PARKSON retro wall lamp

Contents

PARKSON Retro Wood Wall Lamp User Manual

Model: Retro Wall Lamp

Brand: PARKSON

1. Introduction

Thank you for purchasing the PARKSON Retro Wood Wall Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new wall lamp. Please read these instructions carefully before use and retain them for future reference.

This retro-style wall lamp features a combination of wood and iron, designed to complement various indoor settings such as kitchens, dining rooms, bedrooms, foyers, and studies. It is compatible with E27 base bulbs and supports 110V/220V AC power.

2. Safety Warnings

Failure to follow these safety instructions may result in fire, electric shock, or other injuries.

  • Only use a power supply that matches the rated voltage (AC 110V/220V, 90-260V) to prevent damage or fire caused by overvoltage or undervoltage.
  • Disconnect the power supply before installation, maintenance, or bulb replacement. Never operate the device while it is powered on.
  • Do not use the product in damp, high-temperature, or flammable/explosive environments.
  • Keep the product out of reach of children to prevent accidental ingestion or contact with electrical components.
  • Ensure all electrical connections are secure and comply with local electrical codes. If unsure, consult a qualified electrician.

3. Package Contents

Please check the package contents upon receipt. If any parts are missing or damaged, contact customer support.

  • Wall lamp fixture (wood and iron components)
  • E27 lamp holder with approximately 85cm surround cable
  • Mounting hardware (screws, wall anchors)
  • Note: Light bulbs are NOT included.

4. Specifications

Product dimensions and specifications

Figure 1: Product Dimensions and Parameters

Feature Specification
Model Numberretro wall lamp
Brand NamePARKSON
Item TypeWall Lamps
MaterialWood, Iron
Body MaterialWood
Shade TypeIron
Shade DirectionUp & Down
Color OptionsBlack, White
Installation MethodSelf-contained, Wall Mounted
Voltage90-260V (compatible with 110V, 220V AC)
Power SourceAC
Base TypeE27 (Wedge)
Number of Light Sources1
Is Bulbs IncludedNo
Light Source CompatibilityIncandescent Bulbs (and compatible LED bulbs)
Luminous Flux249-2000 (Lumens, depending on bulb)
Is DimmableYes (with compatible dimmable bulb and switch)
Switch TypeKnob switch, Touch On/Off Switch (external)
Lighting Area5-10 square meters
ApplicationKitchen, Dining Room, Bed Room, Foyer, Study, Living Room, Bedside
StyleModern Style, Retro
TechnicsPainted
CertificationCCC, CE, ROHS
Package Weight0.426 kg
Package Dimensions21cm (L) x 13cm (W) x 7cm (H)
Black and white lamp versions with dimensions and 'Without Bulbs' note

Figure 2: Available Colors and Bulb Compatibility Note

5. Setup and Installation

Before beginning installation, ensure you have read and understood all safety warnings. Professional installation is recommended if you are not familiar with electrical wiring.

5.1 Tools Required (Not Included)

  • Screwdriver
  • Drill (if mounting to drywall/masonry)
  • Wire strippers
  • Voltage tester
  • Pencil
  • Measuring tape

5.2 Installation Steps

  1. Turn off Power: Locate the circuit breaker controlling the light fixture you are replacing or installing and turn off the power. Verify power is off with a voltage tester.
  2. Prepare Mounting Surface: Mark the desired mounting location on the wall. The lamp base dimensions are approximately 6.30 inches (160mm) in height and 2.55 inches (60mm) in width (refer to Figure 1).
  3. Mount the Base: Secure the lamp's mounting plate to the wall using the provided screws and wall anchors. Ensure it is firmly attached.
  4. Route the Cable: Carefully route the lamp holder cable through the wooden block as shown in Figure 3. The cable is designed to wrap around the wooden block for a decorative and secure fit.
    Cable routed through the wooden block

    Figure 3: Cable Routing through Wooden Block

  5. Wire Connections: Connect the lamp's electrical wires to your household wiring. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Ensure all connections are secure and insulated. Refer to Figure 4 for a visual guide on connecting the lamp holder cable.
    Wiring connection point for the lamp holder cable

    Figure 4: Lamp Holder Cable Wiring Connection

  6. Secure Lamp Holder: Once wired, ensure the lamp holder is securely positioned.
  7. Install Bulb: Screw an E27 base bulb (not included) into the lamp holder. Ensure the bulb wattage does not exceed the lamp's maximum rating (if specified, otherwise use standard E27 bulbs).
  8. Restore Power: Turn the power back on at the circuit breaker.
  9. Test: Test the lamp to ensure it functions correctly.
Close-up of wood and iron components with E27 lamp holder

Figure 5: Wood & Iron E27 Lamp Holder Detail

6. Operating Instructions

The PARKSON Retro Wood Wall Lamp is designed for simple operation.

  • Power On/Off: Use the wall switch (Knob switch or Touch On/Off Switch, depending on your home's wiring) to turn the lamp on or off.
  • Dimming (Optional): If you have installed a dimmable E27 bulb and your wall switch supports dimming, you can adjust the light intensity using your dimmer switch.

7. Maintenance

  • Cleaning: Disconnect power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Bulb Replacement: Disconnect power before replacing the bulb. Allow the old bulb to cool completely before removing. Screw in a new E27 base bulb, ensuring it is securely seated.
  • Inspection: Periodically check the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power and consult a qualified electrician.

8. Troubleshooting

  • Lamp does not light up:
    • Check if the power supply is on.
    • Ensure the bulb is correctly installed and not faulty.
    • Verify all wiring connections are secure.
    • Confirm the voltage matches the lamp's requirements.
  • Flickering light:
    • Ensure the bulb is fully screwed in.
    • If using a dimmable bulb, ensure it is compatible with your dimmer switch.
    • Check for loose wiring connections.
  • Missing parts upon arrival:
    • Carefully check all packaging materials. If a lamp holder or mounting base is genuinely missing, contact customer support immediately.
  • Product arrived damaged:
    • Inspect the product immediately upon delivery. If damaged, document with photos and contact customer support.

9. User Tips

  • Customization: The wooden components can be stained or painted to match your interior decor. For example, applying a dark wood stain can give the lamp a more elegant finish. Ensure any finishes are dry and non-conductive before reassembling or powering on the lamp.
    Wooden blocks and paint for customization

    Figure 6: Example of Wooden Components for Customization

  • Aesthetic Appeal: Experiment with different E27 bulb styles (e.g., Edison bulbs, clear globe bulbs) to achieve various aesthetic effects and lighting moods.

10. Warranty and Support

This PARKSON product comes with a 3-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For detailed diagrams, further instructions, or technical support, please refer to the official User Manual (PDF) available online:

View User Manual (PDF)

11. Frequently Asked Questions (FAQ)

Q: Does the lamp run on batteries or is it plugged in with cables?
A: The lamp is designed for AC power and requires direct wiring to your home's electrical system. It does not run on batteries.

© 2024 PARKSON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.