DJI Pocket 3 Creator Combo

Contents

DJI Osmo Pocket 3 Creator Combo User Manual

Model: Pocket 3 Creator Combo

DJI Osmo Pocket 3 Creator Combo product image

The DJI Osmo Pocket 3 Creator Combo, a compact 1-inch CMOS pocket gimbal camera.

Introduction

The DJI Osmo Pocket 3 is a handheld gimbal camera featuring three-axis mechanical stabilization, designed for capturing stable and smooth videos across various scenarios. Its 1-inch CMOS sensor ensures high-quality, low-noise footage, even in high-contrast environments. The 10-bit D-Log M color mode enhances color perception and dynamic range, facilitating professional post-production color correction.

The rotatable touchscreen allows for easy live view monitoring, quick switching between horizontal and vertical shooting, and intuitive adjustment of settings. The device incorporates a built-in three-mic array for effective wind noise reduction and stereo sound recording, with support for external microphones and monitoring earphones. The Creator Combo includes various accessories to enhance your creative possibilities.

Product Overview

DJI Osmo Pocket 3 overview diagram

Diagram illustrating the main components of the DJI Osmo Pocket 3.

  1. Camera
  2. Pan Motor
  3. Microphones
  4. Rotatable Touchscreen
  5. Speaker
  6. Status LED
  7. 5D Joystick
  8. microSD Card Slot
  9. Quick-Release Slot I
  10. USB-C Port
  11. Shutter/Record Button
  12. Quick-Release Slot II
  13. Lanyard Hole
  14. Tilt Motor
  15. Roll Motor

Key Features

  • Powerful 1-Inch Sensor: A large CMOS sensor and 4K/120fps UHD footage capture experiences in dynamic, buttery smooth detail.
  • Diagram of the 1-inch CMOS sensor

    Visual representation of the 1-inch CMOS sensor.

  • Three-Axis Stabilization: Shoot smooth, stable hand-held footage. Adjust Rotational Speed to track different-paced scenarios.
  • Diagram showing 3-axis gimbal stabilization

    Illustration of the 3-axis gimbal mechanical stabilization.

  • 2-Inch Rotatable Touchscreen: Upgraded OLED touchscreen for easy switching between horizontal and vertical shooting, parameter adjustment, and subject tracking.
  • Image of the rotatable touchscreen in use

    The rotatable touchscreen displaying camera view.

  • Full-Pixel Fast Focusing: Locks a subject in focus, even while moving. Product Showcase mode prioritizes foreground focus, ideal for livestreaming.
  • Demonstration of full-pixel fast focusing

    A comparison showing focus on a foreground object (strawberry) with full-pixel fast focusing enabled and disabled.

  • ActiveTrack 6.0: Utilizes follow modes like Face Auto-Detect and Dynamic Framing to keep your subject centered.
  • ActiveTrack 6.0 tracking a subject

    The camera actively tracking a moving subject using ActiveTrack 6.0.

  • Sound That Surrounds: Omnidirectional stereo recording and the ability to connect to two DJI Mic 2 Transmitters for clear audio.
  • Person recording with DJI Mic 2 for stereo sound

    A person recording with the Osmo Pocket 3 and a DJI Mic 2 transmitter clipped to their clothing, indicating stereo sound capture.

  • Glamour Effects 2.0: Direct output with clear and glowing complexion, customizable via the DJI Mimo app.
  • Demonstration of Glamour Effects 2.0

    A smartphone screen showing the DJI Mimo app interface with options for 'Face' and 'Body' adjustments, including 'Smooth', 'Brighten', and 'Slim' settings.

  • DJI OsmoAudio™: Connects Pocket 3 directly to two DJI Mic 2/Mic Mini transmitters, simplifying gear and workflow.
  • Person using DJI Osmo Pocket 3 with DJI Mic 2 for audio recording

    A person holding the Osmo Pocket 3 while wearing a DJI Mic 2 transmitter, illustrating the audio recording capabilities.

