Introduction
This manual provides comprehensive instructions for the installation, operation, and troubleshooting of your Bonroad 8.8-inch Wireless CarPlay Android Auto Touch Screen. This unit is designed to integrate seamlessly with specific BMW 3 and 5 Series models equipped with the CCC (Car Communication Computer) system, enhancing your driving experience with modern infotainment features.
The Bonroad 8.8-inch display unit, integrated into a BMW dashboard, showcasing the Apple CarPlay interface with various app icons.
Important Compatibility Notice
Before proceeding with installation, it is crucial to verify your car's system type. This unit is exclusively compatible with BMW vehicles equipped with the CCC (Car Communication Computer) system. It is NOT compatible with CIC (Car Information Computer) systems.
This image shows examples of BMW CCC and CIC system interfaces. The Bonroad unit is compatible with the CCC system (indicated by a green checkmark) and incompatible with the CIC system (indicated by a red cross). Ensure your vehicle has a CCC system before installation.
Applicable Models & Years:
- For BMW 5 Series: E60, E61, E63, E64 (2005-2008) with CCC System
- For BMW 3 Series: E90, E91, E92, E93 (2005-2008) with CCC System
This image confirms the applicable BMW models and years that use the CCC system. It also displays the 10-pin LVDS plug for connecting the display.
AUX Output Requirement:
The device outputs sound through your car's original AUX output. If your original car system does not have an AUX output, you will need to activate the AUX function at a local car workshop or purchase an E60 AUX Activator additionally.
This image highlights a critical pre-installation step: if your BMW's original system does not have an AUX output, you must activate it at a local car workshop or purchase an E60 AUX Activator. The image shows the AUX interface on the car's display and an example of an E60 AUX Activator module.
Setup & Installation
Follow these steps for proper installation and initial setup of your Bonroad display unit for E60 CCC system cars:
-
Power Cable Check: When installing, first check your car's power cable. If it contains a green fiber optic cable, you need to carefully remove this cable from the original connector and transfer it to the new harness provided with your Bonroad unit. This ensures proper signal transmission.
-
LVDS Connector Connection: Ensure that the CCC LVDS connector from your car's original system is securely plugged into the corresponding port on the new Bonroad screen. This connection is vital for video display.
-
Initial System Configuration: After completing the physical installation, you need to configure the car's setup to properly integrate with the BMW system. Access the settings menu on the new unit by navigating to
Settings > System > factory (8866) > Car Setup. From there, select the option that corresponds to your vehicle's configuration.
Operating Instructions
Wireless CarPlay & Android Auto
The unit features built-in wireless CarPlay and Android Auto, eliminating the need for an extra adapter. You can use your phone's applications directly on the radio display.
This image details the steps for connecting Wireless CarPlay (iOS System) and Wireless Android Auto (Android System). Both require connecting via Bluetooth first, then selecting 'Wireless Carplay' or 'Wireless Auto' on the unit. USB cable connection is also an option.
For Wireless CarPlay (iOS System):
- Connect your iPhone to the unit via Bluetooth.
- On the unit, click "Wireless Carplay" or wait for it to switch automatically.
- Wait for the connection to establish.
For Wireless Android Auto (Android System):
- Connect your Android phone to the unit via Bluetooth.
- On the unit, click "Wireless Auto" or wait for it to switch automatically.
- Wait for the connection to establish.
Both systems can also be connected via a USB cable.
Navigation & Maps
Utilize your favorite navigation applications directly on the display, allowing you to focus on driving.
This image illustrates the navigation capabilities, where a route planned on a smartphone is displayed on the Bonroad unit, allowing the user to focus on driving.
Audio Output Settings
After entering the BMW menu, ensure the sound output is correctly set to AUX. This allows audio from the Bonroad unit to play through your car's speakers.
Display Area Adjustment
If your screen displays an incorrect aspect ratio or a red box, you can adjust the OEM display area. Navigate to Settings > System > factory (8866) > OEM Display Area and select the "Full" option for an optimized display.
Unit Measurement Settings
To switch between kilometers and miles for measurement units, go to Settings > System > factory (8866) > measure unit and choose your preferred unit.
Troubleshooting
Steering Wheel Button Functionality
If your steering wheel buttons are not functioning after configuring the BMW menu, try adjusting the E60 I-DRIVER setting. Go to Settings > System > factory (8866) > E60 I-DRIVER and test options A or B to determine which one resolves the issue.
Car Camera Display Issues
If your car camera is not displaying correctly, follow these steps based on your camera type:
-
Car with Radar Only: If your car is equipped only with a radar system, navigate to
Settings > Reverse > Radar Displayand activate the corresponding button to enable the display. -
Factory Camera: For original factory-installed cameras, access the camera settings, slide down through the available options, and select the input corresponding to your original camera.
-
Aftermarket Camera: If you have an aftermarket camera installed, select the
CVBS-NTSCoption within the camera settings to ensure proper video input.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | BONROAD |
| Display Size | 8.8” |
| Resolution | 1280*480 |
| Operating System | Linux |
| Chipset | T113 |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.5kg |
| Special Features | Built-In Speaker/Microphone, WiFi function, CarPlay, Android Auto, Reversing Input, Support steering wheel control |
| Digital Media Format | Mp3, MP4 |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese |
| For Vehicle Brands/Model | BMW (530i, 2004-2012) |
| Certification | CE, WEEE |
| Material | PC |
| Built-in Screen | Yes |
| Is touch screen | Yes |
| TF/Micro SD Slot | 0 |
| Din | One Din |
| Interface | ISO |
Maintenance
To ensure the longevity and optimal performance of your Bonroad display unit, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth to clean the screen. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
- Software Updates: Periodically check the manufacturer's website or contact support for any available software updates. Keeping your unit's software up-to-date can improve performance, add new features, and fix bugs.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Warranty & Support
This product comes with a 1-Year Warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For detailed warranty terms, technical support, or further assistance, please refer to the official user manual PDF or contact Bonroad customer service.
Additional Resources:
User Tips
Based on user experiences, here are some helpful tips for getting the most out of your Bonroad display unit:
- Initial Setup Patience: The initial configuration, especially for AUX activation and system integration, might require some patience. If you encounter difficulties, consulting a professional installer familiar with BMW systems is recommended.
- Bluetooth First: Always ensure your phone is properly paired via Bluetooth before attempting to connect to Wireless CarPlay or Android Auto. This is a common step for stable connections.
- Test All Functions: After installation and initial setup, thoroughly test all functions, including audio, navigation, steering wheel controls, and camera inputs, to ensure everything is working as expected.