1. Introduction
The EC100 (SLM) Automatic Door Control Panel is a versatile and user-friendly device designed for managing automatic door operations. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your control panel.
2. Product Overview
The EC100 (SLM) control panel features an intuitive interface with various indicators and buttons for comprehensive control over your automatic door system. Its compact design allows for easy integration into various environments.
Figure 2.1: Front view of the EC100 (SLM) control panel, showing indicators and buttons.
Figure 2.2: Angled front view of the EC100 (SLM) control panel.
2.1. Front Panel Components
- Mode Indicators: Icons for manual operation (hand), door direction (arrows), and locking status (lock/key).
- Status/Programming LEDs: Indicators labeled '32 Reset', '16 Vo', '8 Vc', '4 s', '2 to', '1 tn' for displaying operational status or programming values.
- ERROR Indicator: Illuminates to signal a system fault.
- Adjustment Buttons: '-' (Minus/Down) and '+' (Plus/Up) buttons for parameter adjustment and menu navigation.
2.2. Rear Panel Overview
The rear panel houses the circuit board and connection terminals for integrating the control panel with your automatic door system.
Figure 2.3: Rear view of the EC100 (SLM) control panel, exposing the circuit board and connection points.
3. Specifications
| Feature | Specification |
|---|---|
| Model | EC100 (SLM) |
| Fixed Type | Magnetic Fastener |
| Use | Window (as per product data) |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 12 cm |
| Package Width | 12 cm |
| Package Height | 6 cm |
| Package Weight | 1.0 kg |
4. Setup
4.1. Mounting the Control Panel
- Choose a suitable location for the control panel, ensuring it is easily accessible and protected from environmental elements.
- Use the magnetic fastener mechanism to securely attach the control panel to the desired surface. Ensure the surface is clean and provides adequate magnetic adhesion.
4.2. Wiring Connections
Warning: All wiring should be performed by a qualified technician to prevent electrical shock or damage to the device. Ensure power is disconnected before making any connections.
- Refer to the wiring diagram provided with your automatic door system for specific connection points.
- Connect the necessary power and signal cables to the terminals on the rear circuit board of the EC100 (SLM) control panel. The rear view (Figure 2.3) shows typical connection points.
- Ensure all connections are secure and properly insulated.
5. Operating Instructions
5.1. Basic Operation
- Power On: Once properly installed and wired, apply power to the system. The control panel indicators may briefly illuminate during startup.
- Mode Selection: Use the arrow icons to select the desired door operation mode (e.g., open, close, automatic, one-way traffic). The illuminated arrow(s) will indicate the active mode.
- Manual Mode: The hand icon typically indicates a manual or hold-open mode. Pressing the corresponding button (if available) or cycling through modes may activate this.
- Lock/Unlock: The lock/key icon indicates the door's locking status. Use the associated control to lock or unlock the door.
5.2. Programming and Adjustments
The '+' and '-' buttons, along with the numeric/alphanumeric LEDs, are used for programming and fine-tuning parameters such as:
- Door Speed: Adjust opening and closing speeds.
- Hold Open Time: Set the duration the door remains open. The 's' (seconds) and 'to' (time open) indicators may be used here.
- Sensitivity: For motion sensors or safety beams.
- Reset: The 'Reset' indicator, often accompanied by '32', suggests a factory reset or specific parameter reset function. Consult your system's full programming guide for detailed steps.
6. Maintenance
Regular maintenance ensures the longevity and reliable operation of your EC100 (SLM) control panel.
- Cleaning: Gently wipe the control panel surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
- Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage.
- Environmental Protection: Ensure the control panel is not exposed to excessive moisture, dust, or extreme temperatures, which can affect its performance.
7. Troubleshooting
If you encounter issues with your EC100 (SLM) control panel, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| ERROR indicator is lit | System fault, sensor obstruction, or wiring issue. | Check for obstructions in the door path. Inspect all wiring connections. Power cycle the system. If the error persists, consult a technician. |
| Door not responding to commands | No power, loose connections, or incorrect mode selection. | Verify power supply. Check wiring. Ensure the correct operating mode is selected on the control panel. |
| Door opens/closes too slowly/quickly | Speed parameters are incorrectly set. | Use the '+' and '-' buttons to adjust the door speed settings as per the programming instructions. |
| Door does not lock/unlock | Lock mechanism fault or incorrect lock setting. | Check the physical lock mechanism. Verify the lock/key indicator status and adjust settings if necessary. |
8. User Tips
- Regular Testing: Periodically test all door functions, including safety sensors, to ensure proper operation.
- Keep Clean: A clean control panel and sensors can prevent false readings and extend product life.
- Consult Full System Manual: For advanced programming or specific system integrations, always refer to the comprehensive manual for your entire automatic door system.
9. Warranty and Support
For any issues not covered in this manual, or for technical assistance, please contact the seller or a certified service technician. Keep your purchase records for warranty claims.