What's in the Box (Creator Combo)

  • Osmo Pocket 3 × 1
  • Type-C to Type-C PD Cable × 1
  • Osmo Pocket 3 Protective Cover × 1
  • DJI Wrist Strap × 1
  • Osmo Pocket 3 Handle With 1/4″ Thread × 1
  • Osmo Pocket 3 Wide-Angle Lens × 1
  • DJI Mic 2 Transmitter (Shadow Black) × 1
  • DJI Mic 2 Windscreen × 1
  • DJI Mic 2 Clip Magnet × 1
  • Osmo Pocket 3 Battery Handle × 1
  • Osmo Mini Tripod × 1
  • Osmo Pocket 3 Carrying Bag × 1
Contents of the DJI Osmo Pocket 3 Creator Combo box

All items included in the DJI Osmo Pocket 3 Creator Combo package.

Setup

Read Before Use

Before using your DJI Osmo Pocket 3, it is recommended to read the following documents:

  1. Safety Guidelines
  2. Quick Start Guide
  3. User Manual (this document)

For first-time users, watching the tutorial videos on the official DJI website or in the DJI Mimo app and reviewing the safety guidelines is highly recommended. Refer to the Quick Start Guide for initial setup and this User Manual for detailed information.

Download DJI Mimo App

The DJI Mimo app allows you to monitor the camera view, set parameters, control the camera with a mobile device, transfer and edit files, and use Wi-Fi livestreaming.

Search for "DJI Mimo" in your app store or scan the QR code below to download and install the app.

QR code to download DJI Mimo App

Scan this QR code to download the DJI Mimo App for iOS (12.0 or above) or Android (8.0 or above).

Inserting the microSD Card

The Osmo Pocket 3 requires a microSD card (not included) for storing footage. A UHS-I Speed Grade 3 rating microSD card is necessary for high-resolution video data due to its fast reading and writing speeds.

Insert the microSD card into the microSD card slot as shown in the diagram. To remove, gently push the card to partially eject it.

Diagram showing how to insert a microSD card into the Osmo Pocket 3

Illustration of microSD card insertion into the Osmo Pocket 3.

Powering On

To power on the Osmo Pocket 3, rotate the touchscreen clockwise or press the Shutter/Record button. If the "Screen Rotate & Capture" function is enabled, the camera will begin recording as soon as the touchscreen is rotated. The shooting mode will be based on your settings for this function. After shooting, the camera will automatically power off if idle for two seconds. To power off, press the Shutter/Record button for one second or rotate the touchscreen counterclockwise.

Diagram showing how to power on the Osmo Pocket 3 by rotating the screen

Illustration of rotating the screen to power on the device.

Activation

The camera must be activated using DJI Mimo before its first use:

  1. Power on Osmo Pocket 3.
  2. Enable Wi-Fi and Bluetooth on your mobile device.
  3. Launch DJI Mimo on your mobile device, tap to connect to the camera, and follow the on-screen instructions to activate.

Charging the Battery

Use the included Type-C to Type-C PD cable to connect the Osmo Pocket 3 to a USB-C charger (not included). DJI recommends using the DJI 65W Portable Charger, DJI 30W USB-C Charger, or other USB-C Power Delivery chargers.

When charging while powered off, the power status can be checked on the touchscreen. It takes approximately 16 minutes to charge the battery to 80% and 32 minutes for a full charge (tested with DJI 65W PD charger).

If the handle or battery handle is mounted, use the USB-C port on the rear of the handle for charging. Note that if a battery handle is mounted, it will only begin charging after the handheld gimbal camera's battery is fully charged.

Diagram showing how to charge the Osmo Pocket 3

Illustration of the Osmo Pocket 3 connected to a charger.

Accessories

Osmo Pocket 3 Handle With 1/4" Thread

The Osmo Pocket 3 Handle With 1/4" Thread (referred to as "handle") improves comfort during recording. Connect it to the USB-C port at the bottom of Osmo Pocket 3. The USB-C port on the rear of the handle can be used for charging or connecting external audio devices (wired digital headphones, wired microphones, wireless microphone receiver).

When detaching, press and hold the release button on the handle and unplug it.

Diagram showing attachment and detachment of the Osmo Pocket 3 Handle with 1/4 inch Thread

Instructions for attaching and detaching the handle. Hold the Pocket 3 as shown to avoid high temperatures on the upper part during extended high-specification video shooting.

Osmo Pocket 3 Battery Handle

The Osmo Pocket 3 Battery Handle (referred to as "battery handle") features a built-in 950mAh battery, extending operating time. Connect it to the USB-C port at the bottom of Osmo Pocket 3, ensuring it's firmly attached and clips are locked. The power level can be checked on the rotatable touchscreen. The USB-C port on the rear can be used for charging or connecting external audio devices.

