Introduction
Thank you for choosing the MCHOSE K7 Ultra Gaming Mouse. This high-performance wireless mouse is designed for competitive gaming, featuring a PAW3950 sensor, 8K polling rate, and up to 42000 DPI. It offers both wired and wireless connectivity, magnetic charging, and a lightweight design for extended comfort. This manual provides detailed instructions to help you set up, operate, and maintain your new gaming mouse.
Package Contents
Please ensure all items are present in your package:
- MCHOSE K7 Ultra Gaming Mouse
- 8K Receiver
- Magnetic Charging Base
- USB Type-C Cable
- Customized Mouse Storage Bag
- User Manual (PDF available online)
Specifications
| Feature | Detail |
|---|---|
| Brand Name | MC (MCHOSE) |
| Type | 2.4Ghz Wireless |
| DPI | Up to 42000 |
| Number of Buttons | 6 |
| Number of Rollers | 1 pcs |
| Hand Orientation | Right |
| Interface Type | USB |
| Power Type | Rechargeable |
| Operation Mode | Opto-electronic |
| Gross Weight | 59g |
| Certification | CE, FCC, RoHS, KC |
Setup Instructions
1. Initial Charging
Before first use, it is recommended to fully charge the mouse.
Magnetic Wireless Charging Dock:
- Connect the standard USB cable to your computer's USB port.
- Plug the Type-C end of the cable into the magnetic wireless charging dock.
- Place the mouse properly on the magnetic wireless charging dock. The indicator light on the mouse will turn solid red to indicate charging.
- Once fully charged, the indicator light will turn solid green.
- If both wired and wireless charging methods are connected, wired charging will take priority.
Wired Charging:
- Connect the standard USB cable to your computer's USB port.
- Plug the Type-C end of the cable directly into the mouse's Type-C port. The mouse will switch to wired mode and begin charging.
2. Connecting the Mouse
2.4G Wireless Connection:
- Switch the power button on the mouse to the [2.4G] position.
- Plug the standard USB cable into your computer's USB port and the Type-C end into the magnetic wireless charging dock.
- **Manual Pairing (if needed, default is pre-paired):** Press and hold the mouse's Left, Middle, and Right buttons simultaneously for approximately 5 seconds until the green indicator light flashes rapidly.
- Insert the standard USB cable's Type-C end into the magnetic wireless charging dock (which is connected to the computer). Bring the mouse within 20cm of the dock. The indicator light will turn off once pairing is successful.
- If both 1K and 8K receivers are connected to the computer, the mouse will pair with the one that was plugged in first.
Bluetooth Wireless Connection:
- Switch the power button on the mouse to the [B] (Bluetooth) position.
- On your computer or device, search for Bluetooth devices and select "MCHOSE K7 Ultra" to connect.
- If the connection fails, press and hold the mouse's Left, Middle, and Right buttons simultaneously for approximately 3 seconds until the indicator light flashes rapidly to re-enter pairing mode.
- Once connected, the indicator light will turn off.
Wired Connection:
Simply connect the mouse directly to your computer using the provided USB Type-C cable. The mouse will automatically switch to wired mode.
Operating Instructions
DPI Adjustment
The K7 Ultra mouse features a dedicated DPI switch button (located on the underside or top, refer to product diagram) to cycle through different DPI levels. Each level is indicated by a specific color on the mouse's indicator light:
- Level 1: Red Light (400 DPI)
- Level 2: Blue Light (800 DPI)
- Level 3: Green Light (1600 DPI)
- Level 4: Yellow Light (3200 DPI)
- Level 5: Cyan Light (6400 DPI)
- Level 6: Purple Light (42000 DPI)
Driver Software (M HUB)
For advanced customization, including button remapping, macro settings, and precise DPI adjustments, install the MCHOSE M HUB driver software.
Web Driver:
- Visit https://www.mchose.store/pages/firmware-2 in your web browser.
- Click on "Open M HUB WEB" > "Initialize Device" > "Allow Browser Access".
- Select your corresponding product model to connect and customize.
Desktop App Driver:
- Visit https://www.mchose.store/pages/firmware-2.
- Click on "Download M HUB Driver" and follow the installation instructions.
- Note: The MHUB desktop app currently supports Windows 10 and above. Windows 7 and macOS are not supported at this time.
Maintenance and Care
Battery Status Indicator:
- Flashing Red: Please charge the mouse.
- Solid Red: Mouse is currently charging.
- Solid Green: Mouse is fully charged.
Charging Safety Instructions:
- It is recommended to charge the mouse only via the computer's USB port.
- Do not use low-quality, non-standard power adapters to charge the mouse.
- Avoid using over-voltage or over-current power adapters.
- Keep the mouse away from high-temperature devices during charging.
- Turn off the power switch when the mouse is not in use for an extended period to preserve battery life.
These charging instructions also apply to other rechargeable devices.
General Care:
- Clean the mouse regularly with a soft, dry cloth.
- Avoid exposing the mouse to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the mouse, as this may void the warranty.
Troubleshooting and FCC Notice
Common Issues:
- Mouse not responding: Ensure the mouse is charged and correctly connected (2.4G, Bluetooth, or wired). Check the power switch.
- Connection issues: Try re-pairing the mouse (refer to Setup Instructions). Ensure the receiver is properly plugged in for 2.4G mode.
- DPI not changing: Press the DPI switch button firmly. Check the indicator light color to confirm DPI level.
- Driver software not detecting mouse: Ensure the mouse is connected and powered on. For desktop app, confirm your Windows version is 10 or above.
FCC Compliance Notice:
This device has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
User Tips
- Lightweight Design: Users appreciate the mouse's lightweight (59g) and responsive design, which contributes to comfortable and precise gaming sessions.
- Customization: Utilize the M HUB driver software to fine-tune DPI settings, button assignments, and other parameters to match your personal preferences and game requirements. This can also help adjust scroll speed and click behavior.
- Charging Habits: To ensure uninterrupted gaming, make it a habit to place the mouse on its magnetic charging base when not in use. The solid green indicator confirms a full charge.
Warranty and Support
For detailed warranty information and customer support, please refer to the official MCHOSE website or contact your retailer.
An electronic version of this user manual is available in PDF format. You can view or download it from the following link: MCHOSE K7 Ultra User Manual (PDF).