1. Introduction
This manual provides detailed instructions for the TECTINTER 2 in 1 Wireless Controller, designed for Nintendo Wii and Wii U consoles. It features built-in Motion Plus, vibration feedback, and Bluetooth connectivity for an immersive gaming experience. This controller is fully compatible with both console models, ensuring smooth and interactive operation.
2. Package Contents
Please check the package for the following items:
- Remote Controller for Nintend Wii (Optional) x1
- Nunchuck Controller for Nintend Wii (Optional) x1
- Wrist Strap (Optional) x1
- Silicone Case (Optional) x1
Note: The appearance of the remote with Motion Plus may vary slightly, but the function is identical.

3. Specifications
| Feature | Description |
|---|---|
| Compatible Devices | Nintendo Wii Console, Nintendo Wii U Console |
| Power Supply | 2 x AA batteries (not included) |
| Material | Fire-retardant ABS Plastic + Non-slip Rubber |
| Interface Type | Bluetooth |
| Trigger Button Type | Non-Linear |
| Wireless Range | Up to 8 meters |
| Max Connected Units | 4 controllers |
| Built-in Features | Motion Plus, Speaker, Vibration Feedback |

4. Setup Instructions
4.1 Pre-use Check
Before use, please carefully check the handle, battery compartment, and interface. Ensure there is no dust, dirt, damage, or loose connections that may affect the connection or functional use.
4.2 Battery Installation
- Open the battery compartment at the back of the handle.
- Install 2 AA batteries correctly according to the positive and negative marks inside the compartment.
- Close the battery compartment firmly to ensure stable power supply.

4.3 Wireless Pairing
- Power on your Wii/Wii U console.
- Power on the controller by pressing the POWER button. The indicator lights will turn on, indicating normal power supply. The controller will automatically enter pairing mode.
- If pairing fails, open the battery compartment of the remote controller and locate the small red SYNC button.
- Open the SD card slot on the console and locate the red SYNC button next to it.
- Press the SYNC button on both the controller and the console simultaneously.
- Wait for a few seconds. The Player LED on the controller will stop flashing and light up steadily, indicating a successful connection. The lit LED indicates the player number.
For Wii/Wii U console, you may also need to open the Menu and follow the on-screen instructions to complete the pairing procedure. If you encounter any pairing problems, please refer to the troubleshooting section or contact support.

Video 1: How to Connect and Game Demo.
5. Operating Instructions
5.1 Basic Controls
The controller supports basic button operations, motion sensing control, and direction control. It is compatible with the Wii Motion Plus function (if equipped) for accurate identification of game operation instructions.

5.2 Motion Sensing Use
When using the motion sensing function, ensure that the handle is aligned with the Wii motion sensor bar (placed above or below the TV). Avoid obstacles between the handle and the sensor bar to ensure accurate identification of motion trajectory.

5.3 Vibration Feedback
The controller features a built-in vibration motor to enhance your gaming experience, providing strong feedback that makes you feel like you are on the battlefield.

5.4 Built-in Speaker
A powerful built-in speaker provides instant audio feedback, greatly enhancing the immersive feeling during gameplay.

5.5 Ergonomic Design
The controller features an ergonomic handle shape that fits comfortably in the palm of your hand, allowing for comfortable long-term play. The surface is equipped with non-slip rubber to increase friction and prevent slipping during intense game operation. The gamepad is designed with a 3D rocker for 360° high precision and a comfortable cross key for flexible and accurate steering.

5.6 Multi-Player Support
You can connect up to 4 controllers to one console, allowing you to enjoy games with friends and family.

6. Maintenance
6.1 Post-use Operation
After the game is completed, press the power button on the handle to turn off the power.
6.2 Long-term Storage
If the controller will not be in use for a long time, please remove the 2 AA batteries to prevent battery leakage and corrosion of internal components. Store the handle in a dry, cool, and dust-free environment to avoid damage caused by battery leakage or dust accumulation.
7. Troubleshooting
- Pairing Problems: If you experience difficulty pairing the controller, ensure you are pressing the SYNC buttons on both the controller and the console simultaneously. Refer to section 4.3 for detailed steps. If issues persist, try restarting both the console and the controller.
- Nunchuck Stick Grip: If the nunchuck stick does not grip properly initially, try moving the stick repeatedly to loosen it up.
- Motion Sensing Inaccuracy: Ensure the controller is properly aligned with the Wii motion sensor bar (placed above or below the TV) and that there are no obstacles between the controller and the sensor bar.
- Controller Not Responding: Check if the batteries are correctly installed and have sufficient charge. Replace with new batteries if necessary.
8. User Tips
- For optimal performance, use fresh, high-quality AA batteries.
- If the nunchuck feels stiff initially, repeated use can help improve its responsiveness.
- Always ensure a clear line of sight between the controller and the sensor bar for accurate motion tracking.
- Keep the silicone case on the remote controller to protect it from everyday dust, scratches, and minor impacts.
9. Safety Warnings CE
- Battery Use Warning: Use only matching 2 AA batteries. Do not mix new and old batteries, or use non-standard batteries, as this may cause battery leakage, bulging, short circuit, or damage to the handle.
- Moisture and Flammable Warning: Keep the handle away from water, damp areas, flammable, and explosive materials. Do not use the handle with wet hands, as this may cause short circuit or other safety hazards.
- Physical Damage Warning: Do not drop, squeeze, disassemble, modify, or burn the handle. This may damage internal components, cause functional failure, and affect normal use.
- Environment Warning: Do not use the handle in high-temperature (above 60°C) or low-temperature (below 0°C) environments, which may affect performance, damage the battery, and reduce service life.
- Children Supervision: Children should use or approach the handle under adult supervision to prevent accidental swallowing of batteries, damage to the handle, or accidental injury during use.
- Damaged Handle Warning: If the handle is damaged (e.g., shell cracking, button failure, interface damage, or abnormal indicator light), please stop using it immediately and replace it with a new compatible handle.
- Long-term Unuse Warning: When the handle is not in use for a long time, please remove the batteries and store the handle in a dry, cool, and dust-free environment to avoid damage caused by battery leakage or dust accumulation.
10. Warranty and Support
All products come with a 3-month warranty from our store. For any questions, technical support, or warranty claims, please contact the seller directly.
A detailed user manual in PDF format is available for download: TECTINTER 2 in 1 Wireless Controller User Manual (PDF)