1. Introduction
This manual provides general principles and guidelines for the safe installation, operation, and maintenance of your KEMIMOTO ATV Passenger Seat Kit. For specific steps, diagrams, and detailed instructions, it is highly recommended to refer to the official User Manual (PDF).
Important Note: This product is an aftermarket modification part intended to replace or decorate original vehicle components. Modifications may affect the vehicle's appearance, performance, and even safety. The buyer bears ultimate responsibility to ensure that the installation and use of this product comply with all applicable local laws and regulations regarding vehicle modifications, road safety, and vehicle certification in their country or region.
For a comprehensive guide including detailed diagrams and specific steps, please refer to the official User Manual (PDF) available at: User Manual (PDF).
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Professional Installation & Inspection: The installation of this product is strongly recommended to be performed by a professional UTV technician.
- Material & Compatibility: Before installation, confirm that the dimensions, specifications, and mounting holes of this product are a perfect match for your UTV's brand, model, and year.
- Warning: Keep the product and its components out of reach of children.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | KEMITOUR |
| For ATV Brand/Model | Can-Am |
| Compatible with | Can-Am G2 G2L models (Outlander L MAX 450, 500, 570; Outlander 500, 570, 650, 800) |
| Special Features | Backrest |
| Material | Plastic |
| Condition | 100% Brand New |
| Color | Black |
| Placement on Vehicle | Rear |
| Item Weight | 10.6 kg |
| Item Height | 55 cm |
| Item Width | 55 cm |
| Item Length | 71 cm |
| Origin | Mainland China |
| Package Weight | 11.0 kg |
| Package Dimensions (L x W x H) | 75 cm x 60 cm x 60 cm |
Dimensions Diagram
This diagram illustrates the key dimensions of the passenger seat kit, including a backrest height of 33cm (12.99inch), a backrest width of 38cm (14.96inch), handgrip length of 27cm (10.63inch), overall width of 44cm (17.32inch), and seat width of 47.5cm (18.7inch).
4. Installation
The following provides general principles for installation. Always refer to your UTV's Service Manual for specific instructions and safety precautions.
4.1 Pre-Installation Preparation
- Secure Parking: Park the UTV on a flat, stable surface. Turn off the engine and ensure it is securely supported by the main stand or a paddock stand.
- Tool Preparation: Use tools of the appropriate specification and good quality (e.g., torque wrench, hex keys). Do not use worn or damaged tools.
- Clean Contact Surfaces: Thoroughly clean the original mounting area on the UTV and the contact surface on the back of this product to ensure they are free of oil, grease, rust, or old adhesive residue.
4.2 General Installation Steps
- Trial Fit & Alignment: Before final tightening, place the product in the installation position to confirm that all holes align and that there is no contact with surrounding components.
- Post-Installation Check: After installation, check by hand to ensure the part is secure and does not wobble. Slowly and carefully operate the relevant vehicle mechanisms (e.g., turning the handlebars, applying the brakes, moving the suspension up/down) while visually observing to ensure there is no interference or friction at any point in the range of motion.
4.3 Visual Aid for Installation
Image showing the KEMIMOTO ATV Passenger Seat Kit, black, installed on the rear of an ATV, highlighting the backrest and integrated handgrips.
Side view of the KEMIMOTO ATV Passenger Seat Kit installed on an ATV, emphasizing the contoured seat and backrest for passenger comfort.
5. Operation
Once properly installed, the KEMIMOTO ATV Passenger Seat Kit provides a comfortable and secure seating option for a passenger. Ensure the passenger uses the integrated handgrips for stability during operation of the ATV. Always adhere to the ATV manufacturer's guidelines for passenger weight limits and safe riding practices.
6. Maintenance
6.1 Periodic Maintenance
- It is recommended to perform an inspection every 500 km traveled or monthly to confirm that all fasteners are secure and not loose.
- Clean the product surface with a soft, damp cloth. Avoid using strong acids, alkalis, or abrasive cleaners to prevent damage to the surface coating.
7. Troubleshooting
- Seat is not secure or wobbles: Re-check all fasteners and ensure they are tightened correctly according to the UTV's service manual specifications. Verify that the mounting points are clean and free of debris.
- Interference with vehicle mechanisms: If the seat interferes with handlebars, brakes, or suspension movement, re-evaluate the seat's alignment and adjust its position as necessary. Ensure there is adequate clearance for all moving parts.
8. User Tips
- Check all fittings: Before beginning installation, ensure all necessary seat fittings and mounting hardware are present and accounted for. Refer to the parts list in the full PDF manual if available.
- Regular inspection: Beyond the recommended maintenance, a quick visual check before each ride can help identify any loose fasteners or potential issues early.
9. Disposal
Dispose of this product and its packaging in accordance with local regulations for metal and plastic waste recycling. Recycling is encouraged to minimize environmental impact.
10. Warranty & Support
This product comes with a warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or contact KEMIMOTO customer support.
For technical support or inquiries, please contact your retailer or the manufacturer directly. Contact information for the manufacturer is: Guangzhou Qixi Information Technology Co., Ltd.