1. Safety Instructions
Please read this manual carefully before using the product and keep it properly for future reference.
- This machine is for indoor use only.
- This product should not be used by individuals with physical, sensory, or intellectual disabilities, or those without relevant experience and knowledge (including children), unless under the supervision or guidance of a guardian to ensure safe use.
- If the power cord is damaged, it must be replaced by the manufacturer, its maintenance department, or similar professional personnel to avoid danger.
- Always unplug the power cord when filling water and cleaning.
- Do not tilt the humidifier, otherwise it may cause water level errors or even water overflow. Ensure it is placed stably during use.
- Do not pull the power cord. Always disconnect the power before performing maintenance or moving the humidifier.
- Do not plug or unplug the power cord with wet hands to avoid electric shock.
- Do not disassemble, repair, or modify this product without authorization.
- When powering on, do not touch the atomizer with your hand, otherwise it may cause a tingling sensation.
- If abnormal phenomena (e.g., abnormal noise, odor, or overheating) occur during product use, immediately unplug the power and contact after-sales service.
- Do not separate the water tank and base during operation, and do not touch the water and components in the water trough.
- Unplug the power cord during thunderstorms or when not in use for a long time.
- Do not turn the machine upside down when it is powered on and contains water, to avoid electric shock and damage to internal electronic components.
- Except for the essential oil box, do not add essential oils to any other part of the humidifier, otherwise it may cause damage.
2. Product Overview
Familiarize yourself with the components of your Mijia Humidifier 3.
Figure 1: Humidifier highlighting 99.9% Silver Ion Antibacterial feature.
Figure 2: Top view showing the double spray port mist maker and 360° rotatable outer ring.
Figure 3: Internal view showing the 4.5L large capacity water tank.
Figure 4: Front view of the humidifier.
Component Names:
Figure 5: Diagram of humidifier components.
- Inner Mist Outlet
- Outer Mist Outlet
- Water Tank Cover
- Water Level Window
- Water Tank
- Essential Oil Box
- UV-C Sterilization Lamp Cover
- Gear Indicator Lights
- Gear Switch Button
- Power Button
- Wi-Fi Indicator Light
- Power Cord
- Base
- Bottom Cover
- Filter Screen Cover (contains filter sponge)
- Float Board
- Atomizer
- Water Trough
- Float
3. Setup
Initial Preparation:
- Before first use, remove the foam fixing the float in the base.
- When using the humidifier for the first time in a new environment, please place it at room temperature for 30 minutes to prevent damage to the water tank caused by sudden temperature changes.
- Ensure the product is placed on a stable, flat surface. Do not place it directly on a wooden surface to avoid moisture damage and deformation.
- Keep at least 0.5 meters away from paper documents, home appliances, electronic products, furniture, power sockets, and other important items to avoid moisture damage.
- Place away from heat sources and avoid direct sunlight.
- Do not place on blankets or towels during use to avoid blocking the air inlet and wetting the desktop.
Adding Water:
The humidifier supports multiple convenient ways to add water:
- Top-Fill Method 1: Add water from the concave part of the water tank cover with a cup, filling the water tank up to the maximum water level.
- Top-Fill Method 2: Place the water tank on a flat table, open the water tank cover, and add water directly. Then align the water level window with the power button and install the water tank on the base.
- Direct Pour Method: Without removing the water tank, open the water tank cover and pour water directly into the tank.
Important:
- When adding water, ensure the water tank and base are placed stably.
- Avoid pouring water into the mist outlet to prevent leakage.
- Do not inject hot water above 40°C into the water tank.
- Do not allow water to enter through the mist outlet.
Figure 6: Various methods for adding water to the humidifier.
Adding Essential Oils:
- Drip an appropriate amount of essential oil (to be purchased separately) onto the fiber cotton in the essential oil box.
- Put the essential oil box back into its designated slot.
Note:
- Only add essential oils to the essential oil box. Do not add essential oils to any other part of the humidifier, otherwise it may cause damage.
Power Connection:
- Connect the power plug into a power socket that meets product requirements (220V).
- After connecting to power, you will hear a "beep" sound, and the humidifier will enter standby mode.
- The product comes with an adapter suitable for your region (e.g., EU, UK, AU adapter).
Figure 7: Examples of international plug adapters.
4. Operating Instructions
Power On/Off:
- Short press the power button to turn the humidifier on or off.
- When first powered on, it defaults to Gear 1 operation.
Switching Humidification Gears:
- Short press the gear switch button to cycle through Gear 1, Gear 2, Gear 3, and Constant Humidity mode.
- The corresponding gear indicator light will be white.
- Next time it is powered on, it defaults to the gear it was in when powered off.
Constant Humidity Mode (Recommended):
- Defaults to maintaining 60%RH.
- If the current humidity does not reach 60%RH, the humidifier will mist at Gear 3.
- When the ambient humidity reaches 60%RH, the humidifier automatically switches to Gear 1 misting.
