1. Introduction
Thank you for purchasing the Nanlite FS-300B Bi-color COB Video Light. This professional lighting solution is designed for photography, live streaming, and content creation, offering stunning optical performance and versatile control options. This manual will guide you through the product's features, setup, operation, and maintenance to ensure optimal performance and longevity.
Figure 1: Nanlite FS-300B Bi-color COB Video Light and included accessories.
2. Important Safety Instructions
- Before using the light fixture, please remove the COB protective cover.
- Do not look directly at the light when it is turned on.
- After adjusting the light, please wait 10 seconds before turning off the light fixture.
- Do not place any objects on the light fixture or allow liquid to flow into it.
- Avoid placing the light fixture near flammable or volatile solvents such as alcohol or gasoline.
- When cleaning the light fixture, use a soft cloth with a neutral cleaning agent to wipe off dirt. Do not use harsh cleaning agents.
- The light fixture should be installed in a dry and well-ventilated area. Avoid using it in humid, dusty, or excessively hot environments. Always check that the fan and ventilation holes are clear.
- Do not attempt to open or repair the light fixture yourself. Qualified professional personnel should perform repairs strictly following the procedures and conditions outlined in this manual.
- During use, do not block the ventilation holes to avoid affecting heat dissipation, which could damage the equipment. The surface temperature of the light fixture can be high during prolonged use; please be careful to avoid burns.
- Upon receiving the light fixture, please unpack and check for any damage caused by transportation. If there is any transportation damage, do not use the light fixture and contact your dealer or manufacturer immediately.
- Do not use power cords with damaged insulation. Do not pull or drag the power cord forcefully.
- Before installation, ensure that the power supply voltage used matches the voltage indicated on the light fixture's label.
- Turn off the power when the light fixture is not in use or when cleaning.
- Keep this equipment out of reach of children.
3. Package Contents
Please check the package to ensure all items are present:
- FS-300B Light Fixture x1
- 4.5m Power Cable x1
- Reflector x1
- COB Protective Cap x1
- User Manual x1 (PDF available for download: Download PDF Manual)
Figure 2: All items included in the FS-300B package.
4. Product Overview
The Nanlite FS-300B features a robust design with intuitive controls. Below is a diagram identifying its main components:
Figure 3: Product Structure Diagram.
Component Descriptions:
- Lock buckle: Used for attaching/detaching the reflector and other Bowens mount accessories.
- Umbrella hole: For mounting softbox umbrellas.
- Reflector: Concentrates light for increased illumination.
- Angle adjustment knob: Secures the light fixture's tilt angle.
- Display screen: Shows operational data and settings.
- Light body handle: For easy carrying and adjusting the light's position.
- USB port: For firmware upgrades.
- Right knob: Selects functions and adjusts color temperature in CCT mode.
- MODE button: Toggles between CCT mode, special effects mode, and menu.
- Power switch: Turns the light fixture on/off.
- Fuse holder: Contains the protective fuse.
- Left knob: Adjusts brightness and navigates menu options.
- Power input: AC power connection port.
- U-shaped bracket: Connects the light to a stand and allows for angle adjustment.
- Bracket knob: Secures the light fixture to a stand and adjusts its horizontal position.
5. Setup
5.1. Attaching the Reflector
- Align the reflector's Bowens mount with the light fixture's mount.
- Rotate the reflector clockwise until it locks securely onto the light body.
- To remove, press the lock buckle down and rotate the reflector counter-clockwise.
5.2. Installing a Softbox Umbrella
- Loosen the angle adjustment knob.
- Insert the umbrella shaft into the umbrella hole on the light fixture.
- Tighten the angle adjustment knob to secure the umbrella.
Video 1: Product demonstration showing setup, features, and usage scenarios.
6. Operating Instructions
6.1. Power On/Off
Ensure the power cable is securely connected to the light fixture's power input (13) and a compatible AC power source. Flip the power switch (10) to turn the light on or off. The display screen (5) will show relevant parameters upon startup.
6.2. CCT Mode (Color Temperature Mode)
Press the MODE button (9) to switch to CCT mode. In this mode:
- Rotate the Left Knob (12) to adjust brightness (0-100%).
- Rotate the Right Knob (8) to adjust the color temperature (2700K-6500K).
