1. Introduction
This manual provides detailed instructions for the installation and operation of the Wireless CarPlay Android Auto Upgrade Module. This module integrates Apple CarPlay and Android Auto functionalities into your Mercedes Benz NTG5.0 system, enhancing your driving experience with seamless smartphone connectivity.
Compatibility:
- Mercedes Benz vehicles from 2015 to 2018 with NTG 5.0 BT_VER system.
- Applicable models include: A/B/C/E/S/V/CLA/CLS/GLA/GLC/GLE/GLS.
- Supports iOS and Android phone operating systems.
2. Safety Information and Cautions
- CAUTION: Never turn on the ignition with the factory radio removed.
- CAUTION: Ensure CarPlay power is disconnected when adjusting the dip switches. Only connect power after dip switches are correctly set.
- Ensure all cable connections are secure and correct to prevent damage to the product or vehicle.
- If the install mainframe's pilot lamp is not working, check the power cable connection and the fuse.
- Antennas should not be attached to hardware surfaces; ensure the WiFi antenna is not attached to metal.
3. Product Overview
The module integrates with your car's existing system, allowing for voice command, navigation, music playback, and more, controlled via the central knob and steering wheel buttons.
3.1 Components
The package typically includes:
- Main CarPlay/Android Auto Module
- Power Cable
- CAN Gateway Cable
- WiFi Antenna
- LVDS Cable
- RCA/USB Cable
3.2 Key Features
- Wireless and Wired CarPlay/Android Auto support.
- Integration with original car controls (steering wheel buttons, central knob).
- Voice control via Siri (CarPlay) or Google Assistant (Android Auto).
- Support for mobile music playback and precise online navigation.
- Dual system switch to toggle between original car functions and the module.
- Reversing video input capability.
4. Installation Guide
Professional installation is recommended. Refer to the detailed wiring diagram and follow these steps carefully.
4.1 Pre-Installation Checks
- Ensure the vehicle's ignition is OFF and the battery is disconnected before starting installation.
- Identify your car's NTG system version (NTG5.0 BT_VER).
- Determine your car's screen size for correct dip switch settings.
4.2 Dip Switch Configuration
The dip switches on the module must be set according to your car model and screen size. Ensure the module's power is disconnected before adjusting the switches.
| Dip Switch 1 | Dip Switch 2 | Car Model |
|---|---|---|
| OFF | OFF | C/GLC/V/S |
| OFF | ON | A/B/E/CLA/CLS/GLA/GLE/GLS |
| Dip Switch 3 | Dip Switch 4 | Screen Size |
|---|---|---|
| OFF | ON | 800*480 (7.4"/8.4") |
| ON | OFF | 960*540 (8.4") |
| ON | ON | 1440*540 (12.3") |
4.3 Wiring and Physical Installation
Carefully follow the wiring diagram to connect the module to your vehicle's head unit and other components. Ensure all connections are firm and correctly seated.
- Disconnect the original vehicle LVDS cable and connect it to the module.
- Connect the module's LVDS output to the original car's screen terminal.
- Connect the module's power cable (Yellow: B+, Red: ACC, Black: GND) to the vehicle's power supply.
- Connect the CAN Gateway Cable.
- Attach the WiFi antenna, ensuring it is not attached to metal surfaces.
- For reversing camera functionality, connect the blue wire to the camera power supply and the rear-CVBS/AHD720P input to the camera signal.
- Connect the USB cable for mobile phone connection, USB flash drive, or software upgrades.
- Before reassembling, perform initial tests to ensure functionality.
Note: A comprehensive wiring diagram is available in the full PDF manual. You can reference the PDF manual for a visual guide to the connections: View User Manual (PDF)
5. Operating Instructions
Once installed, the module allows you to switch between the original car system and the CarPlay/Android Auto interface.
5.1 Connecting Wireless CarPlay
- On your iPhone, open Wi-Fi and Bluetooth settings.
- On the car's display, navigate to the Wireless CarPlay settings and select "Discover and connect devices".
- Select the Bluetooth device named "CX_BT....." from your iPhone's Bluetooth list and pair.
- Once paired, CarPlay should automatically launch.
5.2 Connecting Wireless Android Auto
- On your Android phone, open Wi-Fi and Bluetooth settings.
- On the car's display, navigate to the Wireless Android Auto settings.
- Select the Bluetooth device named "CX-BTXXXX" from your Android phone's Bluetooth list and pair.
- Once paired, Android Auto should automatically launch.
5.3 Using Car Controls
The module integrates with your vehicle's existing controls:
- Steering Wheel Buttons:
- Long press: Switch between original system and module system.
- Short press: Connect/hang up phone calls.
- Short press: Increase/decrease volume.
- Press: Restart the system.
- Central Control Knob:
- Move knob: Move the cursor on the screen.
- Short press: Confirm selection.
- Move left/right: Cut to the next song.
- Long press: Confirm active voice control (Siri/Google Assistant).
5.4 Audio Settings
For optimal audio, ensure your phone is connected to the original car's Bluetooth for calls and media. In the module's settings:
- Navigate to Setup > Audio Settings.
- Select "Use the original Bluetooth Audio" and set it to ON.
- Ensure "Original multimedia selection aux" is enabled.
5.5 Reversing Camera Settings
If a reversing camera is added, ensure the original camera is turned off in the module's settings. Connect the camera power to the module's cam-power output and the camera video signal to the rear-CVBS/AHD720P input.
6. Maintenance
- Keep the module and connections dry and clean.
- Avoid exposing the module to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to open or repair the module yourself, as this may void the warranty and cause damage.
- Regularly check for firmware updates via the USB port for improved performance and new features.
7. Troubleshooting
- Screen not displaying normally: Check the LVDS cable connection and ensure the DIP Switch settings are correct for your vehicle model and screen size.
- Sound problems: Verify that the Multimedia and install system settings of the original car are correctly configured. Ensure your phone is connected to the original car's Bluetooth for audio playback.
- Mainframe pilot lamp not working: Inspect the power cable connections and check the fuse for any issues.
- Connectivity issues: Ensure Wi-Fi and Bluetooth are enabled on your phone and the correct device name is selected for pairing.
8. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A (Host activates circuit protection if USB charging current > 1A to control current below 1.5A) |
| Module Dimensions | 13.6cm x 7cm x 2.2cm |
| Package Weight | 0.753 kg |
9. User Tips
- Many users report that the installation is straightforward and the product works exactly as expected.
- The module fits perfectly in various Mercedes C Class and GLC models, providing an original and new look.
- Ensure to double-check compatibility with your specific Mercedes model and year (e.g., CLA 200 AMG 2015, V-Class 2018, C450 AMG 2016, GLA 200 X156 2016, GLE 250d 2016) before installation.
10. Warranty and Support
This product comes with a 365-day guarantee. For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact the seller directly.
A complete user manual in PDF format is available for download: View User Manual (PDF)