RACBOX Side Mirror Turn Signal Blinker

Contents

RACBOX LED Car Rearview Mirror Turn Signal Light User Manual

Model: Side Mirror Turn Signal Blinker

1. Product Information

This product is an auxiliary accessory designed for car lighting, intended for the normal replacement and upgrade of original lights. It is not for illegal modification or unauthorized use. The product complies with relevant national automotive lighting industry standards and has undergone strict quality testing.

2. Safety & Warnings

Important Safety Information

Read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Setup & Installation

Before beginning installation, ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical hazards.

  1. Remove Rearview Mirror Cover: Carefully remove the existing rearview mirror cover or housing to access the internal components.
  2. Remove Original Light: Take out the original mirror side light from its housing.
  3. Connect New Light: Connect the wiring plug of the new LED turn signal light to the vehicle's electrical connector. Ensure a secure connection.
  4. Install New Light: Place the new side light into the mirror housing and fix it firmly in position.
  5. Reassemble Mirror: Reattach the rearview mirror cover or housing.
LED turn signal light components and installation view
Figure 1: Overview of the LED turn signal light components and its connection point.
Rear view of the LED light showing the connector
Figure 2: Rear view of the LED light, highlighting the electrical connector.
LED turn signal light installed on a car's side mirror
Figure 3: The LED turn signal light correctly installed on a vehicle's side mirror.

4. Operating Instructions

  1. Test Functionality: After installation, reconnect the vehicle battery and turn on the ignition. Activate the turn signal to test the normal function of the new LED light.

Note: If the light does not turn on, please reverse the plug polarity and retest.

LED turn signal light illuminated (amber)
Figure 4: The LED turn signal light illuminated with amber light, indicating proper function.

5. Maintenance

The LED turn signal light requires minimal maintenance. Periodically inspect the light for any physical damage or debris accumulation. Clean the lens with a soft, damp cloth if necessary to ensure optimal light output.

6. Troubleshooting

  • Light does not illuminate:
    • Check the electrical connection. Ensure the plug is fully seated.
    • If the light still does not illuminate, reverse the polarity of the plug connection.
    • Verify that the vehicle's turn signal circuit is functioning correctly (e.g., check fuses).
  • Light flickers or is dim:
    • Ensure all connections are secure and free from corrosion.
    • Check for any loose wiring.

7. Specifications

FeatureSpecification
MaterialABS
Other Part Number (Left)2048200721
Other Part Number (Right)2048200821
Light ColorAmber
Housing ColorClear
Placement on VehicleLeft + Right
LED Quantity per Unit4 LEDs
Service Life50,000+ hours
Voltage12 V
OriginMainland China

Dimensions

Dimensions of the turn signal light (192mm x 91mm)
Figure 5: Product dimensions: 192mm (length) x 91mm (width).

Compatible Vehicle Models

  • Mercedes C250 Sedan 2012-2014
  • Mercedes C300 2008-2012
  • Mercedes C350 2008-2011
  • Mercedes C63 AMG 2008-2011
  • Mercedes C63 AMG Sedan 2012-2015
  • Mercedes C-Class W204 2007-2011 (Before Facelift)
  • Mercedes-Benz Viano VITO W639 W204 S204
  • Mercedes-Benz C-Class W164 ML300 ML500 ML550 ML320

8. User Tips

No specific user tips were available from reviews or Q&A for this product.

9. Warranty & Support

RACBOX Standard Warranty

RACBOX warrants to the end-user that this product shall materially conform to RACBOX's published specifications in the user manual, subject to the terms and conditions below.

  • Warranty Period: One Year (12 Months) from the date the product is first delivered to the end-user after purchase.
  • What is Covered: The standard warranty provides support, replacement parts, and shipping costs during the Warranty Period for any product due to manufacturing defects of components or workmanship.
  • What is NOT Covered: The warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of RACBOX. The warranty does not cover accessory parts. RACBOX is not responsible for damage arising from end-user error or failure to follow instructions relating to the product's use.
  • How to Get Warranty Service: If you have any questions or need to request a replacement part, please contact RACBOX customer support via phone, email, or through their Live Support system.
RACBOX Warranty information (Standard Warranty, Warranty Period)
Figure 6: RACBOX Standard Warranty details and period.
RACBOX Warranty information (What is Covered, What is NOT Covered)
Figure 7: Details on what is covered and not covered under the RACBOX warranty.
RACBOX Warranty information (How to Get Warranty Service)
Figure 8: Instructions on how to obtain warranty service from RACBOX.

10. Compliance Information

California Proposition 65 Warning:

⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.