1. Introduction
Thank you for choosing the Aramox Wifi Smart Thermostat. This device is designed to provide intelligent temperature control for your home, offering convenience through smartphone app remote control, voice command integration, and flexible programming options. Please read this manual carefully before installation and use to ensure proper operation and safety.
Figure 1: Aramox Wifi Smart Thermostat
2. Safety Information
WARNING: Please read all safety instructions before use. Failure to follow these instructions may result in product damage or personal injury.
- Fire Risk: Mind potential fire risk and strictly follow the instruction manual for installation and operation.
- Protective Equipment: While installing or using the product, wear appropriate protective equipment and fully comply with applicable laws and regulations.
- Children Safety: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
- Intended Use: Do not use this product for purposes other than its intended use.
- Inspection: Inspect the product before each use; do not use if damaged.
- Installation: Follow installation and operation guidelines to avoid injury. Professional installation is recommended.
- Environmental Exposure: Do not expose to water or moisture.
- Handling: Handle with care to avoid cuts or injuries.
3. Package Contents
Please check the box for the following items:
- 1 x Wifi Smart Thermostat
- 2 x Mounting Screws
- 1 x User Manual (English)
- (Depending on the specific model purchased, additional accessories such as a Wall Plate or Sensor Cable may be included.)
4. Setup
4.1. Installation
The thermostat is designed for wall mounting and is compatible with 86 x 86mm square or European 60mm round installation boxes. Due to the electrical nature of this device, professional installation by a qualified electrician is highly recommended to ensure safety and compliance with local electrical codes.
- Power Off: Before starting any installation, ensure that the main power supply to your heating/cooling system is turned OFF at the circuit breaker.
- Mounting: Follow the specific wiring diagrams provided with your heating/cooling system and the thermostat's internal wiring terminals. Secure the thermostat base to the wall box using the provided screws.
- Wiring: Connect the thermostat wires to your HVAC system according to the wiring diagram. Ensure all connections are secure.
- Attach Thermostat: Carefully attach the thermostat display unit to its base.
- Power On: Restore power to your heating/cooling system at the circuit breaker.
4.2. First Use
- Remove all protective films from the device screen and body.
4.3. Smartphone App Setup (Smartlife)
To utilize the smart features of your thermostat, you need to connect it to the Smartlife application:
- Download App: Download the