ECHTPOWER EP05

Contents

ECHTPOWER Phantom Bluetooth Smart Screen Game Controller User Manual

Model: EP05

Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your ECHTPOWER Phantom Bluetooth Smart Screen Game Controller (Model EP05). Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

ECHTPOWER Phantom Bluetooth Smart Screen Game Controller
The ECHTPOWER Phantom Bluetooth Smart Screen Game Controller.

Product Overview Video

Watch this video for a quick overview of the ECHTPOWER Phantom Game Controller's features and capabilities.

Video showcasing the ECHTPOWER Phantom Game Controller's features including one-screen control, Hall Effect joysticks, linear triggers, 1000Hz polling rate, 1000mAh battery, mappable back buttons, and multi-platform compatibility.

Package Contents

Verify that all items are present in your package:

  • Wireless Controller x1
  • Charging Cable x1
  • Receiver x1
  • Instruction Manual x1

Specifications

ParameterDetail
Product ModelEP05
MaterialPC+ABS+Metal+Silicone
Battery Capacity1000mAh
Charging Power5V/1A
Screen Size1.47 inches
Screen TypeTFT
Hall Effect JoysticksYes
Joystick Sensor Module Brand/TypeK-SLIVER
Trigger Button TypeLinear
Wear-resistant joysticksYes
Battery IncludedYes
High-concerned chemicalNone

Controller Layout

Familiarize yourself with the buttons and features of your controller.

ECHTPOWER Phantom Controller Front View
Front view of the ECHTPOWER Phantom controller, showing joysticks, D-pad, ABXY buttons, screen, and other controls.
ECHTPOWER Phantom Controller Rear View
Rear view of the ECHTPOWER Phantom controller, highlighting the R1/L1, R2/L2 triggers, and mappable back buttons (M1/M2).

Controller Button Map

Detailed diagram of ECHTPOWER Phantom controller buttons and their labels.
Detailed diagram of the controller, showing the display screen, SE/ST buttons, left/right joysticks, ABXY buttons, Turbo button, D-Pad/Menu buttons, Home button, Power switch, R1/L1/R2/L2 joysticks, Type-C charging port, M1/M2 buttons, 3.5 Audio Jack, and Reset button.

Setup and Connection

Initial Use and Charging

Before first use, connect the charging cable to the controller and a power source to fully charge the controller. The charging port is a Type-C port located on the top edge of the controller.

Diagram showing the controller connected to a charging cable.
The controller connected to its charging cable, ready for initial charging.

Switch Connection

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to enter the menu.
  3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
  4. Select "SW" and press R1 to confirm. Press L1 to go back if needed.
  5. Wait for the startup animation to appear.
  6. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu.
  7. On the menu screen, navigate to "Pairing" and press R1 to confirm.
  8. On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order" to select pairing.

Wireless Receiver Connection (PC-Xinput)

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to enter the menu.
  3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
  4. Select "Receiver" and press R1 to confirm. Press L1 to go back if needed.
  5. Wait for the startup animation to appear.
  6. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu.
  7. On the menu screen, navigate to "Pairing" and press R1 to confirm.
  8. Insert the receiver into an available USB port on your PC.
  9. Press and hold the button on the top of the receiver for 1 second to complete the pairing.

Wireless Receiver Connection (PC-Dinput)

If the controller is connected to PC in Xinput mode via the receiver:

  • Press and hold the SE and ST buttons simultaneously for 5 seconds to switch the controller to Dinput mode.
  • Pressing the same button combination again for another 5 seconds will switch it to Switch Pro mode.

Bluetooth PC Connection

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to enter the menu.
  3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
  4. Select "PC" and press R1 to confirm. Press L1 to go back if needed.
  5. Wait for the startup animation to appear.
  6. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu.
  7. On the menu screen, navigate to "Pairing" and press R1 to confirm.
  8. On your PC, enable Bluetooth in the settings and select "Xbox Wireless Controller" from the list of available devices to complete pairing.

Wired PC Connection

Turn the power switch to "ON". Connect the controller directly to your computer using the included USB cable. The controller will automatically configure itself for PC compatibility upon detection.

Bluetooth Phone Connection (Android/iOS)

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to enter the menu.
  3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
  4. Select "Phone" and press R1 to confirm. Press L1 to go back if needed.
  5. Wait for the startup animation to appear.
  6. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu.
  7. On the menu screen, navigate to "Pairing" and press R1 to confirm.
  8. On your smartphone, enable Bluetooth in the settings and select "Xbox Wireless Controller" from the list of available devices to complete pairing.

Language Selection

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to enter the menu.
  3. Use the D-PAD to navigate to the "Language" option.
  4. Press R1 to confirm.
  5. Select your preferred language and press R1 to confirm.
  6. Press L1 to go back to the main menu.

Controller Calibration

To ensure accurate joystick and trigger response, calibrate your controller:

  1. With the controller powered OFF, simultaneously press and hold the A + X buttons.
  2. While holding A+X, turn the power switch to the "ON" position.
  3. The controller will enter calibration mode, indicated by red/blue LED lights flashing at 2 times per second.
  4. In calibration mode:
    • Rotate both the left and right joysticks at normal speed through 2-3 complete rotations.
    • Press the left and right triggers at standard pressure for 2-3 full presses in linear mode.
  5. After completing these steps, place the controller flat on a stable surface.
  6. Press the Select button to finalize the calibration process.
  7. Upon successful calibration, the LED flashing will cease, and the controller will automatically return to its main interface.

