Potensic ATOM

Contents

Potensic ATOM Drone User Manual

Model: ATOM

V02. 23. 12

Potensic ATOM drone with remote controller, battery charging hub, and carrying bag.

1. Introduction

The Potensic ATOM drone is a portable and easy-to-use device, weighing less than 249g with foldable arms. It features a vision positioning system for precise hovering indoors and outdoors, and a GPS sensor for accurate positioning and auto-return functions. The drone is equipped with a 1/3" Sony CMOS image sensor, capable of shooting 4K/30FPS HD video and 12MP pictures. A 3-axis gimbal ensures stable footage. The remote controller utilizes PixSync 3.0™ 2.4G digital video transmission technology, offering a communication distance of up to 6km and 720p HD video transmission in ideal conditions. The drone boasts a maximum horizontal flight speed of 16m/s (52ft/s) and can withstand winds up to Level 5.

Safety & Precautions

  • Keep the drone away from crowds, high-rise buildings, high-voltage cables, and severe weather conditions (wind, rain, thunder).
  • Avoid moisture to prevent damage to electronic components.
  • Ensure safe operation by being well-rested and experienced. Use original parts for repairs.
  • Keep clear of high-speed revolving propellers to avoid injury to people and animals.
  • Store away from heat sources to prevent deformation or damage.
  • Users under 16 must be accompanied by an adult.
  • Do not dismantle or refit the product, except for propellers.
  • Recharge the intelligent battery with a USB charger conforming to FCC/CE standards.
  • Do not short-circuit or squeeze the battery.
  • Do not place the battery in hot places (fire or near electric heater).
  • Avoid low-altitude flight above water surfaces.
  • Keep away from airports, airlines, and other no-fly zones.

2. Setup Guide

Package Contents

The Potensic ATOM drone package includes the following items:

Full package contents including drone, remote controller, batteries, charger, cables, propellers, and carrying bag.

Image: Potensic ATOM Fly More Combo package contents.

  • Potensic ATOM Drone
  • Remote Controller
  • Camera
  • Batteries (Three batteries total weight 374g for Fly More Combo)
  • Charger
  • USB Cable
  • Operating Instructions (User Manual)
  • Original Box

Preparing the Drone

The drone is delivered in a folded state. Follow these steps to prepare it for flight:

  1. Remove the gimbal protector.
  2. Unfold the front arms first, then the rear arms.
  3. Unfold the propeller blades.
Potensic ATOM drone being held, showing its compact, foldable design.

Image: Drone in folded and unfolded states.

Preparing the Remote Controller

To set up the remote controller and connect your mobile device:

  1. Unfold the antenna.
  2. Connect your mobile phone to the USB cable.
  3. Insert the part of your mobile phone with the USB cable into the slot of the remote controller.
  4. Pull and open the remote controller with both hands and fix your mobile phone stably.
  5. Connect the other end of the USB cable to the remote controller.
  6. Take out the control sticks.
  7. Screw in both control sticks clockwise.
  8. Installation is complete.

Charging, Startup, and Shutdown

Charging the Battery:

When you receive a new drone battery, it needs to be charged to activate it. Connect the TYPE-C charging port of the battery to a USB charger (not included, must conform to FCC/CE standards). The red indicator will be solid during charging and turn off when complete. For faster charging, use the Parallel Charging HUB (if purchased separately) which can charge up to 3 batteries simultaneously. The shortest charging period is approximately 1 hour 25 minutes with a 5V/3A output charger.

Note: It is suggested to remove the battery from the drone for charging. If charged while in the drone, the drone will power off automatically. Do not charge a hot battery; let it cool down first. Charge the battery every three months if not in use to maintain cell activity. Use the original cable or one supporting over 3A current to avoid charging failure or battery damage.

Startup:

  • Drone: Insert the battery into the battery bin. Short press, then long press the power button until all indicators are on, then release.
  • Remote Controller: Long press the "Power" button until all indicators are on, then release.

Shutdown:

  • Drone: Short press, then long press the power button until all indicators are off, then release.
  • Remote Controller: Long press the power button until all indicators are off, then release.

App Download & Registration

Scan the QR code below to download the PotensicPro App, watch tutorial videos, access the latest User Manual, and find FAQs.

QR code for PotensicPro App download and tutorials.

Image: QR code for PotensicPro App.

Register a personal account in the App before your first flight for a better user experience. Fill in your email, password, check the protocol, and tap "Register". An internet connection is required for registration.

