1. Product Overview
The VTOMAN FlashSpeed1500 Extra Battery is designed to expand the capacity of your VTOMAN FlashSpeed1000 or FlashSpeed1500 Power Station, providing extended power for your needs.
Figure 1: Product Overview
The VTOMAN FlashSpeed1500 Extra Battery features a 1548Wh battery capacity and is designed to work with 1500W rated power systems.
Product Components
Figure 2: Packing List
The package includes the FlashSpeed 1500 Extra Battery, one CP3500 connection cable, and this User Manual.
Battery Features
Figure 3: Battery Features
The extra battery features a battery status display, a power on/off switch, and a CP3500 connection port for linking to the main power station.
2. Setup and Connection
Follow these steps to properly connect your extra battery to the main power station.
Connecting the Extra Battery
- Locate the CP3500 connection cable provided in the package.
- Connect one end of the CP3500 cable to the CP3500 port on the extra battery.
- Connect the other end of the CP3500 cable to the designated extra battery charging port on your VTOMAN FlashSpeed1000 or FlashSpeed1500 Power Station.
Figure 4: Connection to FlashSpeed1000
The extra battery seamlessly integrates with the FlashSpeed1000 power station.
Figure 5: Connection to FlashSpeed1500
When connected to the FlashSpeed1500, the total capacity can reach 3096Wh (1548Wh from main + 1548Wh from extra battery).
3. Operating Instructions
Power Output Priority
- When no charger is plugged in, the extra battery has output priority.
- Once the extra battery's power is exhausted, the system will automatically switch to the main battery to continue output without interruption.
Charging and Discharging Simultaneously
- If both charging and discharging occur simultaneously, and the main battery is not full, the main battery will be charged and discharged first.
- Once the main battery is fully charged, the system will automatically switch to the extra battery for charging and discharging.
Power Display
- During Charging: The main battery's display shows its remaining power. The extra battery's display shows its own remaining power.
- During Discharging: The main battery's display shows the combined power of the main and extra batteries. The extra battery's display shows its own power level.
Charging the System
Figure 6: Charging the Power Station with Extra Battery
The FlashSpeed 1500 power station, when connected to the extra battery, can be charged up to 100% in approximately 2 hours.
Important Note: When the main and extra battery are operating, do not directly disconnect the CP3500 cable. This may cause an interruption in the current output.
4. Maintenance and Safety Precautions
General Maintenance
- If not in use for a long period, charge the battery every 12 months to prevent power depletion.
- Keep the product dry. Do not place it in water or damp environments to avoid electric shock and damage.
- Ensure the product is kept under well-ventilated conditions during use and storage.
- Dispose of lithium battery products according to local laws and regulations at the end of their product life.
Safety Precautions
- Keep away from children to reduce potential risks.
- Do not use other electronic products that exceed the battery specifications to avoid electric shock and product damage.
- Do not use damaged output cables or plug-in terminals.
- Do not insert foreign objects into the input and output ports.
- Prevent the product from falling from a height.
- Avoid using the product in environments with excessively high or low temperatures, as this can cause functional failure, shorten lifespan, or damage.
- Do not expose the product to fire or temperatures exceeding 140°F (60°C), as this may cause fire, explosion, or other safety incidents.
- Do not expose the battery to rain, snow, frost, grease, or other harsh environments, which can cause failure, shorten lifespan, or damage.
- Do not attempt to disassemble the battery or allow non-professional technical personnel to do so, as this may lead to unknown risks such as electric shock, fire, or explosion.
- In case of battery leakage under extreme conditions, if skin or other body parts come into contact, wash immediately with soap and water. If it gets into eyes, rinse with cold water for at least 10 minutes and seek medical attention immediately.
5. Troubleshooting
If you encounter issues with your VTOMAN FlashSpeed1500 Extra Battery, refer to the table below for common problems and solutions.
| Trouble Phenomenon | Trouble Shooting | Solution |
|---|---|---|
| Product cannot be charged | 1. Product input interface not connected well, or charging indicator light is off. | Reconnect the product input interface. |
| 2. Connection is good, but charging indicator does not light. | Charger is damaged. Contact after-sales service. | |
| 3. Charging indicator is on, but cannot be charged. | If product is damaged, contact after-sales service. | |
| Product cannot be output | 1. Main battery and extra battery not properly connected. | Connect main battery and extra battery correctly. |
| 2. Battery is too low. | Use main battery with a charger to charge it. | |
| 3. Power of equipment exceeds product's application scope. | Replace product with larger power battery or reduce load power. | |
| 4. All above tried, fault not eliminated. | If product is damaged, contact after-sales service. | |
| Output is interrupted during use | 1. Power of equipment exceeds product's application scope. | Replace product with a larger specification. |
| 2. Power of device is too small, causing product to fail to identify. Automatically turns off output. | Restart. | |
| 3. All above tried, fault not eliminated. | If product is damaged, contact after-sales service. |
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | FlashSpeed 1500 Extra Battery |
| Model No. | PB-81 |
| Application | Home Energy |
| Battery Capacity | 1548Wh |
| Battery Type | LiFePO4 |
| Nominal Capacity | >3500mAh |
| Rated Power | 1500W |
| Peak Power | 3000W |
| Operating Temperature | -20°C to 55°C (-4°F to 131°F) |
| Charging Temperature | 0°C to 55°C (32°F to 131°F) |
| Product Weight | 12.8KG |
| Product Size | 42 x 29.6 x 25.5cm |
| Certifications | CE, FCC, RoHS, UL, UKCA |
7. User Tips
- Always ensure the CP3500 connection cable is securely fastened between the extra battery and the main power station to prevent accidental disconnections during operation.
- For optimal performance and longevity, avoid fully depleting the battery frequently. Recharge when the power level is low.
8. Warranty and Support
Warranty Information
- The VTOMAN FlashSpeed1500 Extra Battery comes with a 24-month warranty.
- The warranty period commences from the original purchase date by the customer.
- To claim warranty service for quality issues, customers must provide valid proof of purchase or other required information.
Additional Resources
A detailed user manual with further information and diagrams is available in PDF format: