VTOMAN Jump 1500 Extra Battery

Contents

VTOMAN Jump 1500 Extra Battery User Manual

Model: Jump 1500 Extra Battery (PB-26)

Brand: VTOMAN

1. Introduction

This manual provides essential instructions for the safe and efficient use of your VTOMAN Jump 1500 Extra Battery. Please read this manual thoroughly before operating the product and retain it for future reference. The VTOMAN Jump 1500 Extra Battery is designed to extend the power capacity of compatible VTOMAN power stations.

VTOMAN Jump 1500 Extra Battery with 1548Wh capacity and 1500W rated power.
Figure 1: VTOMAN Jump 1500 Extra Battery with key specifications.
Key features of the VTOMAN Jump 1500 Extra Battery: 1548Wh Large Capacity, LiFePO4 Durable & Safe, 3000 Cycles Long-lasting Lifespan, LIFEBMS Multiple Protection.
Figure 2: Overview of the Jump 1500 Extra Battery's core features.

2. Product Function Overview

The VTOMAN Jump 1500 Extra Battery is designed to seamlessly integrate with compatible VTOMAN power stations. Below is an overview of its main components and their functions:

Product Overview diagram showing Battery Check Button, Battery Indicator, and CP3500 Connecting Port.
Figure 3: Product Overview with labeled components.
  • Battery Check Button: Press to view the current battery charge level.
  • Battery Indicator Light: Displays the remaining power in increments (25%, 50%, 75%, 100%).
  • CP3500 Connecting Port: Used to connect the extra battery to a compatible VTOMAN power station.

3. Setup and Connection

The Jump 1500 Extra Battery is compatible with the following VTOMAN power stations:

  • VTOMAN Jump 1000
  • VTOMAN Jump 1500X
  • VTOMAN Jump 1500
  • VTOMAN Jump 2200
VTOMAN Jump 1500 Extra Battery connected to a compatible VTOMAN power station.
Figure 4: The extra battery is compatible with various VTOMAN power stations.

Connecting the Extra Battery:

  1. Using the provided CP3500 cable, connect the extra battery to your VTOMAN power station. Ensure a secure connection at both ends.
  2. Once connected, the extra battery will automatically integrate with the power station's system.

Charging the Extra Battery (via Power Station):

The extra battery is charged indirectly by connecting it to a VTOMAN power station, which is then charged from an external source.

Diagram illustrating how to charge the extra battery by connecting it to a VTOMAN power station via CP3500 cable, and then charging the power station via wall outlet, car outlet, or solar panel.
Figure 5: Charging diagram for the extra battery through a power station.
  1. Connect the extra battery to the VTOMAN power station using the CP3500 cable.
  2. Connect the VTOMAN power station to a power source (e.g., wall outlet, car outlet, or solar panel) to begin charging both units.

4. Operation

Output Priority:

  • When no charger is plugged in, the extra battery has output priority.
  • If the extra battery's power is exhausted, the system will automatically switch to the main power station's battery to continue output without interruption.

Simultaneous Charging and Discharging:

  • If both charging and discharging occur simultaneously, the main power station's battery will be charged and discharged first until it is full.
  • Once the main power station's battery is fully charged, the system will automatically switch to the extra battery for charging and discharging.

Power Display:

  • During Charging: The main power station's display shows its own remaining power. The extra battery's display shows its own remaining power.
  • During Discharging: The main power station's display shows the combined power of both the main and extra batteries. The extra battery's display shows its own remaining power.

Important Note:

When the main and extra battery are operating, do not directly disconnect the CP3500 cable between them, as this may interrupt the current output.

High Temperature Warning:

The CP3500 cable may generate high temperatures during operation. Please avoid touching it to prevent scalding.

