1. Product Overview
This automotive chip accessory (hereinafter referred to as "the Product") is a high-precision electronic component specially designed for automotive electronic systems. It is compatible with most mainstream passenger cars, commercial vehicles and new energy vehicles, and is mainly used to optimize the performance of automotive engine control, power management, intelligent driving assistance and other systems, improve operational stability, reduce energy consumption, and ensure the safe and efficient operation of the vehicle.
The Product adopts industrial-grade high-temperature and anti-interference design, which can adapt to the harsh working environment inside the vehicle (temperature range: -40°C~125°C) and has strong resistance to vibration, humidity and electromagnetic interference. It complies with international automotive electronic standards (ISO 26262) and has passed strict quality testing to ensure long-term reliable use.

2. Safety Precautions
- Only professional automotive electronic technicians with relevant qualifications are allowed to install, disassemble and maintain the Product. Unauthorized operation may cause damage to the Product, vehicle electronic system, or even safety hazards such as vehicle failure and fire.
- Before installing or disassembling the Product, please turn off the vehicle engine, cut off the vehicle power supply (disconnect the battery negative electrode), and wait for the vehicle electronic system to cool down completely (at least 15 minutes) to avoid electric shock or component burnout.
- Do not touch the chip pins with bare hands. The static electricity on the human body may damage the internal circuit of the chip. Please wear an anti-static wristband and anti-static gloves during operation.
- The Product must be installed in a dry, well-ventilated position inside the vehicle, away from high-temperature areas (such as engine, exhaust pipe) and flammable and explosive materials (such as fuel pipelines, oil tanks).
- Do not modify, disassemble, or reshape the Product by yourself. Any unauthorized modification will void the product warranty and may lead to product failure.
- If the Product is damaged, deformed, or fails (such as abnormal heating, poor contact), please stop using it immediately, disconnect the power supply, and contact the after-sales service department for professional inspection and maintenance. Do not continue to use the damaged product.
- Keep the Product away from children and pets to avoid accidental ingestion or damage.
3. Product Specifications
| Item | Specification |
|---|---|
| Product Model | ACM-2026 Series |
| Working Voltage | 9V ~ 16V DC |
| Working Temperature | -40°C ~ 125°C |
| Storage Temperature | -55°C ~ 150°C |
| Power Consumption | ≤0.8W (Standby: ≤0.1W) |
| Pin Quantity | 16 Pins / 24 Pins (Optional) |
| Protection Level | IP65 |
| Compatibility | Mainstream gasoline/diesel vehicles, new energy vehicles (EV/HEV/PHEV) |
| Service Life | ≥10 Years / 200,000 Kilometers |
4. Installation Instructions
4.1 Preparation Before Installation
- Check whether the Product model matches the vehicle model. Confirm that the Product is intact (no damage to the shell, no bending of pins, no looseness of components) and the packaging is intact.
- Prepare the necessary tools: anti-static wristband, anti-static gloves, screwdriver set, wire stripper, multimeter, insulating tape, and mounting bracket (included in the product package).
- Park the vehicle on a flat and safe ground, pull up the handbrake, turn off the engine, and disconnect the battery negative electrode to cut off the vehicle power supply.
- Clean the installation position (suggested: vehicle engine compartment control box, instrument panel internal junction box), remove dust, oil stains and other debris to ensure the installation surface is flat and dry.

4.2 Installation Steps
- Fix the mounting bracket to the selected installation position with screws, ensuring that the bracket is firm and does not shake (avoid installing in the position with strong vibration).
- Wear anti-static wristband and gloves, take out the Product, and align the chip pins with the corresponding socket of the vehicle electronic system. Ensure that the pin direction is correct (do not reverse or misinsert), and gently insert the Product into the socket until it is firmly connected (no looseness).
- Use insulating tape to wrap the connection part of the socket and the Product to prevent dust, water vapor and loose contact. Do not wrap the heat dissipation part of the Product to avoid affecting heat dissipation.
- Reconnect the battery negative electrode, start the vehicle engine, and use a multimeter to detect whether the Product works normally (check the working voltage, current and other parameters to ensure they are within the specified range).
- After the vehicle runs stably for 5~10 minutes, check again whether the Product has abnormal phenomena such as overheating, abnormal noise and poor contact. If there is any abnormality, stop the engine immediately, disconnect the power supply, and check the installation and connection.

4.3 Identifying Your Camera Model
To ensure correct installation, it is crucial to identify your specific camera model (A kit, B kit no LKAS, or improved B kit). Please check the label on your original camera. If you are unsure, send a photo of the camera label to customer service for confirmation.




5. Operation and Usage
The Product is automatically activated after the vehicle is started, and no manual operation is required during normal use. It will automatically cooperate with the vehicle electronic system to work, optimize the system performance, and realize functions such as power adjustment, energy saving and emission reduction, and stability improvement.
Note: During the use of the vehicle, if the vehicle dashboard displays an electronic system fault light (related to the Product), please stop using the vehicle in a safe area, turn off the engine, check the connection of the Product, and if the fault persists, contact the after-sales service department.


