Introduction
Thank you for purchasing the NYXI Wizard 2 TMR Game Controller. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your controller. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

NYXI Wizard 2 TMR Game Controller with its detachable design.
Package Contents
Please check the package to ensure all items are present:
- NJ10 Left Controller ×1
- NJ10 Right Controller ×1
- NJ10 Middle Bridge ×1
- Multi-function Receiver ×1
- USB-C Charging Cable ×1
- Receiver Extension Cable ×1
Technical Specifications
| Feature | Detail |
| Connectivity | Bluetooth 5.0, 2.4G Wireless |
| Battery Capacity | 400mAh (per controller) |
| Charging | 5V/0.4A via USB-C |
| Materials | PC + ABS + Metal + Silicone |
| Weight | 225g |
| Dimensions | 106 × 155 × 65.5mm |
| Hall Effect | Yes |
| Joystick Sensor Module | K-SLIVER |
| Trigger Button Type | Linear |
| Compatible Platforms | Nintendo Switch, Switch 2, PC, Android, iOS, NGC, Wii |
Setup and Connection
Controller Layout Diagram

Detailed view of the NYXI Wizard 2 TMR controller's buttons and ports.
- LED Channel Light: Indicates player number and status.
- Home Button: Powers on/off, returns to home screen.
- Screen Button: (Left Controller) Specific function button.
- Mechanical Microswitch ABXY Buttons: Face buttons with tactile feedback.
- TMR Hall Joystick: Left analog stick with anti-drift technology.
- C-Stick TMR Hall Joystick: Right analog stick with anti-drift technology.
- Mechanical D-PAD: Directional pad.
- Setting Button: Used for programming and turbo functions.
- Type-C Charging Port: For charging the controller.
- R/L Buttons: Shoulder buttons.
- Lock Button: Secures/releases controllers from the middle bridge or console.
- ZR/ZL Linear Hall Trigger: Analog triggers for precise input.
- MR/ML Buttons: Mappable back buttons.
- Left/Right Trigger Locks: Physical locks for triggers.
- SL/SR Buttons: Side buttons for individual controller use.
- Reset: Small button to reset the controller.
Connecting to Nintendo Switch
- Slide the controller downward along the rails on both sides of the console screen until it clicks. The "Controllers" interface on the console will display connected left/right controllers.
- To remove the controller, press the release button on the back of the controller and slide it upward.
- When the console is powered on, detaching the controller from the rails will automatically establish a Bluetooth connection with the Switch.
- When the console is powered off, detach the controller from the rails and press the Home Button to power on and reconnect.
Receiver Connection to PC (XINPUT MODE)
- Press and hold the Home Button for 3 seconds to power on. LEDs 1-4 on both controllers will flash green sequentially.
- Insert the receiver into the PC and press and hold its button until the LED blinks rapidly.
- Wait for pairing.
Receiver Connection to PC (DINPUT MODE)
- In Xinput mode, press and hold A + B + Home to switch to Dinput mode. LEDs 1-4 will blink green three times.
- Repeat the same key combination to switch back to Xinput mode.
Receiver Connection to PC/NGC
- Press and hold the home button of the right handle for 5 seconds to turn on the device, and the LED1-4 of the right handle will flash green.
- Plug the receiver into the computer, and press and hold the button on the receiver until the LED flashes quickly.
- Wait for the right handle and receiver to pair successfully, and the LED lights of the receiver and the handle will be on.
- Press and hold the button on the receiver again until the LED flashes quickly, and press and hold the screen button on the left handle for 5 seconds until the LED1-4 of the left handle flashes green.
- Wait for the left handle and receiver to pair successfully before it can be used normally.
Receiver Connected to Wii
- Turn on the Wii console, enter the game, and connect the original controller.
- After entering the game, unplug the original adapter, and then plug the NJ10 receiver into the console, and press and hold the button on the receiver until the LED flashes quickly.
- Press and hold the home button of the right handle for 5 seconds to turn on the device, and the LED1-4 of the right handle will flash green.
- Wait for the right handle and receiver to pair successfully, and the LED lights of the receiver and the handle will be on.
- Press and hold the button on the receiver again until the LED flashes quickly, and long press the screen button on the left handle for 5 seconds until the left handle LED1-4 flashes green.
Operating Instructions
Joystick Calibration
- Press SL + SR + + Button (left controller: - Button) to enter calibration mode.
- Rotate the joysticks fully in all directions.
- Press the same keys again to exit. A 1-second vibration confirms completion.
- Switch System Calibration: Navigate to Settings > Controllers & Sensors > Calibrate Control Sticks and follow on-screen instructions.
Trigger Calibration
- Press SL + SR + Home (left controller: Capture Button) to enter calibration mode.
- Press triggers fully to calibrate.
- Exit using the same keys (1-second vibration confirms completion).
6-Axis Gyroscope Calibration
- On Switch: Navigate to Settings > Controllers & Sensors > Calibrate Motion Controls.
- Place the controller on a flat surface and follow on-screen prompts. Press - and + Buttons to complete calibration.
Turbo Function
- Supported Buttons: D-pad, A, B, X, Y, L, R, ZL, ZR.
- Enable Turbo: Hold the Setting Button, press a target button, then release. LED4 glows white.
- Adjust Speed: Default is 12Hz (adjustable via app).
- Disable Turbo: Press the Setting Button + target button three times (LED4 turns off).
Button Programming (Mappable Back Buttons M1/M2)
- Can be mapped to other buttons or macros (max 21 actions per macro).
- Mapping: Hold Setting Button + target back button for 3 seconds. Press the desired button/macro sequence, then press the back button again to save.
- Clear Mapping: Hold Setting Button + back button for 3 seconds, then press the back button without input.
Official product video showcasing the NYXI Wizard 2 TMR controller's features, modular design, Hall Effect joysticks, mechanical buttons, and multi-platform compatibility.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the controller or subjecting it to strong impacts.
- Liquid Exposure: Do not expose the controller to liquids.
- Disassembly: Do not attempt to disassemble or modify the controller, as this will void the warranty and may cause damage.
Troubleshooting
- Controller not connecting/pairing:
- Ensure the controller is charged.
- Follow the specific connection steps for your platform (Switch, PC, NGC, Wii).
- Try resetting the controller using the small reset button.
- Ensure the receiver is properly plugged in and its LED is blinking as expected.
- Joystick drift or inaccurate input:
- Perform Joystick Calibration as described in the Operating Instructions.
- Perform 6-Axis Gyroscope Calibration if motion controls are affected.
- Buttons not responding:
- Check if the controller is properly connected.
- Ensure no button programming conflicts exist; try clearing button mappings.
- Reset the controller.
- Controller not charging:
- Use the provided USB-C charging cable.
- Ensure the charging port is clean and free of debris.
- Try a different USB power source.
User Tips
- Users appreciate the modular design; experiment with the middle bridge for different ergonomic feels.
- For competitive gaming, ensure you perform joystick and trigger calibrations regularly to maintain precision.
- Utilize the mappable back buttons for quick access to complex commands, enhancing your gameplay experience.
Warranty and Support
For detailed warranty information, technical support, and service inquiries, please refer to the official NYXI product website or the full user manual PDF available at https://manuals.plus/m/a31f8d5e3bbe8134afb25ee73051bf3867c271f1212753a68a5633edbd7d4315.
Compliance and Safety Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Precautions
- Do not expose the controller to liquid.
- Do not disassemble the controller.
- Avoid dropping the controller.
- Avoid exposing the controller to extremely high or low temperatures.
Disposal Information
The symbol on the product indicates that it should not be disposed of with household waste. Please bring it to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.