Introduction
This manual provides comprehensive instructions for setting up, operating, and troubleshooting your Gosund WP3 Mini Smart Wifi Plug. Please read this manual carefully before use to ensure proper functionality and safety.

What's in the Box
- Smart Plug x1
- User Manual x1
- Binding Voice Assistants Guide x1
At a Glance
Familiarize yourself with the components of your Smart Plug:
- ON/OFF Button
- Indicator Light
- Flame Resistant Material

Setup Instructions
1. Wi-Fi Requirements
The Gosund WP3 Smart Plug only supports 2.4G Wi-Fi connections. Ensure your mobile phone and the device are connected to a 2.4G Wi-Fi network simultaneously during setup. 5G Wi-Fi is not supported.

2. Download the GHome App
The GHome App is required to control your Smart Plug. You can download it using one of the following methods:
- Option 1: Search for "GHome II" in the Apple App Store (for iOS 11+ devices) or Google Play Store (for Android 6.0+ devices).
- Option 2: Scan the QR code below to directly access the download page.

Note: Your phone must run iOS 11+ or Android 6.0+ for a smooth connection.
3. Pairing with the GHome App
Follow these steps to pair your Smart Plug with the GHome App:
- Open the GHome II App and create your GHome account.
- Turn on the plug and place it near your Wi-Fi router when pairing.
- Hold the ON/OFF button on the plug for 5 seconds. Release the button when the indicator light starts to blink slowly to enter network pairing mode.
- Connect your phone to your 2.4G Wi-Fi router.
- In the GHome App, click the "+" icon at the top right corner of the homepage to add a device.
Automatic Pairing (Recommended)
- The app will automatically discover the device.
- Tap on the discovered device, enter your 2.4G Wi-Fi network name and password, then tap "Next".
- Once the device is successfully added, tap "Done".

Manual Pairing (AP Mode)
If automatic discovery fails, or if Bluetooth networking does not discover the device:
- In the GHome App, go to "Add Manually" and select "WP3" under "Sockets".
- Confirm that the indicator light on the plug is blinking slowly, then tap "Confirm light flashes" in the app.
- Select your 2.4 GHz Wi-Fi Network and enter the password, then tap "Blink Slowly".
- Connect your phone to the device's hotspot, typically named "SmartLife-XXXX".
- Return to the GHome App interface. The app will automatically connect to the router, completing the configuration.

4. Device Placement Guidelines
For optimal performance, consider the following when placing your Smart Plug:
- Plug the device into a standard wall socket.
- Ensure the distance between the Smart Plug and your Wi-Fi router is less than 100ft (approximately 30 meters). If there are obstructions, the recommended distance should be less than 50ft (approximately 15 meters).
- Minimize obstructions (e.g., walls, windows) between the device and the router to maintain a strong signal.
Operating Instructions
Main Features
- Voice Control: Control your appliances using voice commands with compatible assistants like Alexa and Google Home.
- App Control: Manage your devices from anywhere using your smartphone with the GHome App.
- Schedule Timer: Set schedules for your appliances to turn on/off automatically.
- Family Sharing: Share control permissions with family members for a collaborative smart home experience.
- Mini Size: Compact design for convenient use.
- VO Fireproof Materials: Constructed with safety in mind.

Remote Control
You can control the switch of the Smart Plug from anywhere and at any time, as long as your smartphone has network access.

Timing, Countdown, and Scheduling
Set precise timers, countdowns, or recurring schedules for your connected devices. For example, you can set a countdown for humidifiers or microwaves, and the device will stop automatically, preventing continuous operation.

Electricity Statistics
The Smart Plug can monitor the amount of electric power consumed in real-time, allowing you to control and track your electricity usage.

Family Sharing Control
The main account has exclusive permissions to share control of the Smart Plug with other family members. This allows everyone in the family to enjoy the benefits of a smart home.

Maintenance
- Do not use aggressive detergents such as alcohol or other chemical solutions, as these could damage the casing or impair the functioning of the product.
- For cleaning, gently wipe the exterior with a soft, dry cloth.
Troubleshooting
Resetting the Device
To reset the Smart Plug to factory settings:
- Turn on the power to the plug.
- Hold the ON/OFF button for 5 seconds.
- Release the button when the indicator light starts blinking slowly. This indicates a successful reset.
If the socket is moved to a new network environment, you will need to restore factory settings and then reconnect to the new network.
Connection Issues (2.4G Wi-Fi)
If the Smart Plug WP3 fails to connect to a 2.4G frequency band network, try the following solutions:
- Check Router's 2.4G Band: Access your router's management interface to verify that the 2.4G Wi-Fi is activated. Some routers may disable it by default or only enable 5G.
- Verify Network Information: Confirm that the Smart Plug is connecting to the correct 2.4G Wi-Fi network (its name often includes "2.4G"). When entering the password, double-check for errors, especially those caused by special characters (e.g., mistyping "0" as a similar-looking symbol).
- Reduce Interference and Adjust Distance:
- Place the smart socket closer to the router.
- Avoid walls or metal obstacles between the plug and the router.
- Keep the plug away from interference sources like microwaves or Bluetooth devices.
- In your router settings, consider changing the 2.4G channel to less crowded ones, such as channels 1, 6, or 11.
- Check Device Restrictions: Log into your router's management interface to see if the smart socket is on a blacklist. Remove it if it is. Ensure settings like "only 5G devices allowed" are disabled.
- Restart and Retry: Reboot both your router and the smart socket, then repeat the network configuration steps. If the device still fails to connect, it may be faulty. Contact the manufacturer's after-sales service for inspection.
Specifications
| Performance Parameter | Parameter |
|---|---|
| Model Number | WP3 |
| Input Voltage | AC100-240V (120V 1 50/60Hz, 10A MAX) |
| Output Current | 10A selectable (1200W MAX resistive) |
| Wi-Fi Type | 2.4GHz 802.11 b/g/n |
| Frequency Range | 2400-2483.5 MHz |
| Wi-Fi MAX Transmitting Power (dbm) | <20dBm |
| Working Environment | <0.5W |
| Operating Humidity | <80% |
| Network Security Level | WAP/WAP2 |
| Operating Temperature | -20 - +50°C |
| Certification Standards | FCC / RHOS |
| System Support | Android / iOS |
| Net Weight | 0.07KG |
| Main Dimensions (Diameter x Thickness) | φ2.03 in x 1.20 in |
| Total Length (including Contact/Terminal) | 1.97 in |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| High-concerned chemical | None |
| Origin | Mainland China |
User Tips
No specific user tips are available from provided reviews or Q&A content.
Warnings and Precautions
Important!
- Keep the device out of the reach of children and pets.
- Do not use this product in humid environments or outdoors. It is designed for indoor use only.
- Do not place this product near heating devices, such as microwave ovens, stoves, or radiators.
- Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors, and solvents.
- Do not disassemble, modify, or repair your device. Seek help from authorized professionals for device malfunction.
- Do not use the device when it is no longer working properly or is visibly damaged.
- Do not insert your device into another one.
- Never use aggressive detergents such as alcohol or other chemical solutions, as these could damage the casing or impair the functioning of the product.
Note: The images shown in this manual are indicative only. If there is any inconsistency between an image and the actual product, the actual product shall govern.
Warranty and Support
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator and your body.
The Gosund WP3 Smart Plug is certified with FCC and RHOS standards.
Additional Resources
A PDF version of the user manual is available for download: User manual (PDF)
For further assistance or if your device is faulty, please contact the manufacturer's after-sales service.