Aramox ARH-403

Contents

Aramox ARH-403 Air Conditioner Remote Control User Manual

Model: ARH-403 | Brand: Aramox

Introduction

This manual provides detailed instructions for the use and maintenance of your Aramox ARH-403 replacement remote control for Samsung air conditioning units. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

The ARH-403 remote control is designed to provide seamless control over your Samsung air conditioner, offering essential functions such as mode selection, temperature adjustment, fan speed control, and timer settings. It operates using infrared (IR) wireless communication.

Safety & Warnings

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device out of reach of children.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Do not expose the remote control to water or moisture.
  • Do not mix old and new batteries, or different types of batteries.
  • Remove batteries if the remote control will not be used for an extended period.

Product Overview

The Aramox ARH-403 remote control is a direct replacement, designed for immediate use without complex programming. It features a clear LCD display and ergonomically placed buttons for easy access to all functions.

Close-up of Aramox ARH-403 remote control buttons and screen
Figure 1: Close-up view of the remote control's buttons and LCD screen.
Hand holding remote control pointing at an air conditioner unit
Figure 2: The remote control in action, sending signals to an air conditioner.

Setup

  1. Battery Installation: Open the battery compartment cover on the back of the remote control. Insert two AAA batteries (not included), ensuring the correct polarity (+/-) as indicated inside the compartment. Close the cover securely.
  2. Initial Use: The remote control is pre-programmed for compatible Samsung air conditioners. After installing batteries, it can be used directly without any additional setup or pairing.
Remote control with text indicating 'Install the battery, can be used directly, without setting'
Figure 3: The remote control requires only battery installation for immediate use.

Operating Instructions

Point the remote control directly at the air conditioner's receiver when operating.

  • Power On/Off: Press the Power button (often combined with Set/Cancel) to turn the air conditioner on or off.
  • Mode Selection: Press the Mode button to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • Temperature Adjustment: Use the Up (▲) and Down (▼) arrow buttons to increase or decrease the desired temperature.
  • Fan Speed: Press the Fan button to adjust the fan speed (e.g., Low, Medium, High, Auto).
  • Turbo Function: Press the Turbo button for rapid cooling or heating.
  • Swing Function: Use the Swing button to control the louver movement for air distribution.
  • Timer Settings: Use the On Timer and Off Timer buttons to set specific times for the air conditioner to turn on or off automatically. Follow the on-screen prompts to set the desired time.

Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's range decreases or the display becomes dim. Always replace both batteries at the same time.
  • Storage: Store the remote control in a dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for an extended period to prevent leakage.

Troubleshooting

Remote is not responding:
Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary. Ensure there are no obstructions between the remote and the air conditioner's receiver.
Limited operating range:
Ensure the remote is pointed directly at the air conditioner. Replace batteries if the range has significantly decreased. The effective remote distance is typically greater than 10 meters, but can vary based on the specific air conditioner model and environmental factors.
Display is dim or blank:
This usually indicates low battery power. Replace the batteries.

Specifications

Feature Specification
Model Number ARH-403
Brand Name Aramox
Use Air Conditioner
Wireless Communication IR (Infrared)
Origin Mainland China
Certification CE
Package Yes
Remote Distance Greater than 10 meters (varies by machine)
Dimensions (L x W x H) 11.5 cm x 4.7 cm x 2 cm (approximate)
Weight 0.047 kg (approximate)
Batch/Serial Number 13564826455
Side view of the remote control with dimensions labeled
Figure 4: Approximate dimensions of the remote control.

User Tips

  • For optimal performance, ensure a clear line of sight between the remote and the air conditioner.
  • Keep the remote control away from strong light sources, which can interfere with the infrared signal.
  • If you have multiple air conditioners, ensure you are pointing the remote at the correct unit to avoid unintended operation.

Warranty & Support

For detailed warranty information and customer support, please refer to the official product documentation provided by the seller. A user manual in PDF format is available for download, which may contain additional information:

View User Manual (PDF)

Please retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.