1. Introduction
Thank you for choosing the ZEALOT-S51 PRO Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read it thoroughly before use.

Image: ZEALOT-S51 PRO Bluetooth Speaker, showing its cylindrical design with control buttons on the side and an illuminated top.
2. Package Contents
Please check the box for the following items:
- ZEALOT-S51 PRO Wireless Speaker x 1
- USB-C Charging Cable x 1
- Quick Start Guide x 1
3. Controls and Indicators
Familiarize yourself with the speaker's buttons and indicators:

Image: Close-up of the ZEALOT-S51 PRO speaker showing the vertical row of control buttons: Power, Mode (M), Play/Pause, Volume Up (+), Volume Down (-), and Light (💡) button.
- Power Button (⏻): Press and hold to power on/off.
- Mode Button (M): Press to switch between Bluetooth, AUX, TF Card, and USB modes. Press and hold for TWS pairing.
- Play/Pause Button (▷||): Press to play or pause music.
- Volume Up Button (+): Press to increase volume. Press and hold for next track.
- Volume Down Button (-): Press to decrease volume. Press and hold for previous track.
- Light Button (💡): Press to cycle through light modes. Press and hold to turn lights on/off.
- LED Indicator: Shows power status, charging status, and Bluetooth connection status.
4. Setup
4.1 Initial Charge
For the first use, it is recommended to fully charge the speaker. Connect the provided USB-C cable to the speaker's charging port and the other end to a USB power adapter (DC 5V). The LED indicator will show red while charging and turn off when fully charged. The charger should deliver between 7.5W and 15W for optimal charging.
4.2 Power On/Off
- To Power On: Press and hold the Power Button (⏻) for more than 2 seconds. The LED indicator will flash.
- To Power Off: Press and hold the Power Button (⏻) for more than 2 seconds.
5. Operating Instructions
5.1 Bluetooth Pairing
- Ensure the speaker is powered on and the LED indicator is flashing, indicating it's in pairing mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select