1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JMQWE 4K Plug And Play Car Wifi DVR Video Recorder Dash Camera. Designed for seamless integration, this dash camera offers high-resolution video recording, night vision capabilities, and Wi-Fi connectivity for easy access via your smartphone. Please read this manual carefully before installation and use to ensure optimal performance and safety.
This dash camera is compatible with Haval H9 models from 2015 to 2022.
Figure 1: A black Haval H9 SUV, illustrating the compatible vehicle type.
2. Product Overview
2.1. Product Structure and Key Description
The dash camera features a compact design for discreet installation. Key components and their functions are outlined below:
- Reset hole: Used to restart the device if it crashes.
- LED indicator: Displays device status (Red for Wi-Fi, Blue for recording).
- Recording/MIC: Microphone for audio recording.
- Camera button: Short press to pause recording, long press (3s) to power off. In menu, short press to confirm. With Wi-Fi, short press to cancel.
- Photo button: Short press to take photos, long press (5s) to restore factory settings.
- TF card jack: Slot for the Micro SD/TF memory card.
- Power line interface: Connection point for the power cable.
- Rear camera interface: Connection point for the optional rear camera.
Figure 2: The 4K Plug and Play dash cam unit, a smartphone displaying the app interface, and a close-up of the power cable connector.
Figure 3: A detailed diagram of the dash cam's lens components, highlighting features like light correction, sharpness improvement, and deformity correction.
Figure 4: An image displaying the 1K (1080P) Front Camera unit alongside a standard ACC power cable or a Plug and Play power cable.
3. Setup and Installation
3.1. Before Installation
Before proceeding with installation, ensure all accessories are present. If anything is missing, please contact customer service. Ensure the car is turned off before installation.
- Turn off the car engine.
- Insert a high-speed Micro SD/TF card (Class 10 or above, max 128GB) into the Card Slot on the Car DVR properly.
- Choose an installation position near the rearview mirror or in the center vertical for optimal view.
- Clean the chosen position with a clean cloth to ensure proper adhesion.
- Tear off the 3M double-sided tape and paste the dash cam to the selected installation position.
3.2. Rainware Installation Steps
This method integrates the dash cam's power with the vehicle's rain sensor for a clean, hidden installation.
- Remove the original mirror cover.
- Disconnect the rain sensor plug.
- Connect the dash cam cable with the rain sensor male plug.
- Connect the dash cam cable with the rain sensor female plug.
- Assemble the dash cam cover to finish the installation.
Figure 5: A four-panel diagram illustrating the 'New Easy Installation Method' for the dash cam, showing steps to disassemble the mirror cover, connect rain sensor plugs, and assemble the dash cam cover.
3.3. Power Connection from Fuse Box
Alternatively, power can be taken from the car's fuse box. This requires identifying the correct wires:
- Yellow wire: Connect to car battery +12V (constant power).
- Red wire: Connect to car key switch ACC +12V (switched power).
- Black wire: Connect to Ground Wire (usually a metal screw on the car chassis).
Explanation of Power Types:
- B+ (Battery): Power that is not controlled by the key switch (e.g., car interior light, emergency flasher).
- ACC (Accessory): Power controlled by the car key switch. Power is supplied when the key is inserted and turned, and cut when the key is pulled out (e.g., car cigarette lighter, FM radio).
- GND (Ground): Negative pole, usually connected to a metal part of the car.
4. App Installation and Wi-Fi Connection
4.1. Download Viidure App
- iPhone (IOS): Search for "Viidure" on the App Store.
- Android Phone: Search for "Viidure" on Google Play/Play Store.
4.2. Connect Mobile Phone with Dash Cam by Wi-Fi
- Open the "Viidure" app.
- Enter your mobile phone's Wi-Fi settings.
- Select the Wi-Fi hotspot named "CARDV..."
- Enter the default password: 12345678.
- Return to the Viidure app to connect.
5. Operating Instructions
5.1. Automatic Recording Function
The Car DVR is designed to power on and start recording automatically when the car starts. The blue indicator will be steady during recording. It will automatically save records and power off when the car engine is turned off. Recorded images are saved as clips on the memory card. When the memory card is full, new clips will automatically overwrite older ones (loop recording). The default recording time for each clip is 1 minute.
5.2. DVR Function Introduction
- Power button: In recording mode, short press to pause recording; long press for 3 seconds to power off. When operating menu, short press to confirm selection. When Wi-Fi connection is built, short press to cancel the connection.
- Photo button: In recording mode, press short to take photos; press long for 5 seconds to restore factory settings.
- Reset: Short press to restart the device if the Car DVR crashes.
- Indicator light (RED Light/Blue Light):
- RED Light: Blinking when Wi-Fi is connected, long on when Wi-Fi is not connected.
- Blue Light: Flashes when recording, steady when stopping recording.
6. Video Demonstration
Watch this video to see the dash camera's recording quality in various lighting conditions.
Video 1: Dash camera footage demonstrating recording quality during both nighttime and daytime driving conditions.
