SHIMANO R8070, R9170

Contents

Shimano Ultegra R8070 & Dura-Ace R9170 Hydraulic Disc Brake Caliper User Manual

Flat Mount Road Bike Front & Rear Brake

1. Introduction

This manual provides essential information for the safe and effective use of your Shimano Ultegra BR-R8070 and Dura-Ace BR-R9170 flat mount hydraulic disc brake calipers. Please read this manual thoroughly before installation and use, and keep it for future reference. For detailed technical installation procedures, always refer to the official Shimano dealer manuals or consult a qualified bicycle mechanic.

2. Safety Information

WARNING: Failure to follow these safety instructions could result in serious injury or death.

  • Professional Installation Recommended: Bicycle brake systems are critical safety components. Incorrect installation, adjustment, or maintenance can lead to brake failure, resulting in serious injury. Always have your brakes installed and serviced by a qualified bicycle mechanic.
  • Brake Fluid: These brakes use mineral oil. Do not use DOT fluid, as it will damage the system.
  • Brake Pads: Use only genuine Shimano brake pads or compatible replacements designed for hydraulic disc brakes.
  • Rotor Compatibility: Ensure your rotors are compatible with hydraulic disc brakes and are of the correct diameter for your caliper and frame/fork.
  • Brake Bedding-In: New brake pads and rotors require a bedding-in period to achieve full braking power. Perform this process in a safe, controlled environment.
  • Brake Fade: Prolonged or continuous braking, especially on long descents, can cause brake fade due to overheating. Use proper braking techniques to manage heat.
  • Rotor and Caliper Heat: Rotors and calipers can become extremely hot during use. Avoid touching them immediately after riding to prevent burns.
  • Regular Inspection: Before each ride, check that the brakes operate correctly, levers feel firm, and there are no fluid leaks. Inspect brake pads for wear and rotors for damage.

3. Product Overview

The Shimano Ultegra BR-R8070 and Dura-Ace BR-R9170 are high-performance hydraulic disc brake calipers designed for road bicycles. They feature a flat mount design for a sleek, integrated appearance and efficient braking.

Shimano BR-R9170 and BR-R8070 Calipers

Figure 1: Overview of Shimano BR-R9170 and BR-R8070 hydraulic disc brake calipers.

Available Models:

  • BR-R8070 (Ultegra): Front and Rear calipers.
  • BR-R9170 (Dura-Ace): Front and Rear calipers.
Shimano BR-R8070 Front Caliper

Figure 2: Shimano BR-R8070 Front caliper. Compatible with Ø140mm or Ø160mm rotors, for 160/180 mount.

Shimano BR-R8070 Rear Caliper

Figure 3: Shimano BR-R8070 Rear caliper.

Shimano BR-R9170 Front Caliper

Figure 4: Shimano BR-R9170 Front caliper. Compatible with Ø160mm or Ø180mm rotors.

Shimano BR-R9170 Rear Caliper

Figure 5: Shimano BR-R9170 Rear caliper.

4. Setup and Installation

Installation of hydraulic disc brakes requires specialized tools and knowledge. It is strongly recommended that installation be performed by a professional bicycle mechanic.

  • Mounting Type: These calipers are designed for flat mount frames and forks.
  • Rotor Size Compatibility:
    • BR-R8070 Front: For Ø140mm or Ø160mm rotors (requires appropriate adapter for 160/180 mount).
    • BR-R8070 Rear: Typically for Ø140mm or Ø160mm rotors (check frame specifications).
    • BR-R9170 Front: For Ø160mm or Ø180mm rotors (requires appropriate adapter).
    • BR-R9170 Rear: Typically for Ø140mm or Ø160mm rotors (check frame specifications).
  • Brake Hose Routing: Ensure brake hoses are routed correctly and securely, without kinks or interference with moving parts.
  • Brake Bleeding: After installation, the hydraulic system must be properly bled to remove any air and ensure optimal performance. This procedure requires specific Shimano bleeding tools and mineral oil.
  • Pad Installation: Install brake pads correctly, ensuring the spring clip is properly seated.

For detailed, step-by-step installation instructions, refer to the official Shimano technical service instructions (dealer manuals) for the BR-R8070 and BR-R9170 models.