To detach, press and hold the release button and unplug the handle. After detachment, press the release button once to check the battery level via the status LED.

Diagram showing attachment and detachment of the Osmo Pocket 3 Battery Handle

Instructions for attaching and detaching the battery handle, and checking its battery level.

Osmo Pocket 3 Wide-Angle Lens

Attach the magnetic Osmo Pocket 3 Wide-Angle Lens to the camera to achieve a wider shooting angle with 108° FOV and 15mm equivalent focal length.

Diagram showing attachment of the Osmo Pocket 3 Wide-Angle Lens

Illustration of attaching the magnetic wide-angle lens to the camera.

Osmo Mini Tripod

Both the handle and battery handle have a 1/4" screw hole at the bottom for installing the Osmo Mini Tripod. This allows the Osmo Pocket 3 to stand on a flat surface for fixed-position shooting.

Diagram showing attachment of the Osmo Mini Tripod

Illustration of attaching the mini tripod to the handle.

Osmo Pocket 3 Black Mist Filter (Optional)

The Osmo Pocket 3 Black Mist Filter features a magnetic design for easy attachment to the camera lens. The 1/4 black mist filter helps control highlight flares, lower image sharpness, and soften skin tones.

Diagram showing attachment of the Osmo Pocket 3 Black Mist Filter

Illustration of attaching the magnetic Black Mist Filter to the camera lens.

Osmo Pocket 3 Expansion Adapter (Optional)

The expansion adapter can be used to install an action camera or other accessories using its cold shoe mount.

Diagram showing attachment of the Osmo Pocket 3 Expansion Adapter

Illustration of attaching the expansion adapter to the Osmo Pocket 3.

Operating

Button Features

Shutter/Record Button

Diagram of the Osmo Pocket 3 with Shutter/Record button highlighted

Location of the Shutter/Record button on the Osmo Pocket 3.

OperationDescriptions
Press once when in live viewTake a photo or start/stop recording.
Press once when powered offPower on
Press and hold for 1 secondPower off

5D Joystick

Diagram of the Osmo Pocket 3 with 5D Joystick highlighted

Location and function of the 5D Joystick on the Osmo Pocket 3.

OperationDescriptions
Press onceBack
Press twiceRecenter the gimbal.
Press three timesSwitch the camera between facing forward and backward.
Push left or rightControl the camera movement in the pan axis.
Push up or pull downControl the camera tilt or zoom.
Press and holdLock the gimbal.

Operating the Touchscreen

Once powered on, the touchscreen displays the live view, shooting mode, battery level, and microSD card information. Interact with the handheld gimbal camera by tapping or swiping on the touchscreen.

Diagram showing touchscreen operations on Osmo Pocket 3

Illustration of various touchscreen gestures and their functions.

  • Tap once: Select features like smart gimbal mode, rotate camera, or tap on live view for focusing and spot metering.
  • Tap twice: Select a subject for ActiveTrack in the live view.
  • Swipe down from the top: Enter the control menu.
  • Swipe up from the bottom: Set shooting parameters (Aspect Ratio, Countdown Timer, Resolution).
  • Swipe right from the left edge: Enter playback and view the last taken footage.
  • Swipe left from the right edge: Adjust image and audio parameters.

Camera View

The camera view varies based on the shooting mode. The following is a general reference.

Diagram of the Osmo Pocket 3 camera view interface

The camera view interface with various indicators and controls.

  1. Storage Capacity Information: Displays remaining photos or video duration.
  2. Smart Gimbal Mode: Tap to select smart gimbal mode (Video mode only).
  3. Shooting Modes: Tap and swipe to select Panorama, Photo, Video, Low-Light, Slow Motion, and Timelapse.
  4. Battery Level: Displays current battery level. Tap for detailed information.
  5. Zoom: Tap to switch slider function between camera zoom and tilt.
  6. Gimbal Rotate: Tap to switch camera between facing forward and backward.

Swipe Down - Control Menu

Swipe down from the top of the screen to access the control menu. Tap icons to select various settings.

Diagram of the Osmo Pocket 3 control menu

The control menu interface with various settings icons.

