Malcayang 51437147538

Contents

OBDII Diagnostic Plug Cover User Manual

Model: 51437147538

1. Introduction

This manual provides essential information for the installation, use, and maintenance of your Malcayang OBDII Diagnostic Plug Cover, designed for BMW 3 Series E90, E91, E92, E93 LCI Left Hand Drive (LHD) vehicles. This product serves as a direct replacement for your vehicle's original OBDII port trim cover, enhancing the interior aesthetics.

2. Safety & Warnings

Important Safety Information

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Setup and Installation

This OBDII plug cover is designed for a direct fit and easy replacement. Professional installation is highly recommended, though the process is straightforward for experienced users.

Installation Steps:

  1. Locate the existing OBDII diagnostic plug cover in your vehicle (typically on the driver's side, lower dashboard area near the door hinge).
  2. Carefully remove the old or broken cover. This usually involves gently prying it out or unclipping it.
  3. Align the new Malcayang OBDII Diagnostic Plug Cover with the opening.
  4. Press the new cover firmly into place until it clicks securely. Ensure all clips are engaged.

Black and Beige OBDII covers with installation context
Figure 1: OBDII Plug Covers and their typical installation location.

Underside view of the black OBDII cover showing mounting clips
Figure 2: Underside view of the cover showing mounting clips (Black variant).

4. Operating Instructions

This product is a decorative and protective cover for your vehicle's OBDII diagnostic port. It does not have any operational functions beyond covering the port. Ensure it is securely fitted to prevent it from dislodging.

5. Maintenance

The OBDII plug cover is made from durable ABS plastic and requires minimal maintenance.

  • Cleaning: Wipe the cover with a soft, damp cloth to remove dust or dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
  • Inspection: Periodically check that the cover remains securely in place.

6. Troubleshooting

  • Cover does not fit: Double-check that you have the correct model for your BMW 3 Series (E90, E91, E92, E93 LCI) and that your vehicle is Left Hand Drive (LHD). Ensure no obstructions are preventing proper seating.
  • Cover feels loose: Remove the cover and re-install, ensuring all clips align and engage properly. If it continues to be loose, inspect the clips on the cover and the receiving slots in the vehicle for any damage.

7. Specifications

FeatureDetail
Brand NameMalcayang
MaterialABS
OEM NO.51437147538
Manufacturer Part Number51437147538 For BMW E90 E91 E92 E93 3 Series
Interchange Part NumberOBDII Plug Trim Cover For BMW E90 E91 E92 E93 3 Series
Other Part NumberPlug Cover for BMW E90 E91 E92 E93 3 Series LHD
Placement on VehicleFRONT
Special FeaturesOBDII Plug Trim Cover
Item Length12 cm
Item Width7 cm
Item Height5 cm
Item Weight0.07 kg
Country/Region of ManufactureChina
OriginMainland China
Available ColorsBlack, Beige
CompatibilityBMW 3 Series E90 E91 E92 E93 LCI (Left Hand Drive)

Top view of the black OBDII cover
Figure 3: Top view of the Black OBDII Plug Cover.

Top view of the beige OBDII cover
Figure 4: Top view of the Beige OBDII Plug Cover.

8. User Tips

  • Vehicle Compatibility: This cover is specifically designed for Left Hand Drive (LHD) BMW 3 Series E90, E91, E92, E93 LCI models. It may not fit Right Hand Drive (RHD) vehicles correctly, or the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.