Introduction
Thank you for choosing the ECHTPower Wireless Game Controller EP01. This manual provides detailed instructions on how to set up, operate, and maintain your controller to ensure the best gaming experience across multiple platforms including PC, Nintendo Switch, Android, and iOS.
Video Description: An official product video showcasing the ECHTPower Wireless Game Controller's multi-platform compatibility, adjustable vibration, turbo function, and battery life.
Packing List
- Wireless Controller x1
- Charging Cable x1
- Receiver x1
- Instruction Manual x1
Compatibility
The ECHTPower EP01 Wireless Game Controller is compatible with a wide range of platforms:
- PC
- Nintendo Switch / Switch 2
- Android devices
- iOS devices
- Steam Deck
Image Description: A diagram illustrating the controller's universal compatibility with various devices including PC, Nintendo Switch, Steam Deck, iOS, and Android, highlighting Bluetooth, 2.4G wireless, and wired connection options.
Controller Button Map
Familiarize yourself with the layout of your ECHTPower EP01 controller:
Image Description: Front view of the white ECHTPower Wireless Game Controller with its USB wireless dongle. The controller features two analog sticks with RGB lighting, a D-pad, A/B/X/Y buttons, Home, Share, Start, Back, and M buttons.
Image Description: A detailed diagram of the controller's buttons. Top View: Left Joystick/L3, D-pad, Back Button, Home Button, Start Button, Share Button, A/B/X/Y Buttons, M Button, Right Joystick/R3. Front View: RB Button, LB Button, RT Button, LT Button, Type-C Charging port. Rear View: Reset Button, Mode Switch.
Setup and Connection
Connecting to Computer (PC)
1. Wireless Receiver Connection
- Plug the receiver into an available USB port on your computer.
- Set the mode switch on the back of the controller to the PC icon.
- Press the Home button. The controller will automatically connect, and the light will turn green.
- To reconnect later, simply press the Home button.
2. Wired Connection
- Set the mode switch on the back of the controller to the PC icon.
- Connect the controller to your PC using the provided USB-C cable.
- The connection is successful when the green light is illuminated.
3. Bluetooth Connection
- Set the mode switch on the back of the controller to the Bluetooth icon.
- Press and hold the Home button until the green light flashes quickly.
- On your computer, enable Bluetooth and connect to the device named "Xbox Wireless Controller".
- Note for Dinput Mode: If connecting to PC via Bluetooth, press and hold the Back and Start buttons simultaneously to switch to Dinput mode for retro emulator games. The yellow light will blink. You may need to reconnect the computer for the first time Dinput connection.
Connecting to Nintendo Switch
- On your Nintendo Switch, navigate to the Home menu, select "Controllers", then "Change Grip/Order".
- Set the mode switch on the back of the controller to the NS icon.
- Press and hold the Home button until the white indicator light blinks quickly.
- Follow the on-screen prompts on your Switch to complete the connection. The white indicator light will remain solid upon successful connection.
- To reconnect later, simply press the Home button to automatically connect and wake up your Switch.
Connecting to iOS Devices
- Set the mode switch on the back of the controller to the Bluetooth icon.
- Press and hold the Home button for 3 seconds. The green light will blink quickly. (If the yellow light is blinking, press and hold Back + Start until the green light blinks).
- On your iOS device, enable Bluetooth and connect to the device named "Xbox Wireless Controller".
- The green indicator light on the controller will turn on upon successful connection.
- To reconnect later, simply press the Home button.
Connecting to Android Devices
- Set the mode switch on the back of the controller to the Bluetooth icon.
- Press and hold the Home button for 3 seconds. The green light will blink quickly. Then press and hold Back + Start until the yellow light blinks quickly.
- On your Android device, enable Bluetooth and connect to the device named "ECHTPower EP01".
- The yellow indicator light on the controller will turn on upon successful connection.
- To reconnect later, simply press the Home button.
Operating Instructions
Basic Functions
- Power On: Press the Home button.
- Power Off: Switch the back mode switch to OFF, or the controller will automatically shut down after 30 minutes of inactivity.
- Low Battery: The Home button indicator will blink red slowly.
- Charging: The Home button indicator will blink slowly.
- Reset: Insert a sim-card tool or a thin pin into the reset hole on the back of the controller.
