ULTIMEA Nova S80

Contents

ULTIMEA Nova S80 5.1.2 Channel Dolby Atmos Soundbar

Model No.: U4120

520W 5.1.2 Soundbar with Dolby Atmos for Smart TV, 4K HDR Pass-through, Home Theater Wireless Bluetooth Soundbar Speakers

1. Setup and Installation

1.1 Accessories List

Please check the package contents against the list below:

ULTIMEA Nova S80 Soundbar accessories including soundbar, subwoofer, surround speakers, cables, remote, and mounting kit.

Image: All accessories included with the ULTIMEA Nova S80 Soundbar system.

  • Soundbar (1)
  • Subwoofer (1)
  • Surround Speaker (2)
  • Power Adaptor (1)
  • Subwoofer Power Cable (1)
  • Stereo RCA to RCA Cable (6m) (1)
  • HDMI Cable (1)
  • HDMI Adaptor (1)
  • Digital Optical Cable (1)
  • Stereo 3.5mm to RCA Audio Cable (1)
  • 6-pin Cable for Soundbar Connection (140mm) (1)
  • Remote Control (1)
  • Wall Mounted Kit (1)
  • Wall Bracket (1)
  • User Manual (1)

1.2 Soundbar Assembly

The soundbar comes in two parts that need to be assembled.

Diagram showing how to assemble the two parts of the soundbar and connect them with a 6-pin cable.

Image: Soundbar assembly steps.

  1. Set the two parts of the Soundbar on the same level and align the connection joints. Connect the two parts by pushing parallelly to combine as one piece.
  2. Plug in the 6-pin Cable into the designated port to secure the connection.

1.3 Connecting to TV via HDMI OUT eARC/ARC

For optimal audio quality, especially for Dolby Atmos, connect your soundbar to your TV using an HDMI cable.

Diagram illustrating HDMI eARC/ARC connection from TV to soundbar.

Image: HDMI eARC/ARC connection diagram.

  1. Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.
  2. Connect the other end of the HDMI cable into the HDMI OUT (ARC) port of the soundbar.
  3. On the remote control, press the "eARC" button to select "HDMI OUT (ARC)" input.

Note:

  • Ensure your TV's HDMI port supports eARC for Dolby Atmos audio signals.
  • For Dolby Atmos content, set your TV's audio output to "Pass Through" (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
  • For DTS content, set your TV's audio output to "PCM" (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
  • Turn on the "CEC" function on your TV. This allows your TV remote to control the soundbar and TV simultaneously (turn on/off, adjust volume).

1.4 Connecting to Other Devices via HDMI IN

You can connect other devices like DVD players or game consoles to the soundbar.

  1. Connect an HDMI Cable from the HDMI OUT (ARC) port on the Soundbar to the eARC / ARC port on your TV.
  2. Connect another HDMI cable from the HDMI OUT port of your external device (e.g., DVD player) to the HDMI IN port on the Soundbar.
  3. Press the "INPUT" button on the Soundbar or Remote Control to switch to the HDMI IN channel.

1.5 Connecting to TV via Optical/AUX

Alternative connection methods for TVs without HDMI ARC/eARC.

Diagram showing optical and AUX audio connections to the TV and soundbar.

Image: Optical and AUX connection diagrams.

Option 1: Optical Connection

  • Connect the optical cable to the OPTICAL OUT port on your TV and the OPTICAL port on the Soundbar.
  • Ensure the optical plug is inserted correctly; improper insertion can damage the cable.
  • If no sound is heard, try setting your TV's audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
  • If audio is coming from internal TV speakers, mute or minimize TV volume.

Option 2: AUX Connection

  • Connect the 3.5mm to RCA audio cable to your TV's RCA AUDIO OUT port. Match the colors of the cable ends with the TV ports.
  • Unplug the AUX cable from both the TV and Soundbar when switching to other modes.

1.6 Connecting to Bluetooth

Pair your mobile device or PC with the soundbar wirelessly.

