1. Introduction
Thank you for choosing the Laiwen Sound Amplifier. This device has undergone strict quality inspection to ensure optimal performance. This manual provides essential information on how to use, maintain, and troubleshoot your sound amplifier, ensuring you get the best auditory experience.
The Sound Amplifier is designed to conform to the structure of the human ear canal, making it comfortable and discreet. It is suitable for use in both quiet and noisy environments.
Main Use and Working Principle: The Sound Amplifier consists of a microphone, an integrated circuit, and a receiver. Sound signals are converted into electrical signals by the microphone, amplified by the integrated circuit, and then converted back into audible signals by the receiver.
2. Important Safety Information
Please read all safety warnings carefully before using this device.
- Warning: If you are younger than 18, do not use this device. Consult a doctor, preferably an ear-nose-throat doctor (ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
- Keep small parts out of children's reach to prevent swallowing.
- Do not place the Sound Amplifier in a microwave oven or fire, as it may cause an explosion.
- Do not place the Sound Amplifier in your mouth. It contains a battery; if accidentally swallowed, consult a doctor immediately. Swallowing the battery can be life-threatening.
- This Sound Amplifier must only be used by the intended person.
- Users who have undergone ear surgery should use the Sound Amplifier under the guidance of a professional doctor.
- Children cannot wear the Sound Amplifier without adult guidance.
- Mental patients should consult a physician before wearing a Sound Amplifier.
- Do not use the Sound Amplifier in explosive or oxygen-enriched atmospheres.
- Remove the Sound Amplifier immediately if battery leakage occurs.
- Not intended for use by infants under 36 months.
- Do not throw the Sound Amplifier into a fire as batteries may explode.
- The Sound Amplifier contains a Ni-MH battery. Do not dispose of it with household waste. Recycle responsibly to promote sustainable reuse of materials and prevent environmental harm.
3. Package Contents

Please check that all items are present in your package:
- Charging Case
- Hearing Aids (1 pair)
- Earplugs (6 pieces, various sizes)
- Cleaning Sweep
- Charging Cable (Micro USB)
- Wax Guard
4. Product Structure and Components

- Earplug: Soft silicone tip that fits into the ear canal.
- Microphone Port: Collects sound from the environment.
- Pull Line: Small string to assist in removing the hearing aid from the ear.
- Power Switch: Toggles the device On/Off (Left and right dial switch).
- Volume Adjustment Knob: Controls the sound amplification level.
- Shell: Main body of the hearing aid.
- Earwax Guard: Protects the sound outlet from earwax buildup.
Three sizes of open domes (S, M, L) are available for selection to ensure comfort and eliminate occlusion effect.
5. Setup Instructions
5.1. Charging the Sound Amplifier

- Connect the Micro USB cable to a standard power adapter and the charging case.
- Place the Sound Amplifier(s) into the charging base.
- When inserted, the blue indicator light on the charging case will blink twice initially.
- The indicator lights will glow blue during charging and turn off when fully charged.
- If the Sound Amplifier is not correctly inserted, the indicator will not light up.
- Note: For the first use, it is recommended to charge for no less than 6 hours.
5.2. Replacing Earplugs
Proper earplug size is crucial for comfort and to prevent whistling.
Disassembly:
Pinch the earplug firmly with your hand to separate the silicone tube from the connector on the hearing aid.
Assembly:
- Select the appropriate size of earplug for your ear canal.
- Hold the earplug and firmly push it onto the connector until it is securely attached.
- Ensure the bottom of the earplug reaches the bottom of the connector. The earplug should not drop off when gently pulled.
Tips:
- It is recommended to start with a Medium (M) size earplug.
- If the earplug is too small, the Sound Amplifier may whistle when worn. Try a larger size.
- If the earplug is too big, it may not fit comfortably. Try a smaller size.
6. Operating Instructions
6.1. Power On/Off
- Power On: Flip the power switch to the 'ON' position.
- Power Off: Flip the power switch to the 'OFF' position.