Turbo Function
The Turbo function allows for rapid, repeated input of a button press.
- Supported Buttons: A, B, X, Y, D-pad, LB, RB, LT, RT.
- Manual Turbo: Press the M button and then the desired button to activate manual turbo.
- Auto Turbo: With manual turbo active on a button, press the M button and that same button again to activate auto turbo.
- Disable Turbo: With auto turbo active on a button, press the M button and that same button again to disable turbo function.
- Turbo Speed Adjustment: Press and hold the M button, then push the Left Joystick left/right to cycle through fast, medium, or slow turbo speeds. The light will blink according to the set speed.
Image Description: A graphic illustrating the three-level turbo speed feature, showing a game scene with an explosion and the controller's turbo button highlighted.
Vibration Adjustment
The controller features adjustable vibration feedback.
- Press and hold the M button, then push the Left Joystick up/down to adjust the vibration level. Options include Strong, Medium, Weak, and Off.
Image Description: A visual representation of the adjustable vibration feature, showing the controller with internal motors vibrating, indicated by blue wave lines.
Brightness Adjustment (RGB Ring)
The RGB lighting around the joysticks can be adjusted.
- Press and hold the M button, then push the Right Joystick up/down to increase or decrease the RGB ring brightness. Options include Strong, Medium, Weak, and Off.
Light Mode Adjustment (RGB Ring)
The RGB lighting offers various display modes and color options.
- Change RGB Mode: Press and hold the M button, then press R3 (push down the Right Joystick) to cycle through RGB modes: Trigger-tracing, Solid, Breathing, Flowing.
- Trigger-tracing Mode: In this mode, RGB brightness changes based on the corresponding trigger input.
- Change RGB Color: In any mode (except Flowing mode), press and hold the M button, then push the Right Joystick left to cycle through colors: Colorful, Red, Orange, Yellow, Green, Cyan, Blue, Purple, and Off.
Nintendo Switch Mode Key Mapping
When operating in Nintendo Switch mode, the controller's buttons are mapped as follows:
- Controller's A button = Switch's B button
- Controller's B button = Switch's A button
- Controller's X button = Switch's Y button
- Controller's Y button = Switch's X button
- Controller's Home button = Switch's Home button
- Controller's Share button = Switch's Screenshot button
- Controller's Start button = Switch's + button
- Controller's Back button = Switch's - button
Specifications
| Battery Capacity | 800mAh |
| Charging Voltage/Current | 5V/0.75A |
| Battery Charging Time | 2-3 hours |
| Usage Time | Up to 15 hours |
| Receiver/Wired Report Rate | 1000Hz |
| Bluetooth/NS Report Rate | 125Hz |
| Trigger Button Type | Hall-Linear |
| Joystick Sensor Module Brand/Type | K-SLIVER |
| Compatible Platforms | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS |
Maintenance and Safety
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Small Parts: This product contains small detachable parts. Keep it away from children under 3 years old to prevent choking hazards.
- Heat and Moisture: Do not use or store this product near fire, in humid environments, or in direct contact with water.
- Disassembly: Do not attempt to disassemble or modify the product. Unauthorized modifications may void the warranty and cause damage.
- Intended Use: Use this product only for its intended purpose as a game controller.
- Disposal: Dispose of the product and its parts according to local environmental laws and guidelines. Do not dispose of it as household waste.
Troubleshooting
- Controller Not Connecting: Ensure the controller is fully charged. Verify the correct mode switch setting for your device (PC, NS, Bluetooth). Try resetting the controller using the reset hole.
- Input Lag or Disconnections: Ensure you are within range of your device. For wireless connections, minimize interference from other wireless devices. For PC, try a wired connection to rule out wireless issues.
- Buttons Not Responding: Try resetting the controller. Ensure no debris is lodged around the buttons.
- Vibration Not Working: Check the vibration adjustment settings (M button + Left Joystick up/down) to ensure it's not set to 'Off'.
- Lights Not Working: Check the brightness and light mode adjustment settings (M button + Right Joystick up/down or R3).
Warranty and Support
For technical support, warranty information, or any inquiries regarding your ECHTPower Wireless Game Controller EP01, please contact us through the following channels:
- Phone: 0755-21010839
- Email: service@echtpower.com
- Website: www.echtpower.com
- Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
- Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen