1. Introduction
Thank you for purchasing the IRALAN LED Petal Ceiling Chandelier Smart Lamp. This modern and versatile lighting fixture is designed to enhance the ambiance of your living spaces with its unique petal design and smart control features. Please read this manual thoroughly before installation and use to ensure safe operation and optimal performance. Keep this manual for future reference.
2. Safety Information
- Always turn off the main power supply before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure the mounting surface can support the weight of the fixture.
- Do not connect the fixture to an ungrounded electrical system.
- Avoid looking directly into the LED light source when it is illuminated.
- Keep the product away from water and high humidity environments.
- Do not attempt to modify or repair the fixture yourself. Contact qualified personnel for service.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

Figure 1: Overview of components for assembly.
- Ceiling Plate (main base)
- Petal-shaped light panels (10 pieces)
- Short tubes (7 pieces)
- Long tubes (3 pieces)
- Nuts and bolts for assembly
- Remote Control
- LED Driver/Controller
- Mounting hardware (screws, anchors)
4. Setup and Installation
Follow these steps for assembling and installing your LED Petal Ceiling Chandelier. For a visual guide, please refer to the assembly video below.
Video 1: Detailed assembly and installation guide.
Assembly Steps:
- Open the box and take out all the components.
- Place all the components on a clean and flat table.
- Assemble the short tubes to the panels. The short threaded end of the tubes goes into the panels (7 panels).
- Assemble the long tubes to the panels. The short threaded end of the tubes goes into the panels (3 panels).
- Assemble the panels with long tubes to the middle part of the plate.
- Set the panels to the plate with nuts.
- Assemble all the 3 panels with long tubes to the plate.
- Assemble the panels with short tubes to the marginal part of the plate.
- Set the panels to the plate with nuts.
- Fasten the panels with the wrench.
- Connect all the wires to the collector. Pay attention to the correct direction (there is a minor ridge on each wire, this is the up side).
- Assemble flat-headed bolts to the cross with nuts in, but don't lock up yet.
- Put down the cross, make sure all the bolts can go through the four small holes at the plate, then take it out and fasten the nuts.
- Install the cross to the ceiling with sharp pointed screws using an electric drill. Do not move the flat-headed bolts.
- Lift up the light and install it to the cross. The four flat-headed bolts go through the plate, and fasten with the nuts as shown.
5. Operating Instructions
5.1 Remote Control Operation
The remote control allows for easy adjustment of light settings. Note: Pairing has been completed at the factory; no operation is required for initial use.

Figure 2: Remote Control Layout
- Turn On: Press to turn the light on.
- Turn Off: Press to turn the light off.
- Brightness +: Increase brightness.
- Color Temperature -: Decrease color temperature (move towards warmer light).
- Color Temperature +: Increase color temperature (move towards cooler light).
- Pairing Button (SETUP): Used for pairing if needed (factory paired). Click within 5 seconds of turning on the light.
- Brightness -: Decrease brightness.
- Color Temperature Change: Cycles through preset color temperatures.
- Full/Half Bright: Quickly switches brightness to 50% or 100% of natural light.
- Sleep Mode: Activates a weak light (7% brightness) suitable for sleeping.
- Fully Bright: Sets the light to maximum brightness.
5.2 APP Operation (LampSmart Pro)
Control your chandelier conveniently via the LampSmart Pro mobile application.
- Download the APP: Scan the QR code below or search for "LampSmart Pro" in your app store.

Figure 3: LampSmart Pro APP QR Code
- Open the APP: Select a room, then click on the '+' icon to add a new device. Enter the equipment name (e.g., "Living Room Light") and confirm.
APP Functions:
- Code Matching: If pairing is lost, click the code matching button within 5 seconds of turning on the light. A flash or 'di' sound indicates successful pairing.
- Timer Function: Set a time to regularly turn off the device.
- Low Brightness Mode: Activates white and yellow light at 10% of maximum brightness.
- Maximum Brightness Mode: Activates white and yellow light at maximum brightness.
- Yellow Light Only: Activates only yellow light at maximum brightness.
- White Light Only: Activates only white light at maximum brightness.
6. Features
- Modern Petal Design: A unique and novel aesthetic that complements contemporary home decor.
- Adjustable LED Lighting: Equipped with high-quality LED lights offering 3 color temperatures (3000K Warm Yellow, 4500K Natural Light, 6500K Cold White) and stepless dimming from 0% to 100% brightness.
- Smart Control: Conveniently adjust settings via the included remote control or the LampSmart Pro mobile application.
- Eye Protection & No Flicker: Designed to provide stable, flicker-free illumination, reducing eye strain.
- High Color Rendering: Features a Color Rendering Index (CRI) of 80+ and Ra98, ensuring colors appear vivid and natural. Complies with TM-30 light standard with stricter color rendering index control (SDCM < 5, Rf ≥ 98, Rg ≥ 100).
- Durable Construction: Built with a metal chassis for better support and heat dissipation, and an acrylic lampshade for bright yet non-dazzling light.
- Versatile Application: Ideal for various rooms including kitchen, dining room, bedroom, foyer, study, exhibition hall, corridor, and balcony.




7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | YH4 |
| Item Type | Ceiling Lights |
| Style | Modern Style |
| Installation Method | Assembly, Surface mounted |
| Body Material | Ironware + Acrylic |
| Light Source | LED bulbs |
| Is Bulbs Included | No (Integrated LED) |
| Is Dimmable | Yes |
| Switch Type | Remote Control |
| Is Smart Device | Yes (APP Control) |
| Power Source | AC |
| Voltage | 90 - 260 V |
| Luminous Flux | 2000-82000 LM (Specific model: 7600LM for 95W) |
| Wattage | 95W (for 10-head model) |
| Lighting Area | 5-10 square meters (Specific model: 10-20M² for 95W) |
| Dimensions (Diameter x Height) | 76cm x 12cm (approx.) |
| Certification | CCC, CE |
Note: Specific luminous flux and lighting area may vary slightly based on the exact configuration (e.g., number of heads).

Figure 4: Product Dimensions and Key Specifications
8. Maintenance
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If the LEDs fail, the entire fixture may need servicing or replacement.
- Regular Checks: Periodically check all connections and mounting hardware to ensure they are secure.
9. Troubleshooting
- Light does not turn on:
- Check if the main power supply is on.
- Ensure all electrical connections are secure.
- Verify the remote control batteries are not depleted.
- Remote control not responding:
- Replace the remote control batteries.
- Ensure there are no obstructions between the remote and the light.
- If necessary, re-pair the remote control by pressing the 'SETUP' button within 5 seconds of turning on the light.
- APP connection issues:
- Ensure your smartphone's Bluetooth is enabled and within range.
- Restart the app and try connecting again.
- If the issue persists, try re-pairing the device through the app's add device function.
- Flickering or inconsistent light:
- Check for loose wiring connections.
- Ensure the power supply is stable and within the specified voltage range (90-260V).
10. User Tips
- Experiment with Color Temperatures: Use warmer light (3000K) for relaxing evenings and cooler light (6500K) for tasks requiring focus.
- Utilize Sleep Mode: The 7% brightness sleep mode is perfect for a subtle night light without disturbing sleep.
- Smart Home Integration: While not explicitly stated, many smart devices can be integrated with broader smart home systems. Check the LampSmart Pro app for potential integrations.
11. Warranty and Support
This product comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical support, warranty claims, or any questions regarding your IRALAN LED Petal Ceiling Chandelier, please contact the seller or the manufacturer's customer service.
An additional user manual in PDF format is available for download: View User Manual (PDF)