Heloxyo Conga 2299, 2499, 8290, Ultra, Immortal Home (compatible)

Contents

Instruction Manual for Heloxyo Robot Vacuum Dust Bags

Model Compatibility: Cecotec Conga 2299, 2499, 8290, Ultra, Immortal Home

1. Product Overview

This product consists of replacement dust bags designed for use with robot vacuum cleaners equipped with an automatic dust collection station. These bags are intended only for compatible dust collection bases that support disposable dust bags.

The dust bags feature a multi-layer filtration system to effectively capture fine dust particles, hair, pet dander, dirt, and food residues, preventing them from entering the vacuum cleaner's internal components.

Illustration of dust bag capturing various debris
Image: Powerful functions of the dust bag, capturing 99.97% of fine dust particles including hair, pet dander, dirt, and food residues.

2. Safety Information

  • Do not operate the dust collection base without a dust bag installed.
  • Do not reuse disposable dust bags.
  • Do not wash or clean the dust bag.
  • Keep away from children and pets.
  • Do not expose to fire or high heat.
  • Disconnect power before replacing the dust bag.

Improper use may result in dust leakage or damage to the dust collection system.

3. Product Structure

Typical dust bag components include:

  1. Inlet Cardboard Plate: Connects to the dust port.
  2. Sealing Collar / Inlet Ring: Ensures an airtight connection.
  3. Multi-layer Filter Fabric: Captures fine dust.
  4. Dust Storage Chamber: Expandable internal space.

The dust bag automatically expands during use.

Diagram showing components of the dust bag: sealing ring, non-woven material, and pull-up closure.
Image: Detailed view of the dust bag components, highlighting the EVA sealing ring, non-woven material, and pull-up closure design.
Diagram illustrating the multi-layer filtration system of the dust bag.
Image: Multi-layer filtration system, showing layers of non-woven fabric and melt-blown fabric to prevent dust from entering the vacuum cleaner.

4. Installation Instructions

Step-by-Step Installation

  1. Power off the dust collection base: Unplug the power cord before installation.
  2. Open the top cover of the dust station: Lift gently until fully opened.
  3. Remove the used dust bag (if present):
    • Hold the cardboard plate.
    • Pull upward slowly to avoid dust release.
  4. Insert the new dust bag:
    • Align the cardboard plate with the guide rails.
    • Slide downward until fully seated.
  5. Check sealing position:
    • Ensure the inlet ring fits tightly against the suction port.
    • No visible gaps should remain.
  6. Close the top cover firmly: You should hear or feel a secure closure.
  7. Reconnect power: The system is now ready for use.

Confirm Correct Installation

After installation, verify the following:

  • Dust bag sits flat and vertical.
  • Cardboard plate is fully inserted into the slot.
  • Inlet opening is centered on the suction port.
  • No folding or bending of the inlet area.
  • Station cover closes completely.

Functional Check

After the robot performs auto-emptying, check for:

  • Normal suction sound is heard.
  • No dust escapes from the station.
  • No error indicator on the base.

If abnormal noise or weak suction occurs, recheck installation.

5. Maintenance

Replacement Recommendation

For optimal performance:

  • Replace the dust bag every 30-60 days.
  • Replace immediately if:
    • The dust bag is full.
    • Suction performance decreases.
    • A strong odor is detected.

Replacement frequency depends on: Home size, cleaning frequency, and amount of hair and dust.

6. Troubleshooting

Problem 1: Weak suction during auto-emptying

Possible causes: Dust bag not fully inserted, inlet not aligned.

Solution: Remove and reinstall the dust bag. Ensure the cardboard plate slides fully into place.

Problem 2: Dust leakage inside the base

Possible causes: Inlet ring not sealed, bag folded during installation.

Solution: Reinstall and smooth the inlet area. Confirm tight contact with the suction port.

Problem 3: Base cover cannot close

Possible causes: Dust bag incorrectly positioned.

Solution: Remove bag and reinsert following guide rails.

Problem 4: Station reports dust bag error (if applicable)

Possible causes: Bag not detected due to misalignment.

Solution: Reinstall dust bag. Ensure correct vertical orientation.

7. Specifications

Intended Use

  • Collecting dry household dust, debris, hair, and fine particles.
  • Used inside an automatic dust collection base.
  • For indoor household use only.

Usage Limitations

Do NOT use for:

  • Liquids.
  • Construction dust, cement, plaster, or ash.
  • Sharp objects (glass, metal pieces, nails).
  • Burning or high-temperature materials.
  • Industrial or commercial environments.

Using the dust bag outside the above scope may cause leakage, blockage, or damage to the dust collection system.

Compatibility

These dust bags are compatible with the following robot vacuum cleaner models:

  • Cecotec Conga 2299
  • Cecotec Conga 2499
  • Cecotec Conga 8290
  • Cecotec Conga Ultra
  • Cecotec Conga Immortal Home
Image showing compatible robot vacuum models: 2299, 2499, 8290.
Image: Visual confirmation of compatible models including 2299, 2499, and 8290.

Note: Some user feedback indicates potential fit issues with models not explicitly listed as compatible, such as the Cecotec 7490 or Y70, where the cardboard plate might be narrower than the original. Always verify compatibility before purchase.

Material

Fabric (Non-woven material, Melt-blown Fabric)

Dimensions (Approximate for a single bag)

Product size diagram showing dimensions of the dust bag.
Image: Product dimensions: 5.11 inches (13 cm) height, 7.08 inches (18 cm) width, and 5.11 inches (13 cm) depth.
  • Height: 5.11 inches (13 cm)
  • Width: 7.08 inches (18 cm)
  • Depth: 5.11 inches (13 cm)

Compliance Information

This product is a household vacuum cleaner accessory.

  • Designed for general household use.
  • Contains no electronic components.
  • No batteries included.

8. User Tips

  • When installing, if the cardboard plate feels narrower or thinner than the original, ensure it is adjusted correctly to the right for proper detection by the vacuum's base.
  • Always ensure the bag is fully seated and the inlet ring forms a tight seal to prevent dust leakage.

9. Storage Instructions

  • Store in a dry, cool environment.
  • Avoid moisture and direct sunlight.
  • Keep sealed until use.

10. Customer Support

If you experience installation difficulties or any other issues, please:

  • Recheck the installation steps carefully.
  • Ensure proper sealing of the dust bag.
  • Contact the seller for assistance.

For the full user manual in PDF format, please refer to the official document: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.