Erilles Professional Laser Safety Goggles

Contents

Professional Laser Safety Goggles User Manual

Model: Professional Laser Safety Goggles | Brand: Erilles

Introduction

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Erilles Professional Laser Safety Goggles. These goggles are designed to offer OD6+ high protection against UVR and infrared radiation, making them suitable for applications such as IPL hair removal and beauty equipment. Please read this manual thoroughly before using the product.

A detailed user manual is also available in PDF format: User Manual (PDF).

Warning & Safety Information

  • Children's Safety: This product is not suitable for children under 3 years old. Keep small parts (e.g., screws, nose pads) away from young children to prevent choking hazards. Do not swallow any small components of the glasses, as this may cause choking. Adults must supervise children if they wear the glasses, ensuring proper fit and correct wear.
  • Eye Contact: Avoid direct contact with eyes. If accidental contact occurs (e.g., with lens cleaning solution), rinse immediately with clean water and consult a doctor if discomfort persists.
  • Intended Use: These glasses are designed for vision correction (e.g., myopia, hyperopia, astigmatism) or reading assistance. They are not suitable for outdoor use in strong sunlight (use sunglasses or clip-on sunglasses for outdoor use).
  • Vision Correction Reminder: These glasses are customized according to your vision prescription (if applicable). Do not share your glasses with others, as this may cause eye strain, dizziness, or vision damage to the wearer.

Setup

I. Instructions for Use

  1. Initial Inspection: Before use, inspect the frame, lenses, and hinges for any damage (e.g., cracks, scratches, loose parts). If any damage is found, do not use the glasses, as it may affect vision or cause injury.
  2. Wearing and Adjustment: Wear the glasses steadily on your face. Adjust the temples to fit comfortably around your ears, and adjust the nose pads (if applicable) to ensure the lenses align with your pupils. This ensures optimal vision correction and comfort.
Transparent safety goggles
Figure 1: Transparent safety goggles, showing the general design.
Safety glasses with dimensions
Figure 2: Safety glasses with indicated dimensions for proper fit.

Operating Instructions

These safety goggles are designed for professional use, particularly in environments involving laser radiation, IPL hair removal, and beauty equipment. Ensure the goggles are properly fitted before commencing any activity that requires eye protection.

  • Laser Protection: The goggles provide OD6+ high protection against specific laser wavelengths (UVR and Infrared). Always verify that the goggles' protection level and wavelength range are appropriate for the specific laser or light source being used.
  • Continuous Wear: Wear the goggles continuously while in the presence of laser or intense light sources to ensure constant eye protection.
  • Reading Glasses (if applicable): If these are reading glasses, wear them only when reading or doing close-up work (e.g., using a computer, sewing). Remove them when looking at distant objects to avoid eye strain.
Person wearing safety glasses and hard hat in a work environment
Figure 3: Example of safety glasses in use for eye protection.

Care and Maintenance

Cleaning and Storage

  1. Regular Cleaning: After use, gently wipe the lenses with the provided soft microfiber cloth to remove dust, fingerprints, or oil. For stubborn stains, use a small amount of lens cleaning solution (avoid harsh chemicals) and wipe dry.
  2. Proper Storage: Store the glasses in the included protective case when not in use. Place the lenses facing upward to prevent scratches, and close the case securely to keep out dust and moisture.

Precautions

  • Avoid Physical Damage: Avoid dropping the glasses or applying excessive pressure to the frame or lenses, as this may cause lens breakage, frame deformation, or hinge damage. Optical lenses are particularly fragile and may shatter upon impact.
  • Cleaning Materials: Do not wipe the lenses with abrasive cloths (e.g., paper towels, rough fabrics), as this will scratch the lens surface, affect visual clarity, and reduce the service life of the lenses.
  • Temperature Exposure: Keep the glasses away from high temperatures and extreme heat (e.g., inside a hot car, near a heater). High temperatures can cause the frame to deform, the lens coating to peel off, or the lenses to crack.
  • Lens Care: Do not touch the lens surface with your fingers, as grease, dirt, or oils from your skin can leave smudges and affect vision. Clean the lenses with a soft, clean cloth specially designed for glasses; avoid using household cleaners or alcohol, as they can damage the lens coating.
  • Water Exposure: Avoid exposing the glasses to water for a long time (e.g., soaking in water, wearing them while washing your face). Moisture can damage the frame's finish, corrode hinges, or cause the lens coating to peel.
  • Disassembly: Do not disassemble or modify the glasses by yourself (e.g., adjusting hinges, replacing lenses). Improper disassembly may cause permanent damage, and non-prescription lenses cannot replace prescription lenses for vision correction.

Troubleshooting (FAQ)

Q: The lenses are blurry. What should I do?
A: Wipe the lenses gently with the provided soft cloth. If the blur persists, check for smudges or scratches. For prescription glasses, if the blur is not caused by dirt, it may be due to an incorrect prescription; consult your optometrist.
Q: The temples are loose or tight. How to adjust?
A: Tighten or loosen the hinge screws with a small screwdriver (if provided). For tight temples, gently bend them outward slightly; for loose temples, bend them inward – be careful not to over-bend to avoid frame damage.
Q: The nose pads are uncomfortable or slipping. What can I do?
A: Adjust the angle of the nose pads to fit your nose bridge. If the nose pads are worn or damaged, replace them with new ones (available at optical stores).
Q: Can I use my reading glasses for driving or watching TV?
A: No. Reading glasses are designed for close-up vision. Using them for distant vision (e.g., driving, watching TV) will cause eye strain, dizziness, and blurred vision.
Q: How often should I replace my glasses?
A: For prescription glasses, replace them every 1-2 years (or when your prescription changes). For reading glasses, replace them when the lenses are scratched, cloudy, or when they no longer provide clear vision.

Specifications

Feature Detail
Brand Name Erilles
Product Type Riding sunglasses, Basic Eyewear
Professional Type Basic Eyewear
Element Type Basic Classic
Applicable Scenarios Casual
High-concerned chemical None
Origin Mainland China
Package Length 18 cm
Package Width 8 cm
Package Height 8 cm
Package Weight 0.2 kg
Variety of safety glasses in different colors and styles
Figure 4: Different color options for the safety goggles.

User Tips

  • Always keep a soft microfiber cloth handy for quick lens cleaning to maintain clear vision.
  • Store your goggles in their protective case immediately after use to prevent scratches and dust accumulation.
  • Regularly check the tightness of the temple hinges and adjust them as needed with a small screwdriver to ensure a secure and comfortable fit.
  • If using for laser protection, double-check the laser's wavelength and power against the goggles' specifications to ensure adequate protection.

Warranty and Support

For any questions, concerns, or support regarding your Erilles Professional Laser Safety Goggles, please contact the seller or manufacturer directly. Keep your purchase receipt for any warranty claims.

Regular inspection of your eyewear is recommended. For prescription glasses, have your vision checked every 6-12 months and replace glasses if your prescription changes or lenses are severely damaged.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.