  • Custom Mode: Create and manage up to five custom shooting modes.
  • Screen Rotate & Capture: Enables immediate recording upon screen rotation. Configure power-off behavior (Now, 2s, Never).
  • Brightness: Tap and slide to adjust screen brightness.
  • FT (Selfie): Automatically recognizes and follows your face for optimal selfie angles.
  • Wireless Microphone: Tap to link with TX1 or TX2 via Bluetooth (DJI Mic 2 Transmitter only).
  • Gimbal Startup Direction: Set camera direction (Forward, Backward, Last Setting) upon power-on.
  • Rotate screen to power off: If enabled, the camera can be powered off by rotating the touchscreen when not recording.
  • Slider Control: Switch slider function between camera zoom and camera tilt.
  • Selfie Flip: Mirrors the image automatically for a better selfie effect.
  • Built-in Mic Audio Backup: Records audio using the built-in microphone as a separate .wav file, useful with external mics.
  • OTG Connection: Connect to Android devices via Type-C to Type-C PD cable for file transfer.
  • Wireless Connection: Check wireless info, select Wi-Fi frequency, reset Wi-Fi connection.
  • Wearable Mode: Rotates camera to selfie mode and locks. Tap twice to recenter gimbal.
  • Gimbal Calibration: Calibrate the gimbal to reduce drift. Place on a stable, flat surface during calibration.
  • Joystick Speed: Adjust zoom and gimbal rotation speed.
  • Video Compression: Configure video coding format (HEVC or H.264).
  • Sounds: Set volume.
  • Grid: Display grid lines for leveling.
  • Anti-Flicker: Select anti-flicker frequency.
  • Timecode: Set or sync camera timecode.
  • Naming Management: Edit naming rules for storage folders and files.
  • Scrn Off When Rec: Set time for screen to turn off after recording starts.
  • Auto Power Off: Set duration for automatic power off when idle.
  • LEDs: Turn status LED on or off.
  • Continue Last Livestream: Continue livestream settings (DJI Mimo only).
  • Language: Set language.
  • Format: Format microSD card (deletes all data).
  • Factory Reset: Restore camera to original factory settings.
  • Device Info: View device name, serial number, firmware version, export log.
  • Compliance Info: View compliance information.

Swipe Up - Parameters Settings

Swipe up from the bottom of the screen to set parameters for each shooting mode.

Shooting ModesSettings
PanoramaSelect 180° or 3x3 panorama photo and set Countdown Timer.
PhotoSet Aspect Ratio and Countdown Timer.
VideoSet video resolution, frame rate, and aspect ratio.
Low-LightSet video resolution and frame rate.
Slow MotionSet the video resolution and speed ratio.
TimelapseSelect Hyperlapse, Timelapse, or Motionlapse. Tap the upper right corner to set the resolution and frame rate.

Swipe Right - Playback

Swipe right from the left edge of the screen to view the last taken footage. Swipe left from the right edge to return to live view.

  • After connecting to DJI Mimo, favorite photos or videos can be viewed from the Favorites section of the DJI Mimo Album.
  • Tap to mark as Favorites.
  • Delete the photo or video.

Swipe Left - Image Settings

Swipe left from the right edge of the screen to enter image and audio settings. Tap PRO to adjust pro parameters. Different parameters can be set in different shooting modes as shown in the table below.

Shooting ModesPRO Mode
SettingsExposureWhite BalanceFormatFocus ModeImage AdjustmentGlamour EffectsColorsAudio Parameters
Panorama✓✓✓✓
Photo✓✓✓
Video✓✓✓✓✓✓✓
Low-Light✓✓✓
Slow Motion✓✓✓✓✓
Timelapse✓✓✓
Hyperlapse✓✓✓✓✓
Motionlapse✓✓
  • Exposure: Auto and M (manual) modes available.
  • White Balance: AWB (Auto White Balance) and M (manual) modes available.
  • Format: JPEG or JPEG+RAW for panorama/photo. Video, Video+JPEG, or Video+RAW for Timelapse/Motionlapse.
  • Focus Mode: Single (motionless subjects), Continuous (moving subjects), Product Showcase Mode (foreground focus, Video mode only).
  • Image Adjustment: Adjust sharpness and noise reduction in Video, Slow Motion, and Hyperlapse.
  • Glamour Effects: Enable/disable glamour effects, adjustable via DJI Mimo.
  • Colors: Options include Normal, HLG, and D-Log M. D-Log M is for professional color grading, offering 10-bit color depth and wider dynamic range. HLG mode records with wide dynamic range for HLG-compatible displays.
  • Audio Parameters: Set Channel (Stereo/Mono), Wind Noise Reduction, Directional Audio (Front, Front and Back, All), and Gain (for external mics).

