BSEED E-Series Wall Light Switch

Contents

BSEED E-Series 1/2 Gang Wall Light Switch User Manual

Brand: BSEED | Model: E-Series Wall Light Switch

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BSEED E-Series 1/2 Gang Wall Light Switches. Please read this manual thoroughly before installation and retain it for future reference.

Safety Warnings

  • Please contact a professional electrician for installation.
  • Before connection, please read the manual instructions carefully.
  • Keep the power off during installation to prevent electric shock.

Product Overview

The BSEED E-Series Wall Light Switch features a modern glass panel design with a blue LED backlight, offering both aesthetic appeal and practical functionality. It supports 1-gang and 2-gang configurations and 2-way control, making it suitable for various lighting setups, including staircases.

BSEED E-Series 2-Way Control Switch Overview
Figure 1: Product overview showing two switches connected for 2-way control.
Elegant Backlit Switch in a Bedroom Setting
Figure 2: The elegant backlit switch with modern design, providing subtle illumination.

Installation

Pre-installation

  • Ensure the main power supply to the circuit is turned OFF at the circuit breaker before starting any electrical work.
  • It is highly recommended to have this product installed by a qualified electrician.

Product Dimensions and Wall Box Requirements

Product Size and Wall Box Dimensions
Figure 3: Product dimensions (86x86x30mm) and recommended wall box dimensions (inner diameter > 60mm, inner depth > 35mm, screw-to-screw size 60mm).

The switch measures 86mm x 86mm x 30mm. For proper installation, ensure your wall box has an inner diameter greater than 60mm and an inner depth greater than 35mm. The wall box screw-to-screw size should be 60mm.

Physical Installation Steps

  1. Unscrew the screw with a screwdriver and carefully remove the glass panel and switch cover.
  2. Connect the electrical wires to the appropriate terminals as shown in the wiring diagrams below.
  3. Tighten the wiring screws securely, ensuring no cables are loose.
  4. Install the switch module into the mounted wall box and tighten the claws to secure it.
  5. Separate the switch button from the glass panel if it's attached.
  6. Reattach the glass panel and switch cover, then tighten the screws.
  7. Install the push button part back onto the switch mechanism.
Detailed Installation Steps for Switch
Figure 4: Visual guide for disassembling, wiring, and reassembling the switch.

Wiring Instructions

The switch requires both a Neutral (N) wire and a Live/FireWire (L) for operation. Ensure all connections are firm and correct according to the diagrams. To insert wires, press the button inward, insert the stripped wire, and then release the button to secure the wire.

Wiring Diagram for 1-Gang and 2-Gang 1-Way Switches
Figure 5: Wiring diagram for 1-Gang 1-Way and 2-Gang 1-Way switch configurations. Connect Neutral (blue) and FireWire (red) to the switch terminals, and then connect the load (light bulb) to the appropriate output terminal.
Wiring Diagram for 2-Way Switches
Figure 6: Wiring diagram for 2-Way switch configurations (e.g., for controlling a light from two different positions, like at the top and bottom of stairs). This setup involves connecting two switches in series with specific inter-switch wiring.

Operation

Basic On/Off Function

The BSEED E-Series switch operates as a touch On/Off switch. Simply press the button on the glass panel to toggle the connected light or appliance on or off.

2-Way Control

For configurations utilizing two switches to control a single light from two different locations (e.g., stairs or long hallways), the 2-way function allows seamless control from either switch.

LED Backlight

The switch features an LED backlight for easy visibility in the dark. The backlight is designed to be off when the light is ON, and illuminate blue when the light is OFF.

Maintenance

To maintain the appearance and functionality of your BSEED E-Series switch, follow these guidelines:

  • Clean the glass panel with a soft, dry, or slightly damp cloth.
  • Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Ensure the power is off before cleaning to prevent electrical hazards.

Troubleshooting

  • Light not turning on/off: Check if the power supply is active. Verify all wiring connections are secure and correctly installed according to the diagrams.
  • LED backlight not working: Ensure the switch is correctly wired and receiving power.
  • If issues persist after checking connections, consult a qualified electrician. Do not attempt to repair the switch yourself.

Specifications

Product Parameters (Switch)

ParameterValue
Item TypeSWITCHES
Switch TypeTouch On/Off Switch
Product SeriesE-Series
TypeEU Standard
MaterialGlass Frame & Iron Plate & Plastic Switch Module
Size86*86*30mm
Wall Box TypeSquare, Round
Wall Box Screw To Screw Size60mm
Switch Working Voltage110V-240V AC
Current10A
Working Temperature-20℃-70℃
Working Humidity≤95%
LED BacklightOn-None, OFF-Blue
2-Way ControlControl Light From Two Positions

Certifications

The product is certified with CCC, FCC, ROHS, CE, UK CA, FC, and EAC standards.

Hazardous Substances Compliance

The components of this product (Panel and backseat, Metal parts) comply with relevant hazardous substance regulations, indicating that substances like Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls, and Polybrominated Diphenylethers are within acceptable limits.

Warranty and Support

Warranty

This product comes with a 1-Year Warranty from the date of purchase.

Manufacturer Information

Manufacturer: WENZHOU MVAVA ELECTRICAL TECHNOLOGY CO.,LTD
Address: No. 529, Binhai 16th Road, Longwan Economic and Technological Development Zone, Wenzhou, Zhejiang Province, China 325025
Contact: Weifeng Lin
Email: mvava1599@outlook.com

Additional Resources

For a downloadable PDF version of the user manual, please refer to the official document: User manual (PDF)

User Tips

  • The product is often sold in a 2-piece package, which is convenient for 2-way control installations.
  • Utilize the 2-way function for easy On/Off control of lights from different rooms or at the top and bottom of stairs.

Frequently Asked Questions (FAQ)

Q: Does this switch require a neutral wire?
A: Yes, the BSEED E-Series wall light switch requires a neutral wire for proper installation and operation, as indicated in the provided wiring diagrams.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.