6.2. Wearing the Sound Amplifier
- Hold your Sound Amplifier between your thumb and forefinger, with the pull wire pointing downwards.
- Gently push the Sound Amplifier into your ear canal using the tip of your forefinger until it feels comfortable.
- Use your other hand to pull the outer ear backwards and upwards to ease insertion.
- Move your forefinger up and down gently, and open/close your mouth several times to ensure the device is seated well and comfortable.
6.3. Removing the Sound Amplifier
- Pinch the pull wire with your thumb and forefinger.
- Gently pull the hearing aid out of your ear canal.
- It is recommended to remove the Sound Amplifier over a soft surface (e.g., a sofa or bed) to prevent damage if dropped.
6.4. Volume Control
The volume control for both left and right ear Sound Amplifiers operates similarly:
- Clockwise rotation: Increases the volume gradually.
- Counter-clockwise rotation: Decreases the volume gradually.
If the amplified sound is insufficient even at maximum volume, the device may need charging.
6.5. Adaptation Plan for New Users
Video 1: Product Overview and Adaptation Steps. This video highlights key features and includes a section on adapting to new hearing aids (0:46-0:57).
Adapting to a new Sound Amplifier takes time, as your brain needs to adjust to new sounds. The acclimatization period is typically 4 to 8 weeks.
- First Week: Use 1-2 hours per day in a quiet indoor environment to familiarize yourself with various sounds.
- Second Week: Use 3-4 hours per day. Try quiet outdoor places.
- Third Week: Use more time per day. Try public places.
- Fourth Week: Use all day. Try anywhere you want.
Advice from Ear Specialist: As a new user, you will hear many sounds you haven't heard for a long time, and it's normal to feel a little uncomfortable. It will take about 4 weeks to get used to them, and the noise will slowly become inaudible.
7. Maintenance
7.1. Cleaning the Sound Amplifier
- Clean your Sound Amplifier with a dry, soft cloth regularly.
- Use a small brush to clean any earwax from the sound hole.
- Always clean the device on a soft surface (e.g., a desk with a cloth) to prevent damage if dropped.
- Never use any liquid (e.g., water) to clean the device, as this can cause permanent damage to the circuitry.
7.2. Replacing the Wax Guard
Wax guards need to be replaced periodically. Please consult your fitting center for Sound Amplifier or follow the instructions provided with the Wax Guard package for replacement.
7.3. Vibration Prevention
When not in use, store the Sound Amplifier in its charging case to protect it from vibrations and accidental damage.
7.4. Moisture and Water Prevention
- To prevent moisture damage, place your Sound Amplifier in a dry box every night before sleep.
- Keep the Sound Amplifier away from water. Always remove it before swimming, showering, washing your head, or washing your face.
- If the Sound Amplifier accidentally falls into water, do not use it. Use a soft, clean cotton cloth to dry it and place it in a ventilated, dry environment. If issues persist, contact customer service.
7.5. High Temperature Prevention
Do not expose the Sound Amplifier to extreme temperatures or prolonged direct sunlight.
7.6. Dropping Prevention
Avoid dropping the Sound Amplifier or knocking it against hard surfaces.
7.7. Electromagnetic Compatibility (EMC)
According to IEC 60118-13, remove your Sound Amplifier before getting close to radio and telecommunication equipment to prevent potential damage to your hearing or the device.