  1. Press the "BT" button on the soundbar or remote control to enter Bluetooth pairing mode.
  2. Open your phone's Bluetooth settings, find and select "Nova S80" to connect the soundbar.
  3. To disconnect the current device and pair a new one, hold the "BT" button for 3 seconds.

1.7 Connecting Subwoofer and Surround Speakers

The subwoofer connects wirelessly to the soundbar, and the surround speakers connect to the subwoofer via cables.

  1. Use the provided 6m RCA-RCA cables to connect the surround speakers to the subwoofer. Ensure to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer.
  2. Connect the subwoofer to a power outlet using its power cable.

1.8 Pairing Subwoofer

The subwoofer is pre-paired with the soundbar by ULTIMEA. If there is no sound from the subwoofer, you may need to re-pair it.

  1. Press and hold the "BASS MAX" button on the remote control for 5 seconds. The display will show "SUB" flashing.
  2. Press and hold the "PAIR" button on the subwoofer for 5 seconds. The white LED will flash fast, then remain solid when successfully paired.

1.9 Placement Options

Choose the best placement for your sound system based on your home environment for an optimal listening experience.

Diagram showing a 5.1.2 soundbar system setup in a living room with surround speakers and subwoofer.

Image: Example of a 5.1.2 soundbar system setup.

Diagram illustrating 360-degree aural spatial localization technology with sound sources around the listener.

Image: 360° ASL-Aural Spatial Localization Technology diagram.

Diagram showing SurroundX technology projecting sound waves for immersive audio.

Image: SurroundX sound projection diagram.

  • Full 360° Surround: For the most immersive experience, place the soundbar at the front, the subwoofer to the side, and the surround speakers behind the listening position.
  • Front Surround: For a simpler setup, place all components at the front.
  • The soundbar and surround speakers should be placed at or near ear level.

1.10 Wall Mount Installation

The soundbar and surround speakers can be wall-mounted using the provided kit.

Diagrams showing steps for wall mounting the soundbar and surround speakers.

Image: Wall mount installation diagrams for soundbar and surround speakers.

Note:

  • Use the HDMI Adaptor for easy plugging and unplugging of the HDMI Cable during wall mounting.
  • Ensure the wall can support the weight of the devices.

2. Operating Instructions

2.1 Soundbar Controls

The soundbar features a control panel for basic operations.

  • Power Button: Press to power the unit on or off.
  • Input Mode Button: Press to switch between input channels: eARC-HD IN, HDMI IN, OPTICAL, Bluetooth, AUX, USB.
  • BT Button: Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device.
  • Volume Down/Up Buttons: Adjust the sound volume.

2.2 Remote Control Functions

The included remote control provides full command over your soundbar system.

  • Power Button: Turn the soundbar on or off.
  • eARC Button: Switch to HDMI eARC input.
  • HD IN Button: Switch to HDMI IN input.
  • OPT Button: Switch to Optical input.
  • BT Button: Switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect.
  • EQ Button: Switch between sound modes: Movie ("MOVI"), Dialogue ("DLOG"), Music ("MUSC").
  • INPUT Button: Cycle through all input channels: eARC-HD IN, HDMI IN, OPTICAL, Bluetooth, AUX, USB.
  • Volume Up/Down Buttons: Adjust the master volume.
  • Previous/Next Buttons: Skip tracks in Bluetooth and USB modes.
  • Play/Pause Button: Play or pause content in Bluetooth and USB modes. In USB mode, hold for 3 seconds to switch between single loop and list loop playback.
  • Dolby ATMOS Button: Adjust the upward-firing sound level. Display shows "AT-1", "AT 0", "AT 1".
  • SURROUND Button: Adjust the surround sound level. Display shows "SR-2", "SR-1", "SR 0", "SR 1".
  • BASS MAX Button: Adjust the bass level. Display shows "B5-4" to "B5 4".
  • Mute Button: Mute or unmute the sound.

3. Maintenance and Safety

3.1 General Safety Instructions

Please read this user manual carefully and save it for future reference. Unauthorized alterations may void the warranty.

