1. Introduction
Thank you for choosing the Hippcron 7-inch Wireless Carplay Android Auto Car Radio Stereo Multimedia Player. This manual provides essential information for the safe and efficient use of your device, including installation, operation, maintenance, and troubleshooting.
Please read this manual thoroughly before using the product and keep it for future reference. This product is constantly being updated; interfaces and accessory styles are for reference only. The actual product shall be subject to the physical item you receive.
2. Safety Information and Warnings
General Precautions
- Carefully read all instructions before installation and operation.
- Plan the optimal location for the device before fixing it in your vehicle.
- When connecting the camera, ensure correct body identification.
- Regularly clean up storage space for optimal speed and security of file storage.
- Product structure and parameters may be improved without notice. Refer to the actual product if any discrepancies exist in this manual.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
If this device causes harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits for uncontrolled environments. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Trademark Disclaimer
- Android Auto and the Google Play logo are trademarks of Google Inc.
- Apple, Apple CarPlay, and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
- Use of the Apple CarPlay logo signifies that a vehicle user interface meets Apple performance standards. Apple is not responsible for the operation of this vehicle or its compliance with safety and regulatory standards.
3. Setup
3.1. Package Contents
Please check the package for the following items:
- Hippcron 7-inch Multimedia Player
- Mounting Bracket (style may vary)
- Cigarette Lighter Power Plug
- AUX Cable (for supported models)
- User Manual
- Optional: Reverse Camera (if purchased with the 'Screen With Cam' variant)
3.2. Installation Method
The device comes with a mounting bracket. Two common installation methods are available:
Method 1: Glass Suction Cup Type Suspension Installation
This method allows you to mount the device on your windshield or dashboard using a suction cup for an elevated view.
Method 2: Desktop Horizontal Installation
This method uses a base for horizontal placement on your dashboard, providing a stable, lower profile setup.
The specific bracket style may vary. Connect the bracket to the host unit securely.
3.3. Power Connection
This device is powered by the cigarette lighter power plug.
- After installing the device, insert the power plug into your vehicle's cigarette lighter socket.
- The device will power on and be ready for use.
Important Note:
- Power Supply Voltage: 12V~30V DC.
- Always use the standard cigarette lighter charger provided. If using a third-party charger, ensure it is a high-quality charger that meets safety standards.
- Using an incompatible or low-quality charger may damage the device, cause overheating, or impair functions like FM transmission.
3.4. Reverse Camera Connection (Optional)
If your device includes or you have purchased a compatible reverse camera, follow these steps:
- Connect the reverse camera to the device's 'Camera input' port using the RCA adapter cable.
- Identify the yellow line on the extension cable as the video signal line from the rearview camera.
- Connect the red short line at the end of the extension cable (the reversing trigger line) to the positive power line of your vehicle's reverse light.
- Connect the camera's negative wire to a suitable ground point.
When a signal is detected from the reverse camera (i.e., when you engage reverse gear), the LCD will automatically switch to display the camera image.

Image: Reverse camera view on the screen with parking guidelines, and a wiring diagram showing connections to the reverse light (positive, negative) and the camera.
Safety Warning:
- Do not intentionally activate the rearview camera display while driving normally, as this can be a distraction.
4. Operating Instructions
4.1. Device Overview and Ports

Image: Side view of the device highlighting connection ports: AUX in, Camera input, USB port, Micro TF slot, DC 12V port, with dimensions (177mm x 108mm x 26mm).
| Port | Function |
|---|---|
| AV IN (CAM IN) | Video input interface for connecting the reversing camera via a 2.5mm plug to RCA cable. |
| USB Port | Connect USB devices for music, video, pictures. Supports MirrorLink, CarPlay, or Android Auto. (Some models may not have a USB interface or may support Type-C). |
| TF Card Slot | Insert TF card for music, video, and picture playback (supported by some models). |
| AUX Out | Output audio to other audio equipment via a 3.5mm AUX cable (supported by some models). |
| IR | Remote control signal receiver (only some models include a remote control). |
| DC IN | 3.5mm power cord plug (some models use a Type-C power plug). |
| MIC IN | 3.5mm microphone jack for external lavalier microphone (supported by some models). |
| V-OUT | Output video signal to other monitor devices via a 3.5mm AUX cable (supported by some models). |
| POWER | Power button to turn the device on/off (supported by some models). |
4.2. Bluetooth Pairing Connection
Bluetooth allows for music streaming and hands-free calls. For wireless CarPlay/Android Auto, Bluetooth pairing is required first.
- Tap the Settings icon on the device screen to enter the settings page.
- Tap the BT icon to enter the Bluetooth connection page.
- On your phone, search for the device's Bluetooth name (e.g.,