1. Introduction
This manual provides comprehensive instructions for setting up, operating, and maintaining your Peocke WorldTag Anti-Loss Device. This intelligent mini GPS tag is designed to help you locate lost items, pets, or valuables using Apple's Find My network. It offers real-time positioning, a pet-friendly design, and a long battery life, all within a lightweight and portable form factor.
Figure 1: Peocke WorldTag Anti-Loss Device Overview
2. Safety Information
- This product is small; keep it away from children aged 6 and under to prevent accidental ingestion.
- The built-in battery is disposable and does not support charging. Do not attempt to charge the button cell battery.
- Use this product responsibly and in accordance with local laws. Do not use it for illegal purposes.
- Do not expose the product to fire or direct sunlight for extended periods. Avoid violent impact on the battery, as this may lead to dangerous consequences.
3. Product Features
- Precise Positioning: Track the location of the tag through your iPhone/iPad/Mac after binding.
- High-End Chip Remote Positioning: Offers remote positioning without distance limitations.
- Strong Signal: Maintains tracking signal even in areas with strong wireless interference or physical barriers.
- IPX5 Waterproof: Resistant to water splashes and light rain, suitable for worry-free use.
- Detachable Battery: Features a built-in, replaceable CR2032 button cell battery for continuous operation.
- Lightweight and Portable: Compact size (34.5mm x 34.5mm x 11mm) allows easy attachment to pets' collars, keychains, backpacks, wallets, handbags, or car storage boxes.
Figure 2: Key Features of the WorldTag
4. Setup Guide
4.1. Unboxing and Device Overview
Upon opening the package, ensure you have the WorldTag anti-loss device and any included accessories (e.g., rope). The device is a compact, square-shaped tag, typically available in black or white.
Figure 3: WorldTag Device
4.2. Battery Installation/Replacement
The WorldTag uses a replaceable CR2032 button cell battery. If the battery is low or needs replacement, carefully open the device casing (refer to the device's physical design for the opening mechanism, usually a small notch or twist-off cover) and insert a new CR2032 battery, ensuring correct polarity. The battery is disposable and cannot be recharged.
4.3. Pairing with Apple Find My App (iOS 14.5 and Above)
The WorldTag is designed to work exclusively with Apple's Find My network. Ensure your Apple device (iPhone, iPad, or Mac) is running iOS 14.5 or a later version.
- Activate the Device: Press the power button on the WorldTag once. You will hear a sound, indicating the device is on and has entered pairing mode.
- Open Find My App: On your Apple device, open the "Find My" application.
- Add Item: Navigate to the "Items" tab and tap "Add Item".
- Select Other Supported Item: Choose "Other Supported Item" from the options.
- Name the Device: Follow the on-screen prompts to name your WorldTag (e.g., "Keys," "Pet," "Backpack").
- Confirm Connection: The device will link to your Apple ID. Review the information and tap "Finish" or "Agree" to complete the pairing process.
If the connection is unsuccessful, refer to the Troubleshooting section or reset the device and attempt to connect again.
Figure 4: Connection Binding Steps
5. Operating Instructions
5.1. Locating Items with Find My
Once your WorldTag is paired, you can use the Apple Find My app to locate your items.
- View on Map: Open the Find My app. Your WorldTag will appear on the map, showing its current or last known location.
- Play Sound: If the item is nearby, select the WorldTag in the app and tap "Play Sound" to make the tag emit an audible alert, helping you pinpoint its exact location.
- Get Directions: The app can provide directions to the WorldTag's location.
Figure 5: Locating Items via Find My App
5.2. Lost Mode
If your item is lost, you can enable "Lost Mode" in the Find My app. This feature allows you to:
- Receive a notification when the item's location is found by another Apple device in the Find My network.
- Display a message and contact information to anyone who finds your item.
- Prevent others from pairing the WorldTag with their Apple ID.
Figure 6: Activating Lost Mode
5.3. Forgetting Reminder (Notify When Left Behind)
To prevent leaving your items behind, you can set up a "Notify When Left Behind" reminder in the Find My app.
- When enabled, your mobile phone will immediately receive a prompt message if you move a certain distance away from the connected WorldTag.
- You can customize locations where you do NOT want to be notified (e.g., your home or office).
Figure 7: Setting Up Forgetting Reminders
6. Maintenance
6.1. Cleaning
Wipe the WorldTag with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the device's surface or internal components.
6.2. Battery Care
The WorldTag uses a disposable CR2032 button cell battery. When the battery is depleted, replace it with a new one. Do not attempt to recharge the battery. Dispose of used batteries according to local regulations.
6.3. Water Resistance
The device is IPX5 waterproof, meaning it can resist a sustained low-pressure water jet spray. It is suitable for use in light rain or during vehicle washing. However, it is not designed for submersion in water. Avoid exposing it to high-pressure water jets or prolonged immersion.
Figure 8: IPX5 Water Resistance
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on or pair. | Low or depleted battery; device not in pairing mode; connection issue. |
|
| Cannot locate item on map. | Device out of range of Apple Find My network; battery depleted; app permissions. |
|
| "Play Sound" feature not working. | Device too far; battery low; internal malfunction. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | WorldTag anti-loss device |
| Item Size | 34.5mm x 34.5mm x 11mm (1.35inch x 1.35inch x 0.43inch) |
| Product Color | Black, White (Customizable) |
| Battery Type | CR2032 button cell (disposable) |
| Battery Capacity | 230mA |
| Battery Life | 30 Hours & Up (Standby time: Three months and above) |
| Out Power | 0.1mw |
| GPS Module | Yes |
| GPS Type | GPS Tracker |
| Special Features | Waterproof (IPX5) |
| Waterproof and Dustproof Rating | IPX5 |
| Wireless Charging | Support |
| Applicable System | Only iOS 14.5 and Above |
| Voltage | 3V |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
Figure 9: Product Dimensions
9. User Tips
- iOS Compatibility: This device is designed exclusively for Apple's Find My network and requires iOS 14.5 or above. It is not compatible with Android devices.
- Battery Life: While the battery life is rated for "30 Hours & Up" and "Three months and above" for standby, actual usage may vary. Consider carrying a spare CR2032 battery for quick replacement if needed.
- Global Positioning: The device leverages the vast Apple Find My network for global positioning. In densely populated areas with many Apple devices, location updates will be more frequent and accurate.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific warranty policy or contact the manufacturer directly. You may also find additional resources and support on the official product page or by referring to the User Manual (PDF) if available.