  • Avoid dropping, disassembling, or submerging the device in water.
  • Do not expose to extreme temperatures, direct sunlight, or wet environments.
  • Do not use the device outdoors during thunderstorms.
  • Use only original or certified cables.
  • Do not place dangerous items (e.g., liquid-filled objects, lit candles) on top of the device.
  • Clean with a dry, soft, lint-free cloth. Do not use corrosive cleaners or oil.
  • To prevent hearing damage, avoid listening at high volume for extended periods.
  • Do not expose batteries to extreme heat sources.
  • The ideal operating temperature is between 0°C-45°C (32°F-113°F).
  • The power adapter should be installed near the device and be easily accessible.

3.2 Proper Disposal Instructions

This product should not be disposed of with other household waste. For environmentally safe recycling, contact your retailer or local government office for details.

4. Troubleshooting

  • No Sound:
    • Check all cable connections (HDMI, Optical, AUX) to ensure they are secure.
    • Verify that the correct input mode is selected on the soundbar and remote.
    • Ensure your TV's audio output settings are correctly configured (e.g., Pass Through for Dolby Atmos, PCM for DTS/Optical).
    • Increase the volume on both the soundbar and your TV.
  • Bluetooth Connection Issues:
    • Ensure the soundbar is in Bluetooth pairing mode.
    • Disconnect any previously paired devices by holding the "BT" button for 3 seconds.
    • Try restarting your mobile device or PC.
  • Subwoofer Not Pairing/No Sound:
    • Follow the subwoofer re-pairing instructions in section 1.8.
    • Ensure the subwoofer is powered on.
  • Remote Control Not Working:
    • Check if the remote control batteries are inserted correctly and have sufficient charge. (Batteries are not included).
    • Ensure there are no obstructions between the remote and the soundbar.
  • CEC Function Not Working:
    • Verify that the CEC function is enabled in your TV's settings.
    • Ensure the HDMI cable is connected to an eARC/ARC port on your TV.

5. Specifications

FeatureSpecification
Model NumberU4120
Power SupplyAC 100-240V, 50/60Hz
Total Power Output520W
Soundbar Drivers(3.1" x 1.2") x 3 (Soundbar) + 1.8" x 2 (upward-firing Driver)
Surround Speaker Drivers(3.1" x 1.2") x 2
Subwoofer Driver8"
Frequency Response35Hz - 18kHz
Standby Power<0.5W
Operating Temperature0°C - 45°C / 32°F - 113°F
Bluetooth Version5.3
4K HDR Pass-throughSupported

5.1 Dimensions and Weight

ComponentDimensions (W x H x D)Approx. (inches)
Soundbar800mm x 38mm x 90mm31.5" x 1.5" x 3.5"
Subwoofer315mm x 385mm x 190mm12.4" x 15.2" x 7.5"
Surround Speaker150mm x 38mm x 82mm5.9" x 1.5" x 3.2"
Packaging472mm x 306mm x 430mm15.6" x 12" x 16.9"
Net Weight6.7kg14.77lbs
Gross Weight8.94kg19.71lbs

6. User Tips

  • Wired vs. Wireless Speakers: The Nova S80 features a wireless subwoofer that connects to the soundbar. The two surround speakers are wired and connect directly to the subwoofer using the provided RCA cables.
  • Bass Adjustment: If you find the bass lacking or too strong, use the "BASS MAX" button on the remote control to fine-tune the bass level from "B5-4" to "B5 4" to suit your preference.
  • Immersive Audio: For the best Dolby Atmos experience, ensure your TV's HDMI port supports eARC and set the audio output to "Pass Through." Experiment with the "Dolby ATMOS" and "SURROUND" remote buttons to adjust the upward-firing and surround sound levels.
  • Sound Quality: Many users are pleasantly surprised by the powerful and clear sound quality. Proper placement of the soundbar and surround speakers at ear level can significantly enhance the audio experience.

7. Warranty and Support

For warranty information, technical support, or any inquiries, please contact ULTIMEA customer service:

A comprehensive user manual is available in PDF format for detailed instructions. You can view it here: ULTIMEA Nova S80 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.