1. Introduction
The ABUS Gamechanger 2.0 is a high-performance aerodynamic cycling helmet designed for competitive racing and optimal rider comfort. This manual provides essential information for the safe and effective use, maintenance, and care of your helmet.

2. Safety & Warnings
WARNING! No helmet can prevent all head injuries. Even in low-speed accidents, serious injury or death can occur. For best protection, the helmet must be fitted and attached properly to the head in accordance with the fitting instructions. Destroy and replace the helmet after impact. Protection may not be adequate in future impacts as damage can be invisible. Do not clean with solvents, bleaches and strong detergents. They can damage the helmet, sometimes invisibly. Use mild soap and water only. Read the instruction manual for more specific care and cleaning information.
Warning! This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets strapped with the helmet.
WARNING: To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
Recycling Information

3. Setup
Choosing a Comfortable Helmet and Measuring Your Size
The ABUS Gamechanger helmet is designed for professional racing competitions and features aerodynamic advantages. Since head shapes and sizes vary, finding the right fit is crucial. Use the following methods to determine your helmet size:

Method One: Head Circumference
Wrap a soft tape measure around your head, passing from the forehead to above the ears, over the back, and lying flat against the head to determine the head circumference.
Method Two: Inner Dimensions
- Inner Width: Straight line length above the left and right ears.
- Inner Length: Straight line length from the forehead to the back of the head.
Gamechanger 2.0 Suitable Head Circumference:
- Size S: Approximately [51-55cm] head circumference, inner width approximately: 16cm, inner length: 21cm.
- Size M: Approximately [54-58cm] head circumference, inner width approximately: 16.5cm, inner length: 22cm.
- Size L: Approximately [57-61cm] head circumference, inner width approximately: 17cm, inner length: 22.5cm.

Correct Way of Wearing
Ensure the helmet is positioned correctly on your head, covering your forehead, and the straps are adjusted snugly under your chin without being too tight. The Y-shaped webbing should sit comfortably below your earlobes.

Adjustment System
The helmet features a high-precision Zoom Ace Pro adjustment system for a comfortable and stable fit. This system allows for multi-directional adjustment and is compatible with ponytails, increasing the adjustable range for different head shapes.


4. Operating
Aerodynamic Performance
The Gamechanger 2.0 features an aerodynamic design optimized for various riding positions:
- Aero Blade System: Optimizes aerodynamics, improving cooling at low speeds and reducing drag at high speeds.
- Optimized for Tour Position: Designed to minimize drag when riding in a touring position.
- Optimized for Sprint Position: Designed to minimize drag when riding in a sprint position.

Ventilation System
The helmet incorporates an Aerospace Streamlined Structure Ventilation System to ensure optimal airflow and heat dissipation:
- AirBoost Vents: 32% larger ventilation area for superior airflow and heat dissipation.
- Forced Air Cooling: Combined AirBoost and forced-air cooling boost ventilation by 12%.
- Aero Blade allows air to flow in at lower speeds to achieve cooling effects and regulate head temperature during long-distance travel and steep climbs.

Eyewear Dock (AirPort)
The helmet features an integrated AirPort glasses frame rail for convenient and secure storage of your eyewear.
5. Maintenance
To ensure the longevity and effectiveness of your helmet, follow these maintenance guidelines:
- Cleaning: Do not clean with solvents, bleaches, or strong detergents. These can damage the helmet, sometimes invisibly. Use mild soap and water only.
- Inspection: Regularly inspect your helmet for any signs of damage, such as cracks, dents, or worn straps.
- Impact: If the helmet sustains an impact, even if no visible damage is present, it should be destroyed and replaced immediately. Internal damage may compromise its protective capabilities in future impacts.
6. Troubleshooting
No specific troubleshooting steps are provided in the available documentation. If you encounter any issues with your helmet, please refer to the manufacturer's contact information in the Warranty & Support section.
7. Specifications
| Feature | Description |
|---|---|
| Model Number | Gamechanger |
| Certification | CE (EN 1078-2012+A1-2012) |
| Air Vents | < 8 |
| Type | Integrally-molded Helmet |
| Material | EPS/PC shell |
| Weight (M) | 275g (±10g) |
| Weight (L) | 285g (±10g) |
| Age Group | Adults (Men) |
| Origin | Italy |
| Size S | 51-55cm / 20.07-21.65inch |
| Size M | 54-58cm / 21.25-22.83inch |
| Size L | 57-61cm / 22.44-24.01inch |
| Key Features | Aerodynamic Design, Full coverage PC case, Semi-enclosed plastic ring adjustment system, Top honeycomb structure, AirPort glasses frame rail, Compatible with ponytails. |
| MIPS Technology (for MIPS version) | Reduces rotational impact forces by 10-15mm in any direction, enhancing protection during crashes. |

8. User Tips
- Handle with Care: While the helmet itself is robust, some users have noted that the packaging might not always withstand rough handling during shipping. Inspect your helmet upon arrival for any damage.
- Authenticity: Be assured that this is an original ABUS product, designed with high standards for safety and performance.
- Clasp Type: The helmet typically features a standard clasp. If you are expecting a magnetic clasp, please verify the specific model variant.
9. Warranty & Support
Manufacturer Information
- Manufacturer: Abus (Hong Kong) Limited
- EU Authorized Representative: Unit H, 11/F., Valiant Industrial Centre 2-12 Au PuiWanStreet, Fotan Shatin
- Email: 95629381@qq.com
- Telephone: 86-18969926626
Compliance
This product complies with the following standard:
