Koso Koso Mini LED Digital Voltmeter

Contents

Universal Motorcycle Voltmeter User Manual

Model: Koso Mini LED Digital Voltmeter

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Koso Mini LED Digital Voltmeter. This universal voltmeter is designed to monitor the electrical system of motorcycles, electromobiles, and other 12V-100V DC vehicles, providing real-time voltage readings.

2. Package Contents

  • Koso Mini LED Digital Voltmeter Unit
  • Mounting Holder
  • Wiring Harness
  • Connectors (typically red crimp connectors)
Voltmeter unit with wiring and connectors

Image: Koso Mini LED Digital Voltmeter unit, wiring harness, and included connectors.

3. Specifications

FeatureDetail
Model NameMotorcycle Universal voltmeter
MaterialLED And Plastic
Display Range12V-100V DC
Effective VoltageDC12V (Operating voltage)
Display ColorsRed, Blue, Green
FitmentUniversal
Holder PositionLeft/Right
Item Length56mm (2.2 inches)
Item Width28mm (1.1 inches)
Item Height11mm (0.43 inches)
Item Weight0.10kg (0.22 lbs)
OriginMainland China
Dimensions of the Koso Mini LED Digital Voltmeter: 56mm length, 28mm height, 11mm depth.

Image: Voltmeter dimensions (56mm x 28mm x 11mm).

4. Setup and Installation

  1. Vehicle Compatibility: Before installation, confirm that the product model is suitable for your vehicle's electrical system (12V-100V DC).
  2. Mounting Location: Choose a suitable location on your motorcycle's handlebar or dashboard for mounting the voltmeter. The included holder can be attached to either the left or right side.
  3. Secure Mounting: Securely attach the voltmeter unit to the mounting holder, and then attach the holder to your chosen location. Ensure it does not obstruct your view or control of the vehicle.
  4. Wiring:
    • Identify the positive (+) and negative (-) wires from your vehicle's electrical system. It is recommended to connect the voltmeter to a switched power source (e.g., ignition-switched power) so it turns off with the vehicle.
    • Connect the Red wire from the voltmeter to the vehicle's positive (+) power source.
    • Connect the Black wire from the voltmeter to the vehicle's negative (-) or ground.
    • Use the provided connectors or appropriate electrical connectors to ensure secure and insulated connections.
  5. Test: Turn on your vehicle's ignition. The voltmeter display should illuminate and show the current voltage.
Blue LED voltmeter installed on a motorcycle handlebar, showing a voltage reading.

Image: Example installation of the voltmeter on a motorcycle handlebar.

Close-up of the back of the voltmeter unit showing red and black wires for power connection.

Image: Rear view of the voltmeter showing wiring connections (Red: Positive, Black: Negative).

5. Operating Instructions

Once properly installed and powered, the Koso Mini LED Digital Voltmeter will automatically display the real-time voltage of your vehicle's electrical system. The bright LED display provides clear readings. No further user interaction is required for operation.

Three Koso voltmeters displaying 19.9V in Red, Blue, and Green LED colors.

Image: Available display colors: Red, Blue, and Green.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display and housing. Do not use abrasive cleaners or solvents.
  • Protective Film: The voltmeter comes with a protective film on the display. You may remove it for clearer viewing or keep it on for added scratch protection.
  • Regular Checks: Periodically inspect the wiring connections to ensure they remain secure and free from corrosion. Regularly check the performance of various vehicle components, including the battery and charging system, in conjunction with the voltmeter readings.
Koso voltmeter with a protective film partially peeled off the display.

Image: Voltmeter display with a protective film.

7. Troubleshooting

  • No Display:
    • Check all wiring connections (positive and negative) for proper contact.
    • Ensure the vehicle's ignition is on if connected to a switched power source.
    • Verify that the vehicle's battery has sufficient charge.
  • Incorrect Voltage Reading:
    • Ensure connections are secure and free from corrosion, which can cause voltage drops.
    • Compare the reading with another known good voltmeter if available.
  • Display Difficult to See in Sunlight:
    • Some users report that the green LED display offers better visibility in bright sunlight compared to red. Consider this when choosing your unit.

8. User Tips

  • For optimal visibility in bright conditions, consider selecting the voltmeter with a green LED display.
  • This voltmeter is an excellent tool for continuously monitoring your motorcycle's battery health and charging system performance.
  • The unit is designed to work with power supplies within its 12V-100V DC range, such as a 13.6V power source.
  • If connected to a constant power source, the voltmeter will remain on continuously. For most applications, connecting to an ignition-switched power source is recommended.
  • If the included stickers for mounting are not sufficient, consider using alternative secure mounting methods suitable for your vehicle.

9. Safety Information

ATTENTION: Regularly check the performance of various vehicle components and pay attention to safety. Ensure all electrical connections are properly insulated to prevent short circuits.

10. Warranty and Support

For warranty information and technical support, please refer to the seller or manufacturer's official channels. Keep your purchase receipt for any warranty claims.

© 2024 Koso. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.