Setting the Shooting Mode

Tap the icon and swipe to select the desired shooting mode.

Diagram showing shooting mode selection on Osmo Pocket 3

Interface for selecting different shooting modes.

Shooting ModesDescriptions
PanoramaTake an ultra-wide angle panoramic photo (180° or 3x3 modes).
Take a photoTake a single photo or a countdown photo.
VideoRecord standard video.
Low-LightAutomatically adjusts exposure for improved image quality in low-light environments.
Slow MotionSupports 4x or 8x slow-motion video. Records at high frame rates and slows footage during playback. Audio is not included in slow-motion videos.
TimelapseSelect Hyperlapse (camera in motion), Timelapse (camera still), or Motionlapse (camera moves along preset positions). Records long events into short videos.

Selecting the Gimbal Mode

Swipe down from the top of the screen to enter the control menu and tap the icon to select the gimbal mode.

Diagrams illustrating different gimbal modes

Visual representation of the gimbal's movement in different modes.

  • Follow: (Default) Pan and tilt axes follow the handle, roll axis remains level. Suitable for vlogs and selfies.
  • Tilt Locked: Only the pan axis follows, tilt axis is locked, roll axis remains level. Ideal for scenarios with changing camera positions (high to low).
  • FPV: Camera rotates freely and follows handle movement. Suitable for dynamic shots with less stability.

Using ActiveTrack

In Photo or Video mode, double-tap the touchscreen to select a subject and enable ActiveTrack. The gimbal camera will automatically follow the selected subject. Press the 5D joystick or tap the touchscreen to exit ActiveTrack.

When FT (Selfie) is enabled, the camera automatically recognizes and tracks your face for the best selfie angle.

Diagram showing ActiveTrack selection on Osmo Pocket 3

Interface for selecting a subject for ActiveTrack.

ActiveTrack is not available in Panorama, Low-Light, Slow motion (1080P 8X/4K 4X), Timelapse, Motionlapse, or when SpinShot is enabled.

Using the Smart Gimbal Mode

In Video mode, tap the icon to select the smart gimbal mode and tap again to exit. Smart gimbal mode includes:

  • Face Auto-Detect Mode: Camera automatically follows the face closest to the center of the camera view.
  • Dynamic Framing Mode: Select the subject position in the live view using the 5D joystick based on the golden ratio or rule of thirds. The camera will track the subject while keeping it at the selected position.
  • SpinShot Mode: The camera automatically rotates 90° or 180° when shooting.
Diagram showing Smart Gimbal Mode selection on Osmo Pocket 3

Interface for selecting Smart Gimbal Mode.

Diagrams illustrating SpinShot mode rotations

Visual explanation of 90° and 180° SpinShot rotations.

Transferring Files

Transferring Files to a Phone

Connect Osmo Pocket 3 to DJI Mimo, tap the Playback icon to preview photos and videos. Click to download files, which can then be shared directly from DJI Mimo to social media platforms.

Transferring Files to a Computer

Power on Osmo Pocket 3 and connect it to a computer using a USB-C cable. A pop-up will appear on the camera. Tap "Transfer File/OTG Connection" to download files. The camera cannot record during file transfer. Select "Cancel" to only charge the device.

Diagram showing file transfer from Osmo Pocket 3 to a computer

Illustration of connecting the Osmo Pocket 3 to a computer for file transfer.

OTG Connection for Transferring Files (Android)

For Android devices supporting OTG, files can be transferred directly. Connect the camera to the Android device with the Type-C to Type-C PD cable (included). View and transfer photos/videos via the device album or file management.

If the camera doesn't automatically recognize the Android device, swipe down from the top of the screen, enter the control menu, tap Settings > OTG Connection, and then connect the camera with the Type-C to Type-C PD cable.

Webcam Mode

Osmo Pocket 3 can function as a webcam. Power on the device and connect it to a computer via a USB cable. The device will enter USB mode. Tap "Webcam" on the screen to activate Webcam mode. The shutter/record button can be used to start recording. Swipe left from the right edge to view parameters like Exposure, White Balance, and Focus Mode. Recorded videos can be previewed after exiting Webcam mode.