Figure 4: Adjusting CCT and brightness on the control panel.
6.3. Special Effects Mode
Press the MODE button (9) to cycle through to the special effects mode. The FS-300B includes 12 built-in practical effects:
- CCT Loop: Cycles through color temperatures.
- INT Loop: Cycles through brightness levels.
- Flash: Creates a flashing light effect.
- Pulse: Generates a pulsating light.
- Storm: Simulates lightning.
- TV: Mimics the flickering of a television screen.
- Paparazzi: Simulates camera flashes.
- Candle/Fire: Replicates the warm flicker of a candle or fire.
- Bad Bulb: Simulates a malfunctioning light bulb.
- Fireworks: Creates a fireworks display effect.
- Explosion: Simulates an explosion flash.
- Welding: Mimics welding sparks.
For each effect, use the Left Knob (12) and Right Knob (8) to adjust parameters such as brightness, color temperature, speed, interval, or afterglow as applicable. Refer to the PDF manual for detailed instructions on each effect.
Figure 5: The 12 Customizable Practical Effects.
6.4. Fan Control
The fan can be controlled via the menu. Navigate to the fan settings using the MODE button (9) and knobs. You can choose to turn the fan on or off.
- Fan On: Allows full power output.
- Fan Off: Limits maximum output to 25% for the FS-300B (15% for FS-150B/200B) to prevent overheating.
6.5. Remote Control Options
The FS-300B supports on-board control, remote control, and NANLINK APP control thanks to its built-in Bluetooth and 2.4G module. This allows you to adjust various settings including DIM, CCT, and special effects remotely. With the NANLINK app, professional group control is also possible.
Note: Remote controls and the NANLINK APP require separate purchases or downloads.
Figure 6: Controlling the FS-300B via the NANLINK APP.
6.6. Function Lock
Long press the Right Knob (8) to lock the current function settings. This prevents accidental changes during operation. Long press again to unlock.
7. Specifications
Here are the technical specifications for the Nanlite FS-300B, along with other models in the series for comparison:
| Feature | FS-150B | FS-200B | FS-300B |
|---|---|---|---|
| Rated Power | 175W | 220W | 350W |
| Input Voltage | AC220-240V 50/60Hz | AC220-240V 50/60Hz | AC220-240V 50/60Hz |
| Color Temperature | 2700K-6500K | 2700K-6500K | 2700K-6500K |
| CRI (Average) | 96 | 96 | 96 |
| TLCI (Average) | 97 | 97 | 97 |
| Voltage Range | High voltage (50-1000V DC, 75-1000V AC) | ||
| Battery Included | No | ||
| Power Source | Other (AC Power) | ||
| Inbox Adaptor | Yes | ||
| High-concerned chemical | None | ||
| Lighting Type | Photographic Strobe Lighting | ||
| Color Temperature Version | Bi-color Version | ||
| Package | Yes | ||
| Origin | Mainland China | ||
8. Troubleshooting
If you encounter any issues with your Nanlite FS-300B, please refer to the table below for common problems and solutions. If the problem persists, contact customer support.
| Problem | Analysis and Solution |
|---|---|
| Light fixture does not start normally |
|
| Light is fully on, but display is off and cannot be dimmed |
|
| Display is on, but no light output |
|
| Light fixture flickers |
|
| Internal fan does not rotate |
|
Note: The above issues may not always indicate a malfunction. Please re-check the light fixture and rule out the above phenomena before contacting for repair. This manual is based on strict testing of our company's products. Product design changes may occur without prior notice.
9. User Tips
- For optimal color accuracy, ensure the light is set to the appropriate color temperature for your shooting environment.
- When using softboxes or umbrellas, remember to adjust the light's intensity to compensate for light loss.
- Utilize the NANLINK app for convenient remote control, especially when the light is placed in hard-to-reach positions or for managing multiple lights.
- Experiment with the various special effects to add creative flair to your videos and photos.
- Always allow the light to cool down after intensive use, especially if the fan was turned off or operating at reduced capacity.
10. Warranty and Support
For detailed warranty information, service, and support, please refer to the official Nanlite documentation or contact your point of purchase. You can also find additional resources and the full user manual in PDF format via the link provided in the Package Contents section.