HLTNC HL-01

Contents

HLTNC HL-01 Micro Stepper Motor Motion Controller User Manual

Model: HL-01

1. Product Overview

The HLTNC HL-01 is a compact micro stepper motor motion controller designed for precise control of stepper motors. It features a 5V pulse generator, allowing for speed adjustment and convenient forward/reverse switching. This controller operates with a 9-24VDC input, making it versatile for various applications.

HLTNC HL-01 Micro Stepper Motor Motion Controller
Figure 1: HLTNC HL-01 Micro Stepper Motor Motion Controller

2. Package Contents

Please check the package for the following items:

  • 1 x HLTNC HL-01 Micro Stepper Motor Motion Controller

3. Component Identification

Labeled diagram of the controller's interface
Figure 2: Controller Display Interface
  • GND: Ground connection for power input.
  • +9-24V Input: Power input terminal (9-24VDC).
  • Reverse button: Changes the direction of motor rotation to reverse.
  • Potentiometer speed Control knob: Adjusts the motor speed.
  • Forward rotation button: Changes the direction of motor rotation to forward.
  • 9-24V Output: Power output terminals for the stepper motor driver.
  • DIR: Direction signal output.
  • PUL: Pulse signal output.
  • D-/P-: Common ground for DIR and PUL signals.
  • +5V: 5V power output.

4. Setup and Wiring

Follow these steps to correctly set up and wire your HL-01 controller:

4.1 Power Connection

  1. Connect your 9-24VDC power supply to the '+9-24V Input' and 'GND' terminals on the controller. Ensure correct polarity.

4.2 Connecting to a Stepper Motor Driver

The HL-01 controller generates pulse and direction signals for a stepper motor driver. Connect the controller to your microstep driver (e.g., DM556) as follows:

  • Connect the PUL+ terminal on your driver to the +5V terminal on the controller.
  • Connect the DIR+ terminal on your driver to the +5V terminal on the controller.
  • Connect the PUL- terminal on your driver to the PUL terminal on the controller.
  • Connect the DIR- terminal on your driver to the DIR terminal on the controller.
Detailed wiring diagram connecting controller, driver, and power supply
Figure 3: Wiring Diagram for HL-01 Controller with Stepper Driver

4.3 Setup Demonstration Video

Watch this video for a visual guide on connecting and operating the HL-01 controller:

Video 1: HL-01 Controller Connection and Operation Demonstration

5. Operating Instructions

Once the controller is correctly wired and powered on, you can operate it using the following controls:

  • Speed Adjustment: Rotate the potentiometer knob to increase or decrease the pulse frequency, thereby controlling the speed of the stepper motor.
  • Direction Control: Press the 'Forward rotation button' for clockwise rotation or the 'Reverse button' for counter-clockwise rotation.

6. Specifications

FeatureSpecification
Model NumberHL-01
Input Voltage9-24VDC
Pulse Signal Voltage5V
Motor TypeDC Motor
CertificationsCE, RoHS
EU LVD VoltageBelow 50Vac or 75Vdc
High-concerned chemicalNone
OriginMainland China
Dimensions (Overall Width)35.9mm x 40mm
Height11.9mm
Depth22.9mm
Weight17g
Package Dimensions10cm (L) x 5cm (W) x 5cm (H)
Package Weight0.04 kg
Dimensions and weight of the HL-01 controller
Figure 4: HL-01 Controller Dimensions and Weight
Various views of the HL-01 controller (front, side, top, bottom)
Figure 5: Product Views (Front, Side, Top, Bottom)

7. Maintenance

The HL-01 controller is designed for low maintenance. To ensure optimal performance and longevity:

  • Keep the device clean and free from dust and debris.
  • Avoid exposing the controller to extreme temperatures or humidity.
  • Ensure all connections are secure to prevent intermittent operation.

8. Troubleshooting

If you encounter issues with your HL-01 controller, consider the following:

  • Motor not moving: Check power supply connections and ensure the input voltage is within the 9-24VDC range. Verify all signal connections (PUL, DIR) to the stepper motor driver are correct and secure.
  • Incorrect direction: Use the forward/reverse buttons to change the motor's rotation direction.
  • Motor speed inconsistent: Ensure the potentiometer knob is clean and functioning correctly. Check for stable power supply.
  • No response from buttons/knob: Recheck power and signal connections. Ensure the controller is receiving adequate power.

9. User Tips

  • This controller works effectively for small stepper motor applications.
  • Always refer to the provided wiring diagram for accurate connections to avoid damage.
  • The potentiometer offers precise control over motor speed, allowing for fine-tuning.
  • The dedicated forward and reverse buttons simplify direction changes during operation.

10. Frequently Asked Questions (FAQ)

Q: What is the input voltage range for this controller?
A: The controller operates with an input voltage range of 9-24VDC.
Q: What is the pulse signal voltage?
A: The pulse signal output is 5V.
Q: Can this controller adjust both speed and direction?
A: Yes, it supports both speed adjustment via the potentiometer and forward/reverse switching using dedicated buttons.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the manufacturer directly. A user manual in PDF format is available for download:

Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.