1. Introduction
Thank you for purchasing the MICTUNING P1s-W Wireless Switch Panel. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and safe use of your product. The MICTUNING P1s-W offers advanced control for your vehicle's accessories with its wireless capabilities and customizable features.
Key Features:
- Extended Wireless Range & Multi-Panel Connectivity: Control accessories wirelessly up to 328 feet. The power hub supports connecting up to 4 switch panels simultaneously for comprehensive vehicle control.
- Efficient Dual Charging: Features automatic magnetic charging when placed in its holder, or can be charged via a Type-C cable. Offers 14 days of standby time or 8 hours of continuous use on a 2-3 hour charge.
- 4 Control Modes & Customizable Lighting: Choose from Toggle (Red), Momentary (Blue), Flash (Purple), and Strobe (Green) modes. Personalize your panel with 8 RGB backlight colors, 2 dynamic effects (Gradient, Breathing), and 6 brightness levels (0-100%).
- High-Performance and Durability: Available in 8-gang (720W/12V, 1440W/24V, max 60A) and 12-gang (960W/12V, 1920W/24V, max 80A) configurations. IP65 waterproof rating and robust construction ensure reliability.
- Simplified Wiring: The all-in-one control hub streamlines wiring, keeping your setup neat and organized. Includes 140 labeling stickers for easy identification of circuits.
2. Package Contents
Please check the package to ensure all items are present:

- 1x 8-Gang Switch Panel (or 12-Gang Switch Panel, depending on model)
- 1x Control Box
- 1x Wire with Fuse
- 1x Switch Labels (140 pieces)
- 1x USB Cable
- 1x Wire Harnesses
- 1x Antenna
- 1x Mounting Brackets
- 1x Panel Holder
- 1x Cable Ties
- 1x Fasteners
- 1x Screwdriver
- 1x Antenna Sticker
- 1x MICTUNING Stickers
3. Installation
3.1. Switch Panel Installation
The switch panel can be installed in various ways. Choose the method that best suits your vehicle.
Method 1: Fixed Mount
- Align the bracket with the desired hole position on your dashboard.
- Tighten the flat head screws to secure the bracket.

Method 2: Angle Adjustable Mount
- Tighten the base plate screws.
- Tighten the bracket screws to achieve the desired angle.
Method 3: Middle Plate Mount
- Align the bracket with the hole position.
- Tighten the screws to secure the panel.
3.2. Control Box Installation
The control box should be mounted in a secure location, typically under the hood or in another protected area.
Method 1: Fixed Mount
- Align the bracket with the hole position.
- Tighten the bracket screws.
3.3. Wiring Diagram
Refer to the following diagrams for proper wiring of the 8-circuit and 12-circuit fuse blocks.


Antenna Information:
Expose the antenna to enhance the signal. Place the antenna on the right A-pillar of the car for optimal performance.
3.4. To Wire Control Box
- Connect Battery Terminals: Connect the negative terminal of the battery to the negative terminal of the control box, and the positive terminal of the battery to the positive terminal of the control box.
- Connect ACC Wire: Connect the white connector of the ACC wire to the control box.
- Connect Light/Device to Control Box: Connect the light/device wires to the control box. Negative wires can be connected to the common cathode.


3.5. Final Installation Steps
- Connect Switch Panel to Control Box: Connect the switch panel to the control box.
- Connect Antenna: Connect the antenna to the control box.
- Close Cover: After all wiring is completed, close the control box cover.
- Position Antenna: Put the antenna on the right A-pillar of the car.