5. Technical Specifications

ParameterValue
Product NameJump 1500 Extra Battery
Model No.PB-26
Battery Capacity1548Wh
Battery TypeLiFePO4
Nominal Capacity>3500mAh
Operating Temperature-20°C to 55°C (-4°F to 131°F)
Charging Temperature0°C to 55°C (32°F to 131°F)
Input200W (MAX)
Output1000-1500W (MAX)
Product Weight14.7KG (32.4 lbs)
Product Size360x270x280mm (14.2x10.6x11 inch)
ConnectionOther
ApplicationHome Energy
CertificationCE, FCC, RoHS, UL

6. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

  • 1 x Jump 1500 Extra Battery
  • 1 x CP3500 Cable
  • 1 x User Manual
Image showing the Jump 1500 Extra Battery, CP3500 Cable, and User Manual.
Figure 6: Contents included in the package.

7. Maintenance

  • Keep the battery dry and do not place it in water or damp environments.
  • Ensure the product is kept under well-ventilated conditions.
  • If not in use for a long period, charge the battery every 12 months to prevent insufficient power.
  • Dispose of lithium battery products according to local laws and regulations at the end of the product's life.

8. Troubleshooting

Refer to the table below for common issues and their solutions:

Trouble PhenomenonTroubleshootingSolution
The product cannot be charged1. The product input interface is not connected well, and the charging indicator light is off.Reconnect the product input interface.
2. The connection is good, but the charging indicator does not light.The charger is damaged. Contact after-sales service.
3. The charging indicator is on, but cannot be charged.If the product is damaged, please contact after-sales service.
The product cannot be output1. The main battery and the extra battery are not properly connected.Connect the main battery and extra battery correctly.
2. The battery is too low.Use the main battery with a charger to charge it.
3. The power of the equipment exceeds the scope of application of this product.Replace the product with a larger power battery or reduce the load power.
The output is interrupted during use1. The power of the equipment exceeds the scope of this product.Replace the product with a larger specification.
2. The power of the device is too small, causing the product to fail to identify. Automatically turn off the output.Restart.
3. Tried all of the above and failed to eliminate the fault.The product is damaged, please contact the after-sales service.

9. Warnings and Safety Precautions

Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

  • Do not use other electronic products that exceed the battery specifications to avoid electric shock and product damage.
  • Do not use damaged output cables or plug-in terminals.
  • Keep the battery dry; do not place it in water or damp places.
  • Do not insert foreign objects into the input and output ports.
  • Prevent the product from falling from a height.
  • Do not use the product in environments with excessively high or low temperatures, as this may cause product function failure, shorten lifespan, or damage.
  • Do not expose the product to fire or temperatures higher than 140°F (60°C), as this may cause the product to catch fire, explode, or lead to other safety accidents.
  • Do not expose the battery to rain, snow, frost, grease, or other harsh environments, which may cause product failure, shorten its lifespan, or damage.
  • Do not attempt to disassemble the battery or allow non-professional technical personnel to disassemble it. This may lead to unknown risks such as electric shock, fire, or explosion.
  • Keep away from children to reduce possible risks.
  • In extreme conditions, battery leakage may occur. If your hands or other exposed body parts come into contact with battery fluid, wash them immediately with soap and water. If fluid gets into your eyes, rinse them with cold water for at least 10 minutes and seek medical attention immediately.

Toxic and Harmful Substances:

The product complies with RoHS standards. The table below indicates the presence of toxic and harmful substances:

Product NamePbHgCdCr(VI)PBBPBDE
Power station000000

Note: '0' indicates that the content of the hazardous substance in all materials of the part is below the limit requirement of the 2002/95/EC (RoHS) standard.

10. Warranty and Support

Warranty Information:

  • The VTOMAN Jump 1500 Extra Battery comes with a 24-month warranty.
  • The warranty period begins from the date of purchase by the original customer.
  • For warranty service due to quality issues, customers must provide proof of purchase or other valid information.

Customer Service:

  • Customer Service Email (US): service.us@vtoman.com
  • Customer Service Email (Europe): service.eu@vtoman.com

© 2024 VTOMAN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.