Microphone Connection

Osmo Pocket 3 can connect to external microphones, including DJI Mic, DJI Mic 2, or third-party digital USB-C microphones supporting 48K/16bit.

DJI Mic 2 Transmitter Overview

Diagram of the DJI Mic 2 Transmitter

Detailed view of the DJI Mic 2 Transmitter components.

  1. Recording Status LED
  2. Data Port (USB-C)
  3. Record Button
  4. 3.5mm TRS Input
  5. System Status LED
  6. Linking Button
  7. Power Button

DJI Mic 2 Transmitter Status LEDs

Diagram of DJI Mic 2 Transmitter Status LEDs

Visual guide to the DJI Mic 2 Transmitter's LED indicators.

Blinking PatternDescriptions
Recording Status LED
Solid redThe transmitter is recording independently.
Pulses redThe transmitter has been muted.
OffThe transmitter is not recording independently.
System Status LED
Linking Status with DJI Mic 2 Receiver
Solid greenLinked with the receiver
Blinks green slowlyNot linked with the receiver
Blinks green quicklyLinking
Linking Status via Bluetooth
Solid blueLinked with a Bluetooth device
Blinks blue slowlyNo Bluetooth device linked
Blinks blue quicklyLinking
Noise reduction
Solid yellowNoise reduction is enabled when linked to DJI Mic 2 receiver or other Bluetooth devices.
Blinks yellowNoise reduction is enabled when not linked to DJI Mic 2 receiver or other Bluetooth devices.
Battery Level Descriptions
Solid red0-10%
Battery Level During Charging
Blinks green slowly0-25%
Blinks green twice26-50%
Blinks green three times51-75%
Blinks green four times76-100%
OffFully charged
Firmware Update
Blinks red and green alternatelyFirmware updating

DJI Mic 2 Transmitter Connection

To connect to the DJI Mic 2 Transmitter:

  1. Swipe down from the top of the screen on Osmo Pocket 3, enter the control menu, tap the settings icon, and select Wireless Mic > TX1/TX2. The camera is now ready to link.
  2. Press and hold the power button of the transmitter for two seconds to power it on.
  3. Ensure the transmitter is in Bluetooth linking mode. If the system status indicator is green, press and hold the record button for three seconds to switch to Bluetooth linking mode.
  4. Press and hold the linking button of the transmitter for two seconds. The transmitter will search for nearby Bluetooth devices, and its system status indicator will blink blue quickly.
  5. Once successfully linked, the transmitter's system status indicator will be solid blue. The screen will show connection status. Press the linking button on the transmitter to start/stop recording while using it for audio.
Diagram showing connection process for DJI Mic 2 Transmitter

Steps to connect the DJI Mic 2 Transmitter to the Osmo Pocket 3.

  • If Osmo Pocket 3 and DJI Mic 2 Transmitter were purchased as a combo, they are linked automatically when powered on.
  • Osmo Pocket 3 can link with up to two DJI Mic 2 transmitters simultaneously.
  • For more detailed information, refer to the User Manual of DJI Mic 2.

Connecting to DJI Mic

To connect the DJI Mic to the camera:

  1. Power on the DJI Mic receiver and transmitter, ensuring they are linked.
  2. Use the USB-C mobile phone adapter (included) to connect the receiver to the USB-C port on the camera. An input volume bar will display on the touchscreen.
  3. Press the linking button on the transmitter to start recording. Press it again to stop recording.
Diagram showing connection process for DJI Mic

Steps to connect the DJI Mic to the Osmo Pocket 3.

If the transmitter and receiver are disconnected, you can link them by placing them in the charging case or by manually linking them through the receiver's screen settings (Settings > Link Device).

DJI Mimo App

The DJI Mimo app allows you to monitor the current camera view, set camera parameters, and control the camera with a mobile device. It also provides functions for transferring, editing, and sharing files, and Wi-Fi livestreaming.

DJI Mimo App Home Screen

Launch DJI Mimo to access the home screen.

Screenshot of the DJI Mimo App home screen

The main interface of the DJI Mimo App.

Tap "Device" to connect to Osmo Pocket 3. Once connected, DJI Mimo enters the camera view.