6. Maintenance and Care
- Regular inspection: It is recommended to check the Product every 6 months or 10,000 kilometers. Focus on checking the connection part (whether it is loose, corroded), the shell (whether it is damaged, deformed) and the heat dissipation situation (whether there is blockage).
- Cleaning: Use a dry soft cloth to wipe the surface of the Product regularly to remove dust and debris. Do not use water, organic solvents (such as alcohol, gasoline) to clean the Product, so as not to damage the internal circuit and shell.
- Storage: If the Product is not used for a long time, it should be stored in a dry, cool, well-ventilated environment, away from high temperature, humidity, direct sunlight and electromagnetic radiation. It should be placed in the original packaging and accompanied by anti-static packaging materials.
- Avoid long-term exposure of the Product to harsh environments (such as high temperature, high humidity, strong corrosion), which will affect the service life of the Product.
7. Troubleshooting
| Fault Phenomenon | Possible Causes | Troubleshooting Methods |
|---|---|---|
| Product fails to work, vehicle electronic system fault light is on | 1. Incorrect pin insertion or loose connection; 2. Vehicle power supply is abnormal; 3. Product is damaged | 1. Turn off the engine, disconnect the power supply, reinsert the Product and check the connection; 2. Use a multimeter to detect the vehicle power supply (9V~16V DC); 3. If the above methods are invalid, contact after-sales service to replace the Product |
| Product overheats during use | 1. Installation position is close to high-temperature area; 2. Heat dissipation part is blocked; 3. Abnormal current | 1. Reinstall the Product to a position away from high-temperature area; 2. Clean the heat dissipation part of the Product; 3. Detect the working current with a multimeter, if it exceeds the specified range, stop using it and contact after-sales service |
| Vehicle performance is not improved after installation | 1. Product model does not match the vehicle; 2. Installation is incorrect; 3. Vehicle electronic system has other faults | 1. Check whether the Product model is compatible with the vehicle; 2. Recheck the installation steps and connection; 3. Inspect the vehicle electronic system for other faults |
| Poor contact between Product and socket | 1. Dust or oil stains on the pins; 2. Socket is loose or corroded | 1. Turn off the power supply, pull out the Product, wipe the pins with a dry soft cloth, and reinsert it; 2. Check the socket, if it is corroded or loose, replace the socket |
8. User Tips
- This repair kit can save significant costs compared to replacing the entire camera module from a dealer.
- Installation is straightforward for those with basic mechanical skills and the right small screwdrivers.
- Take your time during installation and carefully follow all instructions, including any provided videos.
- Verify your specific camera model (A kit, B kit, improved B kit) by checking the label on your original camera before ordering. If unsure, contact customer service with a photo of the label.
- In many cases, recalibration is not needed after correct installation.
9. Frequently Asked Questions (FAQ)
- Q: What is the difference between the models (A kit, B kit, improved B kit)?
- A: You can judge the difference by the shape of the camera's label. The improved B kit is designed to restore LKAS function and typically does not require calibration.
- Q: Is this item compatible with a Honda Pilot 2021?
- A: Yes, the improved B kit is suitable for the Honda Pilot 2021. It is easy to install, restores LKAS function, and generally does not require calibration.
- Q: Does this fit my 2019 Honda Odyssey EXL?
- A: Yes, the improved B kit is suitable for the 2019 Honda Odyssey EXL. It is easy to install, restores LKAS function, and generally does not require calibration.
- Q: How do I know what model my camera is?
- A: You can identify your camera model by checking the label on your original camera. If you are unsure, please contact customer service with a photo of the label for assistance.
- Q: Which kit fits a 2017 Acura MDX?
- A: The kit has been reported to work perfectly for a 2017 Acura MDX, clearing all error messages after installation.
- Q: Does it fit a 2019 Honda HR-V?
- A: Please contact customer service with your camera's label information to confirm compatibility for a 2019 Honda HR-V.
- Q: Is it compatible with a 2017 Acura TLX or 2018 Acura TLX?
- A: Please contact customer service with your camera's label information to confirm compatibility for Acura TLX models.
- Q: Is it compatible with a 2018 Honda Odyssey four-cylinder?
- A: Please contact customer service with your camera's label information to confirm compatibility for a 2018 Honda Odyssey four-cylinder.
10. Warranty and Support
Warranty Terms
The Product provides a 3-months warranty period from the date of purchase. During the warranty period, if the Product fails due to manufacturing defects or quality problems (excluding man-made damage, improper operation, unauthorized modification, and damage caused by natural disasters, accidents, etc.), the after-sales service department will provide free repair or replacement services.
The following situations are not covered by the warranty:
- Damage caused by improper installation, disassembly, operation or maintenance by non-professional personnel;
- Damage caused by modification, disassembly, reshaping or refitting of the Product;
- Damage caused by harsh environment (such as high temperature, high humidity, corrosion, strong vibration) beyond the product specifications;
- Damage caused by natural disasters (earthquake, flood, typhoon, etc.), accidents (vehicle collision, fire, etc.) or other force majeure factors;
- The product shell, packaging, accessories are damaged, but the product itself works normally;
- The purchase invoice or warranty card is lost, or the information on the invoice does not match the Product;
- The warranty period has expired.
Customer Support
- After-Sales Service Hotline: +852 5247 6412 (24-hour service)
- Email: mindykeke@gmail.com
- WhatsApp: +852 5247 6412 (for more technical documents and product information)
- Service Time: Monday to Friday, 9:00 AM ~ 6:00 PM (local time)
11. Disclaimer
The Product is designed and produced in accordance with international automotive electronic standards, but we do not assume any liability for the following situations:
- Losses caused by improper use, unauthorized operation or modification of the Product;
- Losses caused by the incompatibility between the Product and the vehicle electronic system (please confirm the compatibility before purchase);
- Indirect losses (such as vehicle downtime, transportation costs, business losses, etc.) caused by product failure;
- Losses caused by force majeure factors such as natural disasters and accidents.
The company reserves the right to modify the content of this manual without prior notice. The latest version of the manual shall prevail on the official website.
Date of Issue: 2026.01
Version: V1.0