8. Troubleshooting
If you encounter any issues, refer to the table below. If the problem persists, do not attempt to open or repair the device yourself; contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound | Volume turned off | Rotate volume knob clockwise |
| Low battery | Charge the Sound Amplifier | |
| Dirt blocks earplug/tube | Clean earwax or contact audiologist | |
| Small Voice | Low battery | Charge the Sound Amplifier |
| Not Clear | Hearing loss change | Consult the audiologist |
| Distortion | Sound Amplifier is damped | Dry it with a dry box or contact audiologist |
| Dirt blocks sound tube | Clean sound tube or contact audiologist | |
| Can't Adjust Volume | Volume at max/min level | Rotate volume knob in opposite direction |
| Dirt blocks sound tube/earplug | Clean or contact audiologist | |
| High Power Consumption | Device on when not in use | Place in charging case when not in use |
| Sound Amplifier is damped | Dry it with a dry box or contact audiologist | |
| Whistling | Not worn correctly | Correctly wear it again |
| Volume too loud | Turn down the volume | |
| Cracked Sound Amplifier | Contact audiologist | |
| Hands/objects too close | Move hands/objects away from ears | |
| Intermittent Sound | Low battery | Charge the Sound Amplifier |
9. Specifications
| Parameter | Value |
|---|---|
| Fitting Range | ≤70dB |
| MAX OSPL90 (dB SPL) | 108.7 |
| HFA OSPL90 (dB SPL) | 106.4 |
| Peak Gain (dB) | 30.0 |
| HFA FOG (dB) | 25.6 |
| Frequency Range | F1≤200Hz; F2≥6500Hz |
| THD at 500Hz | 2.3% |
| THD at 800Hz | 2.9% |
| THD at 1600Hz | 1.9% |
| Eq. Input Noise Level (dB) | 24.8 |
| Battery Current Drain (mA) | 1.2 |
| Attack Time (ms) | NA |
| Release Time (ms) | NA |
| Rated Voltage | DC1.2V |
| Normal Atmospheric Pressure | 86KPa ~ 106KPa |
| Operating Temperature | 0°C ~ +40°C |
| Operating Humidity | 0%RH ~ 80%RH |
| Storage Temperature | -20°C ~ +50°C |
| Storage Humidity | 0%RH ~ 93%RH |
| Package Length | 16 cm |
| Package Width | 10 cm |
| Package Height | 5 cm |
| Package Weight | 0.18 kg |
10. Contraindications
Do not use this Sound Amplifier if you have any of the following conditions:
- Visible congenital or traumatic deformity of the ear.
- History of active drainage from the ear within the previous 90 days.
- History of sudden or rapidly progressive hearing loss within the previous 90 days.
- Acute or chronic dizziness.
- Unilateral hearing loss of sudden or recent onset.
- Visible evidence of significant cerumen accumulation or a foreign body in the ear canal.
- Pain or discomfort in the ear.
11. Warranty and Support
11.1. Warranty Coverage
For all devices, failures caused by non-human factors will be covered by free warranty from the date of purchase. Please refer to your warranty card for the specific warranty period.
11.2. Non-Free Warranty Coverage
The warranty does not cover:
- Damage caused by incorrect use or improper operation.
- Damage from disassembly, assembly of parts, or other human-caused damage.
- Damage caused by irresistible reasons (e.g., floods, fires, earthquakes).
- Changes to the Sound Amplifier model or serial number on the warranty card without authorization.
- Absence of a valid warranty card.
11.3. Product Lifespan
The normal working period for this device is 5 years. Equipment must be stored and used as required. Its intended function may be affected after the specified usage time.
11.4. Support
If you have any questions or require assistance, please refer to the detailed user manual PDF available at Laiwen Hearing Aid User Manual (PDF) or contact customer service.
12. Symbol Information
The following symbols may appear on your device or packaging:
| Symbol | Description |
|---|---|
| 📖 | Symbol for "User Guide must be read" / "Consult instructions for use" |
| 🏭 | Symbol for "Manufacturer" |
| ⚠️ | Symbol for "Caution" |
| fragile | Symbol for "Fragile, handle with care" |
| ☔ | Symbol for "Keep dry" |
| 📅 | Symbol for "Date of manufacture" |
| SN | Symbol for "Serial number" |
| Σ | Symbol for "Use-by date" |
| ⛛ | Type B Applied Part |
| 🗑️ | This marking indicates that the product should not be disposed of with other household wastes at the end of its working life. Recycle responsibly. |
| IP22 | IP22: Protected against solid foreign objects ≥12.5mm and against vertically falling water drops when enclosure tilted up to 15°. |
| ♻️ | The harmful substances in the product meet the limited requirements. |