1. Introduction
The JONSBO BO400 is a high-performance ATX computer case designed for enthusiasts seeking a blend of aesthetic appeal and robust functionality. Featuring an aluminum frame and tempered glass panels, it offers a unique three-sided perspective view of your internal components. This manual provides detailed instructions for assembly, installation, and maintenance to ensure optimal performance and longevity of your computer case.

2. Setup and Installation
The BO400 case is designed for ease of installation with tool-less access for many components. Please follow these steps for a smooth build process.
2.1. Unpacking and Initial Inspection
Carefully remove the case from its packaging. Inspect for any damage that may have occurred during transit. Ensure all accessories are present, including the graphics card holder kit, replaceable glass cover, screw box, and user guide.

2.2. Accessing the Interior
The top cover, side panels, and bottom plate can be opened and closed without tools, improving the convenience of installation and maintenance.

2.3. Motherboard Installation
The BO400 is compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including those with a back-connect design. Install your motherboard into the designated standoffs.

2.4. Drive Installation
The back compartment of the BO400 features two independent hard disk compartments. It supports up to two 2.5-inch SSDs and up to four 3.5-inch HDDs. Note that the SSD and HDD bits are shared.


2.5. GPU Installation
The case supports high-performance GPUs up to 435mm in length. Utilize the standard high-strength aluminum alloy graphics card support frame to prevent sagging. The graphics card is cooled directly by the bottom fan, ensuring efficient heat circulation.

2.6. Power Supply Unit (PSU) Installation
The case accommodates ATX PS2 PSUs with a clearance of up to 200mm. The power supply is mounted at the top.
2.7. Cooling System Installation (Fans & Radiators)
The BO400 offers extensive cooling options, supporting up to three 360mm radiators. The fan support features a universal installation mode, allowing for flexible configuration.
- Top: Supports 3x120mm or 2x140mm fans, or 240mm/280mm/360mm radiators.
- Rear: Supports 1x120mm fan.
- Bottom: Supports 3x120mm or 2x140mm fans, or 240mm/280mm/360mm radiators.
- Side: Supports 3x120mm fans, or 360mm radiators.
The fan bracket can be adjusted to switch mounting height, allowing full display of the side visual light effect of the fan.



2.8. Cable Management
The case includes a motherboard cabling cover to block standard ATX motherboard cables, providing a clean installation experience. The rear I/O outlet can be routed using Velcro for bunching, further contributing to a tidy build.


3. Operating the Case
Once all components are installed and connected, you can power on your system. The front I/O panel provides convenient access to essential ports.
3.1. Front Panel Ports
- USB 3.2 Gen 1 Type-A: 2 ports
- USB 3.2 Gen 2 Type-C: 1 port
- Audio: 1 port (combined headphone & microphone)

3.2. Three-Sided View Mode
The default metal top cover can be replaced with the included glass top cover to achieve a three-sided perspective effect (top, front, and side). This mode is ideal for showcasing your build.

4. Maintenance
Regular maintenance helps keep your computer case clean and ensures optimal airflow and component longevity.
4.1. Cleaning
- Exterior: Use a soft, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners.
- Interior: Periodically use compressed air to remove dust from fans, radiators, and other components.
- Dust Filters: The case is equipped with dust filters (mounted at the top). Regularly remove and clean these filters to maintain good airflow and prevent dust buildup inside the case.
5. Troubleshooting
If you encounter issues with your computer build, consider these common troubleshooting steps:
- No Power: Double-check all power connections, including the 24-pin ATX connector, CPU power, GPU power, and front panel power switch headers. Ensure the PSU switch is in the 'ON' position.
- Fans Not Spinning: Verify that all fan headers are correctly connected to the motherboard or fan controller. Check fan settings in your motherboard's BIOS/UEFI.
- No Display: Ensure your monitor is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics). Reseat the GPU and RAM modules.
- Component Overheating: Confirm that all fans are spinning in the correct direction for optimal airflow. Ensure CPU cooler and GPU cooler are properly seated and making good contact. Check for dust buildup in radiators and filters.
- Loose Cables: Re-check all internal connections, especially power and data cables for storage drives.
6. Specifications
Below are the detailed specifications for the JONSBO BO400 ATX Computer Case:

| Feature | Specification |
|---|---|
| Model Number | BO400 |
| Chassis Type | Desktops |
| Form Factor | ATX |
| Case Size (D*W*H) | 474mm * 311mm * 489mm |
| Case Weight (Net/Gross) | 12.9kg / 18.3kg |
| Material | Aluminum alloy, Tempered glass, others |
| Motherboard Support | Mini-ITX / Micro-ATX / ATX (Compatible with Rear-Plug Type Motherboards) |
| Internal 2.5" Drive Bays | 5 (shared with 3.5" bays) |
| Internal 3.5" Drive Bays | 4 (shared with 2.5" bays) |
| Front Ports | USB3.2 Gen1 Type-A*2 / USB3.2 Gen 2 Type-C*1 / AUDIO*1 & MIC*1 |
| 120mm Fan Options | 10 (Top: 3, Rear: 1, Bottom: 3, Side: 3) |
| 140mm Fan Options | 4 (Top: 2, Bottom: 2) |
| Radiator Size Support | Top: 240/280/360mm; Side: 360mm; Bottom: 240/280/360mm |
| Max GPU Length | 435mm |
| Max CPU Cooler Height | 173mm |
| Max PSU Length | 200mm |
| With Side Panel Window | Yes |
| RGB Support | NO RGB (Panel indicator can be connected to ARGB control) |
| Dust Filters | TOP |
7. User Tips
- Optimize Airflow: Experiment with fan configurations (intake/exhaust) to find the best balance for your components. The flexible fan mounting options allow for various setups.
- Cable Management: Utilize the motherboard cabling cover and rear Velcro straps to keep cables tidy. This not only improves aesthetics but also enhances airflow.
- Showcase Your Build: Take advantage of the three-sided view mode by installing the glass top cover to proudly display your internal components and RGB lighting.
- Regular Cleaning: Make it a habit to clean the dust filters and interior components regularly to maintain optimal performance and prevent overheating.
8. Warranty and Support
The JONSBO BO400 ATX Computer Case typically comes with a 1-year warranty. For detailed warranty terms, technical support, or further assistance, please refer to the official user manual PDF or contact the seller directly.
You can view the comprehensive user manual in PDF format here: JONSBO BO400 User Manual (PDF).