Maintenance

Firmware Update

Use DJI Mimo to update the device's firmware. Ensure the battery level is above 15% before updating. Connect the device to DJI Mimo. If new firmware is available, DJI Mimo will prompt you. Tap the prompt and follow the on-screen instructions. The update typically takes about 2 minutes.

Storing

The Osmo Pocket 3 can be stored in the Osmo Pocket 3 Protective Cover or the Osmo Pocket 3 Carrying Bag.

Using the Osmo Pocket 3 Protective Cover

Power off the handheld gimbal camera. Store it in the protective cover with the touchscreen facing downward, as shown in the illustration. It is not necessary to detach the handle. The protective cover has dedicated storage locations for the Osmo Pocket 3 Black Mist Filter, Wide-Angle Lens, and DJI Mic 2 Transmitter.

Diagram showing how to store Osmo Pocket 3 in its protective cover

Illustration of storing the Osmo Pocket 3 in its protective cover.

Using the Osmo Pocket 3 Carrying Bag

Power off the gimbal camera and store the devices in the carrying bag as shown. The carrying bag is specifically designed to store the Osmo Pocket 3 Creator Combo and all its accessories.

Diagram showing how to store Osmo Pocket 3 and accessories in the carrying bag

Illustration of storing the Osmo Pocket 3 and its accessories in the carrying bag.

Usage Notices

  • Handle with care; intricate components can be damaged by impact. Keep the product away from sand and dust.
  • Ensure nothing obstructs the gimbal when powered on.
  • Avoid frequent manual adjustment of the axis lock to prevent malfunction.
  • The handheld gimbal camera is not water resistant. Do not spill liquids on it or use liquid cleansers. Use a soft dry cloth for cleaning.
  • Do not cover or touch the ventilation area; the camera may become hot during use and stop shooting if overheating occurs.
  • Avoid using the device in environments with high-amplitude vibrations (e.g., mounted on a motorcycle handlebar) to prevent damage to the camera system and gimbal.
  • Slight friction between the screen frame and body during screen rotation is normal.
  • Do not expose the camera lens to laser beams to avoid damaging the camera sensor.

Troubleshooting

  • Firmware Update Failed: If the firmware update fails, attach the battery handle to the camera and try again. Ensure the battery level is above 15% before updating.
  • Battery Handle Temperature Issues: If the battery handle cannot be used due to excessively high or low temperatures, wait for the temperature to return to normal before use.
  • DJI Mimo Connection Issues: If you encounter problems connecting to DJI Mimo, ensure both Wi-Fi and Bluetooth are enabled on your mobile device, and that DJI Mimo is updated to the latest firmware. If issues persist, swipe down from the top of the camera screen, enter the control menu, tap Settings > Wireless Connection > Reset Connection. This will reset all connections and Wi-Fi passwords.
  • Gimbal Drift: If you notice gimbal drift, perform a gimbal calibration. Do not hold the gimbal camera during calibration; place it on a stable and flat surface.
  • MicroSD Card Not Recognized/Full: Ensure the microSD card is properly inserted and is a UHS-I Speed Grade 3 card. If the card is full, transfer files to a computer or phone and format the card (remember to back up data first).

Specifications

For detailed specifications, please visit the official DJI website: https://www.dji.com/osmo-pocket-3/specs

Key Specifications

AttributeValue
Size139.7mm*42.2mm*33.5mm
Weight179 g
Number of Axes3-Axis
Panning Angle-235° to 58°
Rolling Angle-45° to 45°
Titling Angle-120° to 70°
CommunicationWiFi, Bluetooth
Battery IncludedYes
Support Remote ControlYes
Vertical ShootingYes
App SettingYes
Camera IntegrationYes
Charging for Mobile DeviceNo
FeatureSmile Snapshot, Following the shooting mode, Face Recognition
CertificationCE, FCC

Warranty & Support

This content is subject to change. For the most up-to-date information, please refer to the official DJI resources.

You can download the latest user manual and other documents from the official DJI website: https://www.dji.com/osmo-pocket-3/downloads

If you have any questions about this document or your product, please contact DJI Support by sending a message to DocSupport@dji.com.

DJI and OSMO are trademarks of DJI. Copyright © 2024 DJI OSMO All Rights Reserved.

User Tips

  • Inspect Packaging: Although the product itself may be fine, it's always a good practice to inspect the packaging upon arrival for any signs of damage.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.