4. Operation
4.1. Power Source Switch
The control box features a power source switch to select between 'Battery Mode' and 'ACC Mode'.
Video: Demonstrates switching the power source on the control box between Battery and ACC modes.
4.2. Pairing Switch Panel to Control Box
The factory settings usually have the panel and control box pre-paired. If re-pairing is needed, follow these steps:
- Power on the Control Box.
- Press and hold the pairing button on the Control Box for 3 seconds. The indicator will flash red, indicating pairing mode. (Pressing for 8 seconds will clear all pairings).
- Press and hold the RGB button on the Switch Panel. The Control Box's pairing indicator light will turn from flashing to constant red, indicating successful pairing.
Note: The control box can support pairing up to 4 panels. Paired panels will synchronize their indicator lights and switch states, but not their backlight.
Video: Illustrates the process of pairing the switch panel to the control box.
4.3. Main Power Switch of Panel
The switch panel has a main ON/OFF switch on its side. Switching it OFF completely cuts off the panel's power, preventing battery loss when not in use. You can also leave it ON for convenience.
Video: Shows the location and operation of the main power switch on the side of the panel.
4.4. Battery Level Indicators
Long press the On/Off button on the switch panel to display the battery level. Indicators show High, Medium, or Low.
Video: Demonstrates how to check the battery level using the indicators on the switch panel.
4.5. Control Modes
The switch panel offers 4 distinct control modes, each indicated by a different color:
- Toggle (Red): Press once to turn on, press again to turn off.
- Momentary (Blue): Activates the device only when the button is held down.
- Flash (Purple): Flashes at a slower speed, similar to a turn signal.
- Strobe (Green): Strobes like a warning light.
Video: Illustrates the four control modes (Momentary, Flash, Strobe) and their corresponding light behaviors.
4.6. Customizable Lighting
You can customize the panel's lighting to suit your preferences:
- Brightness Adjustment: 6 levels (0%, 20%, 40%, 60%, 80%, 100%). Short press the brightness button to cycle through levels.
- RGB Colors: 8 colors available (Red, Orange, Yellow, Green, Cyan, Blue, Purple, White).
- Dynamic Effects: Choose between Gradient and Breathing effects.
Video: Demonstrates adjusting brightness, changing RGB colors, and showing gradient and breathing effects.
4.7. Labeling Buttons
Use the provided 140 switch labels to clearly identify the function of each button on your panel.
- Wipe clean the switch panel to ensure it's dry and dust-free.
- Peel off the desired label and firmly stick it onto the panel button.
5. Maintenance
5.1. Charging the Switch Panel
The switch panel has a built-in 1000mAh battery and can be charged using two methods:
- Magnetic Charging: Insert the panel into its holder for automatic magnetic charging.
- Type-C Charging: Use the included Type-C cable to charge the panel.
A full charge takes approximately 2-3 hours, providing 14 days of standby time or 8 hours of continuous use. The charging indicator light will be red when charging and turn green when fully charged.
Note: For your safety, do not disassemble the built-in battery.
6. Troubleshooting
- Q: How does a normal switch panel control 2 or more lights at the same time with one button?
- A: Connect the wires from both accessories to the same positive and negative outputs of the control box. Ensure that the accessories connected to a single circuit will not draw more power than the maximum for that control box circuit and the fuse for that circuit.
- Q: The Control Box isn't responding?
- A: Step 1. Check the product to ensure it's properly powered. Step 2. Try re-pairing (refer to the pairing instructions). If you still can't control it, record a video and contact our customer support. We will quickly assist based on the video's situation.
- Q: The Control Box has a black wire antenna. Can it be disconnected?
- A: It cannot be disconnected. It's recommended to let the antenna extend outside the box for better communication range.
- Q: What is the maximum running current?
- A: The 8-gang switch panel is rated for 60A, and the 12-gang is 80A.
- Q: When connected to the battery, the power indicator is always on, will it cause battery loss?
- A: No. The standby current of this product is less than 3mA. A 60AH battery provides 833 days of standby power for the switch panel without charging it.
- Q: What is the function of the control box switch?
- A: The Control Box Switch provides two ways to obtain power: Connect ACC or Battery. It is suggested to obtain power from the battery.
- Q: What is the type of Add-a-Circuit Fuse Tap?
- A: Small fuse tap.
- Q: How do I know if the wiring is correct?
- A: If the power indicator is red on, it means the connection is correct.
- Q: The control box's power was disconnected and reconnected, but my connected devices or lights didn't restore working. Why?
- A: Because the panel is wireless, it stays on when the control box loses power. When the control box powers back on, it is NOT actually synced with the panel. Just turn the panel off and on again to resync it with the control box, then your devices (that are activated on the panel) will start working again.
- Q: The Switch Panel won't charge?
- A: Some phone chargers that use a Type-C to Type-C cable may not be able to charge the panel due to an internal recognition chip. Try using a different charging cable.
7. Specifications
| Feature | Specification |
|---|---|
| Voltage | 12V/24V DC |
| Max Current (8-Gang) | 60A |
| Max Current (12-Gang) | 80A |
| Power (8-Gang) | 720W@12V, 1440W@24V |
| Power (12-Gang) | 960W@12V, 1920W@24V |
| Operating Temperature | -40°C to 105°C |
| Wireless Range | Up to 328FT (under ideal conditions) |
| Battery | Built-in 1000mAh |
| Charging Time | 2-3 hours |
| Standby Time | 14 days |
| Continuous Use Time | 8 hours |
| Waterproof Rating | IP65 |
8. User Tips
- Plan Your Light Installation: Before final installation, consider the placement of your lights and accessories to ensure a clean and efficient setup.
- Charging Options: While the panel offers magnetic and Type-C charging, if you desire direct 12V DC charging, you may need to explore additional accessories or adapters.
9. Warranty & Support
MICTUNING stands behind its products with a commitment to quality and customer satisfaction. We offer:
- Within 4 Hours Friendly Response
- Lifetime Customer Support
If you have any questions or require assistance, please feel free to contact us:
- Email: support@mictuning.com
- Website: http://www.mictuning.com
You can also scan the QR codes on the first page of the manual for direct email support or to watch installation videos.