5. Operating Instructions

  • Brake Lever Feel: Your brake levers should feel firm and consistent. If they feel spongy or pull to the handlebar, the system may need bleeding or inspection.
  • Braking Technique: Apply both front and rear brakes smoothly and progressively. Avoid sudden, hard braking, especially with the front brake, which can cause loss of control.
  • Wet Conditions: Braking performance may be reduced in wet conditions. Allow for longer stopping distances.
  • Bedding-In New Brakes: New pads and rotors need to be bedded in. Ride at a moderate speed and apply the brakes firmly (but not to a complete stop) about 20-30 times. This process transfers pad material to the rotor, improving braking power and reducing noise.

6. Maintenance

Regular maintenance is crucial for the safety and performance of your hydraulic disc brakes.

  • Daily Checks: Before each ride, check brake lever function, ensure no fluid leaks, and visually inspect pads and rotors.
  • Pad Wear: Check brake pads regularly for wear. Replace pads when the friction material is worn down to 0.5mm or less, or if they are contaminated with oil or grease.
  • Rotor Inspection: Inspect rotors for wear, damage, or warping. Replace rotors if they are below their minimum thickness (usually marked on the rotor) or if they are severely damaged.
  • Cleaning: Keep calipers and rotors clean. Use disc brake cleaner or isopropyl alcohol to clean rotors. Avoid getting oil, grease, or cleaning agents on the brake pads.
  • Brake Fluid Replacement/Bleeding: Shimano recommends replacing brake fluid and bleeding the system periodically (e.g., annually or as needed) to maintain optimal performance. This should be done by a qualified mechanic.
  • Bolt Torque: Ensure all mounting bolts are tightened to the manufacturer's specified torque settings.

7. Troubleshooting

SymptomPossible CauseSolution
Squealing/Noisy BrakesContaminated pads/rotor, worn pads, misaligned caliper, loose bolts, new pads not bedded in.Clean rotor with disc brake cleaner, replace contaminated pads, check pad wear, align caliper, ensure bolts are torqued, bed in new pads.
Spongy Brake LeverAir in the hydraulic system, worn pads, low fluid level.Bleed the brake system, replace worn pads, check for fluid leaks.
Poor Braking PowerContaminated pads/rotor, worn pads, air in system, improper bedding-in, warped rotor.Replace contaminated/worn pads, clean rotor, bleed system, re-bed pads, replace warped rotor.
Brake RubbingMisaligned caliper, warped rotor, sticky caliper piston.Re-align caliper, true or replace warped rotor, clean and lubricate pistons (professional service).

If you cannot resolve an issue, consult a qualified bicycle mechanic.

8. Specifications

FeatureSpecification
BrandSHIMANO
Model NumbersBR-R8070 (Ultegra), BR-R9170 (Dura-Ace)
TypeHydraulic Disc Brake Caliper
Mount TypeFlat Mount
UseRoad Bicycles
MaterialAluminum
Braking SystemHydraulic Disc Brake (Hydraulic Brake Pad)
ComponentsCaliper Brake
OriginJapan (Jp)
Approx. Weight (per caliper)130.8g (Dura-Ace front caliper example)
Shimano Dura-Ace Caliper Weight

Figure 6: Example weight of a Dura-Ace caliper (130.8g).

9. User Tips

  • Authenticity: Many users confirm these calipers are genuine Shimano products, often arriving in original Shimano packaging.
  • Quantity Check: When purchasing, carefully check the product options to confirm if you are ordering a single caliper (front or rear) or a pair.
  • Professional Setup: Even experienced home mechanics often recommend professional setup for hydraulic disc brakes to ensure optimal safety and performance.

10. Warranty and Support

Your Shimano hydraulic disc brake calipers are covered by Shimano's manufacturer warranty. For warranty claims, please contact your original place of purchase or an authorized Shimano dealer.

For the most up-to-date technical information, detailed installation guides, and support, please visit the official Shimano website or consult an authorized Shimano service center.

A general item guide document is available for reference: User Manual (PDF). Please note that this PDF may be a general Shimano component guide; always refer to specific BR-R8070/BR-R9170 manuals from Shimano for precise instructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.