3. Operating Instructions

Flight Environment Requirements

  • Do not fly in severe weather (gale, rain, snow, fog).
  • Fly only in open areas. Tall structures and large metal objects can affect GPS accuracy. Keep at least 5m away from structures.
  • Keep the drone within sight and away from obstacles and crowds.
  • Avoid places with high-voltage power lines, telecommunication base stations, or launching towers to prevent remote controller interference.
  • Use with caution at altitudes over 3,000m as battery and power system performance may be affected.

Pre-Flight Checklist

  • Ensure the remote controller, intelligent flight battery, and mobile device are fully charged.
  • Verify the drone is intact and propellers are correctly installed.
  • Check if the camera is working normally after power-on.
  • Confirm the App is running normally.
  • Ensure the SD card is inserted and the camera lens is clean.
  • Take off from a flat, hard surface. Avoid sandstone or bushes.
  • Be cautious when taking off from moving objects (vehicles, ships).
  • GPS positioning and waypoint flight are disabled in polar regions.
  • Avoid extremely cold or hot environments.

Connection

  1. Prepare the remote controller as per section 2.3 and turn it on.
  2. Prepare the drone as per section 2.2 and turn it on.
  3. Launch the PotensicPro App to view the connection status. Connection is complete when the App shows a connected icon.
  4. Tap "Enter Device" to enter the flight interface.

Flight Modes

The ATOM drone offers three flight modes: Video, Normal, and Sport, selectable via the App.

  • Video Mode: Ascent speed: 2m/s, descent speed: 2m/s, flight speed: 6m/s. The drone defaults to Beginner Mode in this setting.
  • Normal Mode: Ascent speed: 4m/s, descent speed: 3m/s, flight speed: 10m/s. Available after exiting Beginner Mode.
  • Sport Mode: Ascent speed: 5m/s, descent speed: 4m/s, flight speed: 16m/s. Recommended for experienced users seeking high responsiveness.

Beginner Mode

For first-time users, the drone is automatically set to Beginner Mode. In this mode:

  • Flight distance and height are restricted to 0-30m.
  • Speed level is restricted to Video Mode speed.
  • Beginners are advised to learn and master drone controls in this mode.

Takeoff, Landing, and Hovering

Manual Takeoff:

  1. Start Motors: Push both control sticks to the bottom inner or outer corners for 2 seconds. Release once motors are spinning.
  2. Take Off: Gently push the throttle control stick upwards. Release the stick when the drone leaves the ground and hovers.

Manual Landing:

Pull the throttle control stick down until the drone lands. Release the stick when motors stop spinning.

Note: Always take off and land from a stable, level surface. Do not take off or land from your hand. If the drone is in a non-static state, push both sticks to the bottom inner or outer corners for 2s to force unlock. Stay at least 5m away from the drone for safety.

One-key Takeoff/Landing:

  • One-key Takeoff: Tap the one-key takeoff button in the App, then swipe right in the pop-up window. The drone will automatically ascend to 1.2m and hover.
  • One-key Landing: Tap the one-key landing button in the App, then swipe left in the pop-up window to land, or swipe right to return.

Intelligent Flight Modes

The Potensic ATOM offers several intelligent flight modes for enhanced creativity and ease of use.

QuickShots:

QuickShots include Pull-Away, Rocket, Circle, Spiral, and Boomerang modes. The drone records the target based on the selected mode and automatically generates a short video saved to the MicroSD card.

Drone flying above two people on a beach, highlighting intelligent modes like High-precision GPS, Auto Return, and QuickShots.

Image: Drone demonstrating intelligent flight modes.

How to Start QuickShots:

  1. Tap the QuickShots icon in the App.
  2. Choose a shooting mode and set parameters.
  3. Tap or drag-select your target (human recommended), then tap to begin recording.

How to Exit QuickShots:

  1. Tap the exit icon in the App or move a control stick to stop recording. The drone will hover.
  2. Tap the exit icon on the right to exit QuickShots.

QuickShots Conditions:

  • Drone must be airborne with strong GPS signal.
  • MicroSD card must be inserted with available storage.
  • Sufficient battery level.
  • Drone is not in auto-flight state (auto return or landing).
  • Drone must be at least 2m above the ground.
  • Gimbal pitch angle needs to be between -75° to -15° when locking the target.

Visual Tracking:

The drone automatically tracks a selected subject to record and generate a short video, saved to the MicroSD card.

Drone tracking a person on a beach, demonstrating accurate visual tracking.

Image: Drone performing visual tracking.

