 | Gobo 1 | ||
| 11-15 | Gobo 2 | ||
| 16-20 | Gobo 3 | ||
| 21-25 | Gobo 4 | ||
| 26-30 | Gobo 5 | ||
| 31-35 | Gobo 6 | ||
| 36-40 | Gobo 7 | ||
| 41-45 | Gobo 8 | ||
| 46-50 | Gobo 9 | ||
| 51-55 | Gobo 10 | ||
| 56-60 | Gobo 11 | ||
| 61-65 | Gobo 12 | ||
| 66-70 | Gobo 13 | ||
| 75-80 | Gobo 14 | ||
| 81-150 | Gobo shake 1-14 | ||
| 151-200 | Gobo clockwise fast to slow | ||
| 201-255 | Gobo clockwise slowly to fast | ||
| 10 | Focus | 0-255 | Focus |
| 11 | Magnification lens & 7-Color wheel | 0-127 | off |
| 128-191 192-255 | Magnification lens 7-Color wheel | ||
| 12 | Prism | 0-127 | off |
| 128-136 137-255 | 24 Prism Prism is slow to fast rotate | ||
| 13 | Macro function | 0-5 | NO effect |
| 6-55 | Auto 1 | ||
| 56-105 | Auto 2 | ||
| 106-155 | Auto 3 | ||
| 156-205 206-255 | Auto 4 Random mode | ||
| 14 | Restoration | 0-25 | NO effect |
4. Maintenance
4.1 Temperature Management
The device includes a Top Protection Temperature feature. If the detected temperature exceeds the set protection temperature, the brightness of the light will automatically decrease to prevent overheating and prolong the lifespan of the LED.
4.2 General Care
Regular cleaning of the lens and exterior casing is recommended to maintain optimal performance and light output. Ensure the device is unplugged and cooled down before any cleaning or maintenance.
5. Troubleshooting
5.1 System Information and Resets
The system information menu provides details such as software version, lighting use time, and turning on time. The total lighting use time can be cleared in the high-level settings.
If you encounter issues with movement or functionality, the following reset options are available:
| Value Range | Reset Function |
|---|---|
| 26-76 | Motor reset |
| 77-127 | XY Motor reset |
| 128-255 | Completely reset |
Note: The password for 'OFF set' is 123456.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | HYU-150B |
| Voltage | AC110-240V 50-60Hz |
| Light Source | 180W White LED |
| Total Power | 200W |
| Control Panel | LED Display Screen |
| Pan Scan | 540° (16bit) Electric correction |
| Tilt Scan | 270° (16bit) Electric correction |
| Color Wheel | 11 Colors + Half color effect + Color rotating speed. Infinite rotating |
| Gobo Wheel | 14 Gobos + Shake + Gobo Rotating speed. Infinite rotating |
| Prism | 1pcs 24 Rotating prisms |
| Lenses | 1PCS 6 X Magnification lens, 1PCS 7-Color wheel |
| Beam Zoom Angle | 1.5°-15° |
| Functions | Sound control, Auto, Master/Slave, DMX 512, RDM |
| Strobe | 25 times/sec |
| DMX Channel | 14 channels |
| Dimmer | 0-100% With regulated constant color control |
| Net Weight (N.W) | 6.7 KG |
| Gross Weight (G.W) | 7.8 KG |
| Packing Size | 41*28*27.5cm |
| Is Bulbs Included | Yes |
| Power Source | AC |
| Luminous Flux | 2000-82000 |
| High-concerned chemical | None |
| Installation Method | Self-contained |
| Certification | CE, FCC, RoHS, UL, WEEE, NONE |
| Style | DMX Stage Light |
| Origin | Mainland China |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
7. User Tips
- For optimal visual effects, this product performs best when used with a smoke machine.
- Some users have noted that the fans can be a bit noisy; consider this for sound-sensitive environments.
- Be aware that using the 6-color wheel may significantly reduce overall brightness.
- When the 24-prism motor is off, the prism may move to the side and rotate slowly but continuously. This is part of its design.
- If you are looking for DMX profiles (like SSL files), you may need to contact the seller or community forums for assistance.
- The product is often sold in sets (e.g., 2 pieces), so verify your order quantity upon receipt.
8. Warranty and Support
Notice: If you have any questions during the use, please contact your vendor or the manufacturer for support.