JIUYIN Motorcycle DVR

Contents

JIUYIN Motorcycle DVR Instruction Manual

Model: Motorcycle DVR

Brand: JIUYIN

1. Introduction

Thank you for choosing the JIUYIN Motorcycle DVR. This device is a high-definition dual-lens action camera designed specifically for motorcycles, offering front and rearview recording capabilities. It features IPX67 waterproofing, automatic loop recording, F1.8 large aperture starlight night vision, and WiFi smart connectivity for easy control and data management via a dedicated mobile application. This manual provides essential information for the safe and effective use of your new motorcycle DVR.

JIUYIN Motorcycle DVR main unit and two cameras

Image: JIUYIN Motorcycle DVR main unit and dual cameras.

2. Safety Information

Disclaimer

While complying with national laws and regulations, please pay attention to the safety of yourself and others when using this product. The product features may be updated due to technological advancements. The images in this manual may differ from the actual product.

Special Attention

  • Voltage Requirements: This product is suitable for 12-24V voltage operation. Using it below or above this voltage range may cause the product to malfunction.
  • Memory Card: When inserting the memory card for the first time, please format it using the dedicated mobile application. If the memory card is not recognized, format it in the app or use a computer. It is recommended to use a high-quality memory card (Class 10 or higher).
  • Power Supply: Always ensure the power supply is connected correctly. If recording is short or the camera doesn't work, verify the power supply connections and the device indicator status.
  • Waterproofing: After installing the cameras, ensure the waterproof caps are securely tightened to maintain the IPX67 waterproof effect.
  • Cleaning: Do not clean the product with corrosive agents, as they may damage the waterproof sealing and other components.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your seller.

Motorcycle DVR components including main unit, cameras, ACC line, parts, and 3M adhesive

Image: Components of the JIUYIN Motorcycle DVR system.

  • Main DVR Unit
  • Front Camera
  • Rear Camera
  • ACC Power Line
  • Mounting Parts & 3M Adhesive
  • User Manual (PDF available online)
  • (Optional) MicroSD/TF Card (depending on selected variant)

4. Specifications

Feature Specification
Brand NameJIUYIN
Sensor TypeCCD
Original PackageYes
Touch ScreenNo
Memory Card Required Reading SpeedClass 10
Video CodeH.264
Video FormatTS
Memory Card TypeMicroSD/TF
Camera Resolution1920*1080 (1080P)
Special FeaturesCycle Recording, Night Vision, Dual Lens, Waterproof, Anti Vibration
Frames Per Second30
PlacementMotorcycle Head (Front and Rear)
View Angle160°
Max External Memory128G
Pixels200Mega
OriginMainland China
Sensor Size1/1.0 inches
Image StabilizationDual image stabilization
InterfaceMicro SD/TF
Features 1Front and rear 1080P dual recording
Features 2F1.8 large aperture starlight night vision
Features 3160 ° wide-angle
Features 4IPx67 level full body waterproof
Features 5Automatic loop recording
Features 6Collision induction

5. Setup

5.1 Power Supply Wiring

The DVR system is powered by your motorcycle's electrical system. Ensure the motorcycle's power is turned off before installation.

There are two common wiring types:

  1. Type 1 (with fuse):
    • Yellow (BATT): Connect to a constant 12-24V power source (e.g., directly to the battery positive terminal).
    • Red (ACC IN): Connect to a switched 12-24V power source that turns on/off with the ignition.
    • Black (GND): Connect to the negative pole of the battery or a suitable ground point on the motorcycle chassis.
  2. Type 2 (without fuse):
    • Red (ACC IN): Connect to a switched 12-24V power source that turns on/off with the ignition.
    • Black (GND): Connect to the negative pole of the battery or a suitable ground point on the motorcycle chassis.

Ensure all connections are secure and insulated to prevent short circuits.

5.2 Camera Installation

Mount the front and rear cameras in desired locations, ensuring a clear view and secure attachment using the provided mounting parts and 3M adhesive. Match each camera to its corresponding port on the main DVR unit (front camera to front port, rear camera to rear port).

Example of camera installation on a motorcycle, showing a camera mounted near a headlight.

Image: Example of front camera installation on a motorcycle.

Example of camera installation on a motorcycle, showing a camera mounted under a fairing.

Image: Example of rear camera installation on a motorcycle.

After installation, securely tighten the waterproof caps on the camera connections to ensure IPX67 water resistance.

5.3 Memory Card Installation and Formatting

Insert a MicroSD/TF card (Class 10 or higher, up to 128GB) into the designated slot on the main DVR unit. For first-time use or if the card is not recognized, it must be formatted.

  1. Connect your mobile phone to the DVR via WiFi (see Section 6.3).
  2. Open the dedicated APP.
  3. Navigate to the settings menu within the APP.
  4. Select the option to

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.