ZTree Walnut Wood Sensor Night Light

Contents

ZTree Walnut Wood Sensor Night Light User Manual

Creative Intelligent Auto PIR Motion Sensor LED Rechargeable Magnetic Night Light

1. Product Overview

The ZTree Walnut Wood Sensor Night Light is a versatile, motion-activated LED light designed for various applications such as wardrobes, hallways, reading areas, and as a bedside lamp. It features a sleek design with a walnut wood finish, magnetic attachment for easy installation, and a rechargeable battery.

ZTree Walnut Wood Sensor Night Light in a staircase setting

Image 1: Product overview showing multiple lights on a staircase and key features like motion sensing, portable installation, and soft light.

2. Safety Instructions

  • Do not use this product in humid environments (such as bathrooms), as contact with water may cause malfunction or damage.
  • Do not strike or drop this product, as severe vibrations may damage internal components.
  • Do not disassemble or attempt to repair this product by yourself.
  • Do not throw the product into fire, as the internal battery may explode and pose a hazard.
  • Do not allow children under 7 years old to use this product unsupervised.

3. Setup and Installation

3.1 Charging the Device

Before first use, fully charge the night light using the provided Type-C USB cable. The charging port is located at the end of the light stick.

Close-up of the light's base showing the Type-C charging port and power switch

Image 2: Close-up of the light's base showing the Type-C charging port, power switch with "ON", "OFF", and "AUTO" modes, and visual representation of constant lighting, brightness off, and auto-sensor mode.

3.2 Mounting the Light

The ZTree Night Light features a simple, detachable magnetic design for easy installation.

  1. Prepare the Surface: Ensure the desired mounting surface is clean and dry.
  2. Attach the Magnetic Base: The light comes with a round magnetic base. You can either attach this base directly to a compatible metal surface or use the included double-sided foam tape strong pad to adhere it to any flat surface.
  3. Align the Magnetic Area: Position the magnetic ring on the back of the light stick close to the mounted magnetic base. It will attach automatically with secure contact. A soft

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.