7. Maintenance
7.1. TF Card Formatting
It is recommended to format the TF card once every other month. Back up any necessary data before formatting. Periodically formatting the DVR memory card helps prevent data loss and ensures normal use of the DVR.
To format the memory card: Open the app, connect to the recorder's Wi-Fi, enter recorder settings, and click "Format memory card".
8. Troubleshooting
- Why can't I turn on the DVR?
Make sure you connect the power of your car when you run the device. Or it can not work well.
- How to set the date and time of the DVR?
Connect your phone with Wi-Fi and the date and time will be updated as your phone does.
- How to understand that the DVR is recording or not?
- If you turn off the phone's connection via Wi-Fi, the blue LED keeps the light, the blue is the flash, it is recording.
- If you connect the phone via Wi-Fi, the red and blue LED flash is recording.
- The APP cannot connect to the DVR?
Please make sure that the TF card is not faulty or the recorder indicator is blinking. If the TF card is pulled out, boot to test whether there is a Wi-Fi hotspot. If there is a Wi-Fi hotspot connection required, replace the TF card. If the Wi-Fi still cannot be connected, use the thimble against the [reset] hole to restart the system.
Alternatively, try to turn off the Bluetooth and mobile data of the mobile phone, and then connect again.
- Recorder cannot record?
Please ensure that the TF card is properly inserted and formatted on the machine. Confirm whether the TF card is a high-speed Class 10 brand original card.
- Forgot Wi-Fi password or can't find Wi-Fi?
Press and hold the camera button for 5-10 seconds to restore Factory settings. Factory default account: CARDV..., password: 12345678.
- The photo button doesn't work?
Check whether the key bar cable is loose or damaged.
- The recorder did not record or recorded a noise?
If there is no sound in the recording, check whether the key cable is loose. If there is recording noise, it may be the Wi-Fi antenna drying up; check the DVR Wi-Fi antenna, move to change the position.
- The car starts the DVR and automatically shuts down one minute?
Check whether the red line ACC is powered on.
- Mobile phone system compatibility problem?
The mobile phone system compatibility problem may cause that the APP cannot be downloaded and cannot be enabled. Try using alternative apps like Timacam or Roadcam.
9. Specifications
| Attribute | Value |
|---|---|
| Brand Name | JMQWE |
| Item Type | Car DVR |
| Assembly Mode | Hidden Type |
| Chipset Manufacturer | NOVATEK |
| Frames Per Second | 30 |
| Camera Resolution | 3840x2160 (4K) |
| View angle | 170° |
| Number Of Lenses | 2 (Dual Camera models) |
| Imaging Sensor | Sony IMX335 |
| Pixels | 1800Mega |
| Video Code | H.264 |
| Video Format | AVI, MOV, MP4 |
| Max External Memory | 256GB |
| Memory Card Required Reading Speed | Class 10 |
| Display Size | <3" |
| Display | OLED |
| Built-in Screen | Yes |
| Touch Screen | No |
| Screen Ratio | NONE |
| Input/Output | Wifi Connection |
| Interface | USB 2.0, Wi-fi, Micro SD/TF |
| Power Source | Corded Electric |
| Battery | None |
| Is Batteries Included | No |
| Battery Capacity(mAh) | None |
| Special Features | G-Sensor, Display Rotate, Digital zoom, motion detection, sd/mmc card, Waterproof, Anti Fog, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, wifi function, Parking Monitor, Loop-Cycle Recording Feature, Audio Recorded, NightShot Function, Rear Camera, Original Package |
| APP Compatibility | Android, IOS, HarmonyOS |
| OSD Language | Albanian, Arabic, Armenian, Azeri, Belarusian, Boolean text (Dutch South Africa), Bulgarian, Catalan, Chinese (Simplified), Chinese (Traditional), Croatian, Czech, Danish, Dutch, English, Estonian, Filipino, Finnish, French, Galicia, Georgian, German, Greek, Haitian Creole, Hebrew, Hindi, Hungarian, Icelandic, Indonesia, Irish, Italian, Japanese, Korean, Latin, Latvian, Lithuanian, Macedonian, Malay, Maltese, Norwegian, Persian, Polish, Portuguese, Romanian, Russia, Russian, Serbian, Slovak, Slovenian, Spain's Basque, Spanish, Swahili, Swedish, Thai, Turkish, Ukrainian, Urdu India, Vietnamese, Welsh, Yiddish |
| Working Temperature | -35 to 85 °C |
| Cable Length | 6.5M |
| Weight | About 0.7kg |
| Origin | Mainland China |
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. For any warranty claims or technical support, please contact the seller directly.
A detailed user manual in PDF format is available for download: View User Manual (PDF).
11. User Tips
- Always use a high-quality, Class 10 or higher Micro SD card for reliable recording.
- Regularly check the dash cam's recording status via the app to ensure it's functioning correctly.
- Periodically format your memory card to maintain optimal performance and prevent data corruption.
- Ensure a stable Wi-Fi connection between your phone and the dash cam for seamless video access and settings adjustments.