How to Start Visual Tracking:

  1. Tap the Visual Tracking icon in the App.
  2. Tap or drag-select your subject, and choose the recording period (1, 3, 5 min or infinite).
  3. Tap to start Visual Tracking.

How to Exit Visual Tracking:

  1. Tap the exit icon in the App or move a control stick to stop and exit. The drone will hover.
  2. Tap the exit icon on the right to exit Visual Tracking.

Note: Visual Tracking is unavailable when the drone is on the ground. The gimbal dial will be unresponsive during Visual Tracking. If the tracked subject is lost, the drone will hover in place. The gimbal pitch angle needs to be between -75° to -25°. The drone must be at least 4m above the ground. The tracked subject should not move at a relatively high speed (recommended less than 4m/s).

Waypoint Flight:

When enabled, you can pin 2 or more waypoint coordinates in the App map, and the drone will fly over them sequentially.

How to Start Waypoint Flight:

When GPS signal is strong, tap the map in the lower left corner of the App to switch to map view, then tap the icon on the right to enter Waypoint Flight mode. Tap on the map to pin multiple waypoints, then tap to start Waypoint Flight.

How to Exit Waypoint Flight:

  1. Tap the exit icon on the right or move a control stick (except throttle) to stop and exit. The drone will hover.
  2. Tap the exit icon on the right to exit Waypoint Flight.

Note: During Waypoint Flight, you can adjust flight altitude via the throttle control stick and gimbal tilt via the gimbal dial. The drone will exit the current flight task and hover if it reaches the virtual fence.

Return to Home (RTH)

The RTH function allows the drone to return to its recorded HOME point. The drone must be in GPS mode for RTH to function.

Regular Return Steps:

  1. Ascent: The drone ascends to the set return altitude (skipped if already higher).
  2. Level Flight: The drone flies straight at the set altitude towards the HOME point.
  3. Landing: The drone automatically lands and stops propellers upon reaching the HOME point.

How to Start RTH:

  • One-key RTH: Press and hold the RTH button on the remote controller for 1s, or tap the RTH icon in the App and swipe right.
  • Auto RTH: Triggered automatically if drone battery is low, signal is lost, or other abnormalities occur.

Note: If there are obstacles, it's recommended to keep the drone hovering or land manually. Set appropriate return altitude in the App. Tall buildings or obstacles can block the transmission signal. Do not initiate RTH if there are obstacles overhead.

Descending Return:

If flight altitude is >150m and flight distance >300m after 10s into RTH, the App will prompt to initiate descending return. The drone will descend while approaching HOME point. At 120m altitude, it switches to regular RTH.

How to Exit Descending Return:

Tap the exit icon on the left of the App interface or push the throttle control stick up for 2 seconds. The drone will switch to regular return.

Emergency Stop

For emergency situations, press the "Shoot" and "Record" buttons on the remote controller simultaneously for 2s until it beeps. The drone will stop running and fall down.

Note: Use with caution as stopping motors mid-flight will cause the drone to crash.

Remote Controller Functions

The remote controller features various buttons and controls:

FunctionDescription
Power ButtonLong press for 2s to power on/off.
Power IndicatorIndicates power level and status.
Control Stick SlotUsed to store control sticks.
TYPE-C InterfaceFor charging remote controller/connecting mobile device.
RTH/Pause ButtonLong press for 1s for RTH. Short press to pause auto flight.
Control StickControls drone movement (throttle, pitch, roll, yaw).
Foldable Dual AntennasFor signal transmission.
Mobile Device Installation PositionArea to place mobile device.
Shoot ButtonShort press to shoot one picture.
Record ButtonShort press to start/stop recording.
Gimbal DialControls camera tilt (head up/down).

Antenna Angle

Adjust the antenna angle based on drone height and distance for optimal communication. Point both antennas directly towards the drone for longer transmission distance. Avoid crossing antennas or pressing them on your mobile device.

Diagram showing optimal and suboptimal remote controller antenna angles for drone communication.

Image: Remote controller antenna angle guidelines.

4. Maintenance

Battery Care

  • Charge the battery every three months if not used for a long time.
  • Store the battery in a cool, dry place, out of reach of children.
  • Avoid charging when battery temperature is below 0°C or above 40°C.
  • The smart battery has self-discharge protection, overcharge protection, temperature protection, intelligent current limiting, overdischarge protection, short-circuit protection, and battery health monitoring.

Propeller Care and Replacement

  • Ensure marked propellers are attached to marked arms and unmarked to unmarked arms. Incorrect installation will prevent flight.
  • If a propeller is broken, replace both propellers on that motor with new ones from the same package. Do not mix propellers from different packages.
  • Propeller blades are sharp; handle with care. Do not squeeze or bend them.
  • Stay away from rotating propellers and motors to avoid injuries.
  • Check propeller blades for jitters or damage before each flight and replace if necessary.
  • Ensure motors are securely mounted and rotate smoothly. Land immediately if a motor is stuck or making abnormal sounds.
  • Make sure propellers are securely installed and screws tightened before each flight.
  • When mounting or removing propellers, do not insert tools or foreign materials into the motors.

Gimbal and Camera Care

  • Remove the gimbal protector before powering on the drone.
  • Do not collide, tap, or apply external force to the gimbal.
  • Ensure no objects are on or around the gimbal and the lens is clean before takeoff.
  • Do not pull the gimbal by force. Contact support for damage to the shock absorption support.
  • Do not modify the gimbal or stick objects on it to avoid damage.
  • Do not touch the lens after recording for a long period to avoid scalding.
  • Do not record video when the drone is not flying to prevent overheat protection.
  • Clean the camera and TOF transceiver tube with a soft cloth if there is dirt, dust, or water.

5. Troubleshooting & Calibration

Drone Status Indicator

The drone's tail indicator provides important status information:

StatusIndicator BehaviorMeaning
Startup/ShutdownGreen indicator solid onIn progress
Flight StatusFlashes slowly in greenGPS positioning
Flashes slowly in cyanVision positioning
Flashes slowly in blueAttitude mode
Warning & ErrorSolid blueRemote controller has no connection
Flashes quickly in redLow battery
Solid redSensor error
Repeatedly lights up shortly in red then off longEmergency stop of propeller
Upgrade & CalibrationAlternative flashing between red and greenCompass calibration (horizontal)
Alternative flashing between blue and greenCompass calibration (vertical)
Flashes quickly in greenFrequency pairing mode
Flashes quickly in blueUpgrade mode

Calibration Procedures

Compass Calibration:

Perform compass calibration:

  • Before the first flight.
  • When flying at a new location more than 50km (31 miles) from the last flight location.

Note: Do not calibrate in areas with strong magnetic interference (e.g., near metal structures, power lines). Keep away from other electronic devices. Ensure the drone is at least 1.5m (4.92ft) above ground. Not necessary for indoor flights. Do not calibrate with arms folded.

Procedure:

  1. When prompted by the App, tap "Start Calibration". The drone status indicator will flash red and green.
  2. Hold the drone horizontally and rotate it 360° until the App shows vertical calibration. The indicator will flash blue and green.
  3. Hold the drone vertically and rotate it 360° around a vertical axis until the App confirms calibration is complete.
Diagram showing horizontal and vertical compass calibration steps for the drone.

Image: Compass Calibration steps.

If "Calibration failed" repeatedly, change location and retry.

Gimbal Calibration:

Perform gimbal calibration:

  • If the gimbal is not working or unlevel after powering on.
  • If the gimbal is unstable or unable to stay level in flight.

Procedure:

  1. In the App, go to Settings > "Gimbal Calibration". Place the drone on a level surface with the bottom facing up.
  2. Tap "Start Calibration". The live transmission view will appear.
  3. Calibration is complete when the progress bar is fully loaded and the App prompts "Calibration Succeeded".

Note: Do not move the drone significantly during calibration.

Gimbal Fine-Tuning:

Manually adjust the roll and yaw offset angles of the gimbal if it is slightly tilting on level ground. Access "Gimbal Fine-Tuning" in App Settings. Adjust angles within ±10° using the "+/-" buttons. Tap "Default Value" to restore original settings.

Remote Controller Calibration:

Perform remote controller calibration:

  • If the drone drifts automatically without control stick input.
  • If the drone auto-rotates sideways continuously.
  • If control sticks are over-sensitive or lack sensitivity.

Procedure:

  1. Turn on the remote controller, connect mobile device, go to App Settings > "Remote Controller Calibration".
  2. Ensure control sticks are in the middle position.
  3. Tap "Start Calibration", then follow on-screen instructions to toggle sticks in all directions until 100% is displayed, then toggle the Dial back and forth.
  4. Calibration is complete when the App prompts "Calibration Succeeded".

Drone Re-pairing:

Re-pairing is required if you replace the drone or remote controller.