Operating Instructions

Turbo Function Settings

The A, B, X, Y, L1, L2, R1, and R2 buttons can be configured with turbo functionality.

  • Manual Turbo: Press and hold the Turbo button simultaneously with any action button to activate manual turbo mode. The selected button will auto-fire when pressed and stop when released.
  • Auto Turbo: Press the Turbo button plus the same action button again to enable automatic turbo. The button will continuously auto-fire until pressed once to toggle on/off.
  • Disable Turbo: Press the Turbo button with the same action button a third time to completely cancel the turbo function for that key.
  • Clear All Turbo: Hold the Turbo button for 3 seconds to disable all turbo configurations. This will be indicated by grayed-out icons on the screen.

Turbo Speed Adjustment:

  • Turbo + Up: Fast speed (16 presses/second)
  • Turbo + Right: Medium speed (8 presses/second)
  • Turbo + Down: Slow speed (4 presses/second)

Back Button Customization (Mappable Back Buttons)

You can map the following controls to the rear buttons (M1 and M2): A, B, X, Y, L1, L2, R1, R2, D-pad directions (Up/Down/Left/Right), L3, and R3.

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Navigate to "Macro" using the D-Pad, then press R1 to confirm.
  4. Press R1 again to choose either M2 or M1. The screen will show already assigned buttons.
  5. Record the desired button inputs.
  6. After completing the recording, press the ST button to confirm and save.
  7. Once successfully saved, press the SE button to exit. The settings are now ready for normal use.

To Reset Back Buttons:

  1. Repeat the menu navigation process to "Macro".
  2. Hold the target back button (M1 or M2) to clear its configuration.
  3. Save with ST and exit with SE.

Light Adjustment

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Select either "Lighting Mode" or "Lighting Brightness" using the D-Pad.
  4. Adjust the built-in LED effects or illumination intensity as desired.

Vibration Adjustment

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Navigate to "Motor Settings" using the D-Pad.
  4. Press R1 to confirm.
  5. Adjust to your preferred vibration intensity.

Volume Adjustment

  1. Turn the power switch to "ON".
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Navigate to the "Volume" option using the D-Pad.
  4. Adjust the headphone output level as desired.

Maintenance

  • Keep the controller clean by wiping it with a dry, soft cloth.
  • Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
  • Do not use chemical cleaners or solvents on the controller.
  • Store the controller in a safe place when not in use to prevent damage.

Troubleshooting

Resetting the Controller

If you experience issues with your controller, you can perform a reset:

  • Method 1 (Physical Reset): Physically press the reset pinhole on the back of the controller using a thin tool (e.g., a paperclip). This will restore the device to its original settings.
  • Method 2 (Software Reset):
    1. Turn the power switch to "ON".
    2. Press and hold the HOME button for 3 seconds to access the menu.
    3. Navigate to "Reset" using the D-Pad.
    4. Hold the R1 button for 3 seconds to complete the reset.

User Tips

  • Gyroscope Functionality: The controller is equipped with a gyroscope for enhanced motion control in compatible games. Ensure your game supports gyroscope input for this feature to work.
  • Screen Customization: Utilize the built-in screen for quick adjustments to settings like pairing, mode, language, macro, vibration, brightness, and volume without needing external software.
  • Hall Effect Joysticks: Benefit from the precision and longevity of Hall Effect joysticks, which are designed to prevent stick drift over time.
  • Multi-Platform Use: Remember to switch the controller to the correct mode (Switch, PC, Phone) via the on-screen menu for seamless compatibility across different devices.

Regulatory Information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2BDA4STK-7052P

Declaration of Conformity (CE & UKCA)

The ECHTPOWER Phantom Gamepad (EP05) conforms to EC and UK standards for radio interference. The product complies with directives such as EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2020, ETSI EN 301 489-1 V2.2.3(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), and ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance and UKCA Declaration of Compliance can be found on: www.echtpower.com

Hazardous Substances Content

This product complies with SJ/T 11364 regulations regarding hazardous substances. The table below indicates the presence of hazardous substances in homogeneous materials:

Part NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))Polybrominated Biphenyls (PBB)Polybrominated Diphenyl Ethers (PBDE)
Plastic PartsOOOOOO
Painted PartsOOOOOO
Metal PartsOOOOOO
Electronic ComponentsXOOOOO
Main BoardXOOOOO
BatteryXOOOOO

O: Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement of GB/T26572.

X: Indicates that the content of this hazardous substance in at least one homogeneous material of this part exceeds the limit requirement of GB/T26572, and there is currently no mature alternative in the industry, conforming to the EU RoHS directive environmental requirements.

The number "10" in the label indicates that the environmental protection use period of the product under normal operating conditions is 10 years.

Precaution

  • Do not expose it to liquid.
  • Do not disassemble it.
  • Avoid dropping it.
  • Avoid extremely high or low temperature.

For a complete, multi-language version of this user manual, you can download the official PDF document from here.

Support and Contact Information

  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
  • Email: service@echtpower.com
  • Website: www.echtpower.com
  • Tel: 0755-21010839
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.