- The gear indicator light will always be on for constant humidity mode.
- Note: This function can be enabled in the Mi Home APP.
UV Sterilization Function:
- The humidifier has a built-in UV-C sterilization lamp, which turns on synchronously with the humidifier.
- After the humidifier is turned off, the UV-C sterilization lamp turns off after a 2-minute delay.
Wi-Fi Connectivity:
- If not connected to the network and Wi-Fi has not been reset, Wi-Fi is enabled by default when powered on.
- Reset Wi-Fi: Long press the gear switch button for 7 seconds. The Wi-Fi indicator light will flash orange, indicating a successful Wi-Fi reset.
- Note: Within 30 minutes of successful Wi-Fi reset, if connected to the network, the Wi-Fi indicator light will be blue for 3 minutes and then turn off. If not connected to the network within 30 minutes, the Wi-Fi function will be turned off and needs to be re-enabled by resetting Wi-Fi.
Over-Humidity Protection:
- When operating at Gear 2 or 3, if the humidifier detects that the ambient humidity reaches 85%RH, it automatically switches to Gear 1 humidification.
- If the humidity reaches 85%RH or above for more than 30 minutes, the humidifier automatically shuts down.
- Note: This function is off by default and can be enabled in the Mi Home APP.
Mist Direction Adjustment:
- The outer ring of the mist outlet can rotate 360°, allowing for free adjustment of the humidification direction.
Figure 8: Adjusting the mist outlet direction.
5. Maintenance
General Cleaning:
- Always unplug the power cord before cleaning.
- If there is water at the bottom of the humidifier, wipe it dry with a dry cloth to avoid damaging the machine.
- The 185mm large-diameter water tank is easily disassembled for deep cleaning of its inner wall.
Figure 9: Cleaning the water tank.
Water Tank Care:
- Do not inject hot water above 40°C into the water tank.
- Do not allow water to enter through the mist outlet.
- When the ambient temperature is below 0°C, please pour out the water in the water tank to prevent freezing and damage to the machine.
- Do not put metal objects, chemicals, or detergents into the water tank, otherwise it may cause machine damage and air quality deterioration.
- When pouring out water from the water tank, please turn off the power first and unplug the power cord.
- When the water tank is placed separately, the stored water must be emptied.
6. Troubleshooting
| Problem | Indicator Light Status | Solution |
|---|---|---|
| Normal Operation | Corresponding gear indicator light is white. | No action required. |
| Water Shortage | 4 indicator lights are red for 30 seconds, then turn off. Buzzer emits "beep, beep, beep" sound. | Refill the water tank and short press the power button to restart. |
| Water Tank Lifted (Body Separation) | 4 indicator lights are red. Buzzer emits "beep, beep, beep" sound. | Place the water tank back correctly. Indicator lights will turn off, and the humidifier will enter standby mode. Short press the power button to restart. |
| Abnormal noise, odor, or overheating | N/A | Immediately unplug the power and contact after-sales service. |
7. Specifications
| Parameter | Value |
|---|---|
| Product Name | Humidifier |
| Product Model | MJJSQ05DY |
| Rated Voltage | 220V~ |
| Rated Frequency | 50Hz |
| Rated Power | 28W |
| Humidification Capacity | 350mL/h |
| Noise Level | ≤38dB(A) |
| Water Tank Capacity | 4.5L |
| Product Net Weight | 1.57kg |
| Product Dimensions | Φ190 × 335mm |
| Wireless Connection | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 |
| Executive Standard | GB 4706.1-2005, GB 4706.48-2009, GB 4343.1-2018, GB 17625.1-2022 |
| Package Length | 36 cm |
| Package Width | 24 cm |
| Package Height | 23 cm |
| Package Weight | 1.88 kg |
8. User Tips
- Quiet Operation: Utilize the low noise (34dB(A)) and light-off features for undisturbed sleep, especially in bedrooms or nurseries.
- Healthy Humidification: The silver ion antibacterial water tank helps suppress bacterial growth, ensuring healthier mist.
- Convenient Refills: Take advantage of the easy top-fill design, allowing you to add water without opening the lid or moving the unit, making refills quick and calm.
- Smart Control: For enhanced convenience and advanced settings, connect and control your humidifier using the Mi Home app.
- Optimal Placement: To prevent wetting surfaces, consider enabling the over-humidity protection feature in the app and ensure the humidifier is placed on a stable, water-resistant surface.
9. Warranty and Support
- The environmental protection use period for this product is 10 years.
- The product, accessories, user interface, and other illustrations in this manual are schematic diagrams for reference only. Due to product updates and upgrades, the actual product may differ slightly from the schematic diagrams. Please refer to the actual product.
- If the power cord is damaged, it must be replaced by the manufacturer, its maintenance department, or similar professional personnel to avoid danger.
- For further assistance or to view the official user manual in PDF format, please refer to the document available at: Official User Manual (PDF).