Procedure:

  1. Turn on the remote controller, connect mobile device, go to App Settings > "Calibration" > "Re-pairing the drone".
  2. Power on the drone and long press the power button until drone status indicators flash green, indicating it's ready for pairing.
  3. Wait for about 7s. Pairing succeeds when the controller beeps "Di" and live transmission is visible in the App.

Note: Ensure the distance between the remote controller and drone is within 1m (3.3ft) and away from other 2.4G frequency interference during pairing. Do not move or operate during pairing.

6. Specifications

Drone

FeatureSpecification
ModelDSDR04C
Takeoff Weight< 249g (includes battery and propeller blades)
Folded Size88 x 143 x 58mm
Unfolded Size (propeller blades included)300 x 242 x 58mm
Unfolded Size (propeller blades excluded)210 x 152 x 58mm
Diagonal Distance219mm
Max Speed (Sport Mode)Ascent: 5m/s; Descent: 4m/s; Flight: 16m/s
Max Wind Speed Resistance38km/h (Level 5)
Maximum Flight Altitude120m / 393.7ft
GNSSGPS+GLONASS+Galileo+BeiDou
Operating Temperature0°C ~ 40°C
Operating Frequency2.400-2.4835GHz
Transmission Power2.4GHz: <20dBm
Hovering Accuracy Range (Vertical)±0.1m (with Vision Positioning), ±0.5m (with GPS Positioning)
Hovering Accuracy Range (Horizontal)±0.3m (with Vision Positioning), ±1.5m (with GPS Positioning)
Extra PayloadNot supported
Max Flight Time32min (at breezeless condition and even speed of 5m/s)
Max Hover Time29min (in indoor hovering)

Camera

FeatureSpecification
Lens Tilt Range+20° ~ -90°
CMOS1/3"
Effective Pixel12MP
ISO Range100 ~ 6400
Electronic Shutter Speed1/24s ~ 1/25000s
FOV78°
ApertureF2.2
Photo Resolution4608 x 2592
Image FormatJPG/JPG+RAW(DNG)
Video Resolution4K@30/25/24fps; 2.7K@30/25/24fps; 1080P@60/50/30/25/24fps
Video FormatMP4 (H.264)
Max Video Bitrate50Mbps
Supported File SystemFAT 32, exFAT
Type Of Supported Storage CardMicroSD card; 4~256GB SD card transmission speed class10 or U1 standard

Remote Controller

FeatureSpecification
ModelDSRC02A
Operation Frequency2.402-2.483GHz
Max Transmission Distance6km (unobstructed, free of interference)
Operating Temperature0°C ~ 40°C
Battery3000mAh, lithium battery, 1S
Transmitter Power (EIRP)2.4GHz: ≤20dBm
Charging InterfaceTYPE-C
Charging Specification5V/1A
Video Transmission SystemPixSync 3.0™
Video Transmission Quality720P
Latency (depending on environment and mobile device)200ms
Supported Mobile Device SizeLength: 170mm, Width: 100mm, Thickness: 6.5mm~8.5mm

Smart Flight Battery

FeatureSpecification
ModelDSBT02B
Capacity2230mAh
Voltage7.7V
Battery TypeLi-Po 2S
Energy17.18Wh
Battery Weight84g
Working Temperature0°C ~ 40°C

7. Warranty & Support

Warranty Information

The Potensic ATOM drone comes with a 30-day warranty.

Contact Support

For any problems or assistance, please contact the Potensic support team:

  • Email: support@potensic.com
  • Email (UK): support.uk@potensic.com
  • Email (DE): support.de@potensic.com
  • Email (FR): support.fr@potensic.com
  • Email (IT): support.it@potensic.com
  • Email (ES): support.es@potensic.com
  • Email (JP): support.jp@potensic.com
  • Web: www.potensic.com
  • Facebook: www.facebook.com/Potensic

When requesting after-sales service, it is required to submit your order ID and details of the issues.

User Manual (PDF)

A detailed user manual in PDF format is available for download. You can view it here: Potensic ATOM User Manual (PDF).

8. User Tips

  • Always read the directions thoroughly before operating the drone to ensure ease of use and safety.
  • The drone offers sharp video quality and good stability, making it suitable for capturing detailed footage.
  • It is recommended for both beginners and intermediate operators due to its user-friendly features.
  • Perform all necessary calibrations and adjustments in an open field before your first flight to ensure optimal stability and camera performance.
  • Be aware of local regulations; for example, in some regions, you may need to register as a drone pilot even if the drone weighs less than 250g.
  • The drone comes in a secure case, which is great for protecting your equipment during transport.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.