1. Introduction
This Uxcell Outboard Half Motor Engine Cover is a non-OEM accessory designed to protect your outboard motor. It is made from durable 210D Oxford Cloth with an inner PVC coating, making it water-resistant, UV-resistant, lightweight, and portable. The cover is equipped with a bottom drawstring to ensure a secure fit, safeguarding your motor from environmental elements and extending its service life.
It effectively prevents fading and cracking on the motor from exposure to sun, rain, and wind. The good density material blocks dust from entering the motor's interior, and its reflective performance helps protect the motor's color from fading. The waterproof design ensures rainwater and seawater do not penetrate, keeping your motor dry.
This cover is easy to install and remove without tools, featuring an elastic rope sewn into the bottom hem for a quick and secure fit.
2. Safety Information and Warnings
WARNING!
Read carefully to avoid injury, damage, or product failure:
- Do not use while the motor is running (risk of fire/melting).
- Install only when the motor is cool and dry (prevents damage/corrosion).
- No modification (reduces protection, voids certification).
- Keep away from open flames/high-temperature objects (fire risk).
- Drawstring poses strangulation hazard; keep away from children/pets.
- Do not cover other objects (e.g., fuel tanks, batteries).
- Replace damaged covers immediately (loss of protection).
- Check fit in strong wind; re-tighten drawstring if loose.
- Not a substitute for regular motor maintenance.
CE Compliance
This product complies with the following EU Directives and Harmonized Standards:
- Applicable EU Directives: 2014/30/EU (EMC, 26 Feb 2014); 2014/35/EU (LVD, 26 Feb 2014)
- Harmonized Standards: EN 55014-1:2017, EN 55014-2:2017, EN 61000-3-2:2019, EN 61000-3-3:2013, EN ISO 12944-2:2017
3. Product Features
- All-Weather Protection: Shields motors from rain, snow, dust, UV rays; prevents corrosion and damage.
- Durable & Water-Resistant: Made of 210D Oxford Cloth with PVC coating for long-lasting use and water repellency.
- Secure Fit: Features a bottom drawstring to resist wind blow-off and ensure a snug fit.
- Lightweight & Portable: Easy to fold, carry, and store when not in use.
- Component Protection: Reduces maintenance costs by avoiding corrosion and part wear.
- Anti-Fading: Helps prevent fading and cracking of the motor from sun exposure.
- Dust Blocking: Effectively blocks dust from entering the motor's interior.
4. Specifications
| Attribute | Value |
|---|---|
| Material | 210D Oxford Cloth with inner PVC coating |
| Color | Silver Tone |
| High-concerned chemical | None |
| Width | < 60" |
| Matching Horsepower | 15HP - 250HP |
Dimensions by Horsepower (Length x Width x Height)
| HP Range | Dimensions (cm) | Dimensions (inches) |
|---|---|---|
| 15HP | 52 x 27 x 32 | 20.47 x 10.63 x 12.6 |
| 15-30HP | 56 x 30 x 40 | 22.04 x 11.81 x 15.75 |
| 30-60HP | 62 x 36 x 49 | 24.40 x 14.17 x 19.29 |
| 60-100HP | 68 x 40 x 53 | 26.77 x 15.75 x 20.87 |
| 100-150HP | 74 x 45 x 58 | 29.13 x 17.72 x 22.83 |
| 175-250HP | 82 x 50 x 60 | 32.28 x 19.68 x 23.62 |
Note: Please allow 1-3cm errors due to manual measurement.
5. Installation
This cover is a non-OEM accessory, intended for daily storage/protection only, not for use during motor operation.
- Prepare the Motor: Ensure the motor is completely clean and dry before installation. This prevents trapped moisture, which can lead to damage or corrosion.
- Drape the Cover: Carefully drape the cover evenly over the entire outboard motor. Make sure it extends down to cover the lower unit adequately.
- Secure the Drawstring: Tighten and secure the bottom drawstring for a snug fit around the motor. This helps prevent the cover from blowing off in windy conditions.
6. Usage Guidelines
The Uxcell Outboard Half Motor Engine Cover is designed for static protection of your motor. It is suitable for most outboard motor brands, including Honda, Tohatsu, Yamaha, Suzuki, and Mercury.
- Use the cover for daily storage to protect your motor from rain, snow, dust, and UV rays.
- Ensure the motor is cool and dry before covering to prevent moisture buildup and potential damage.
- Always remove the cover before operating the motor.
7. Care and Maintenance
Proper care will extend the life of your engine cover:
- Cleaning: When removing the cover, clean it if needed. Use mild soap and water, and a soft brush or cloth. Avoid harsh chemicals or abrasive materials that could damage the fabric or coating.
- Drying: After cleaning, ensure the cover is completely dry before folding and storing. This prevents mildew and odors.
- Storage: Fold the cover neatly for storage. It is lightweight and portable, making it easy to store in its included bag or a dry, cool place.
- Inspection: Regularly inspect the cover for any signs of wear, tear, or damage. Replace damaged covers immediately to ensure continued protection.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover blows off in wind | Drawstring not tightened sufficiently. | Ensure the bottom drawstring is pulled tight and securely fastened around the motor. Re-check fit periodically in strong winds. |
| Moisture/mildew under cover | Motor was not dry before covering; trapped moisture. | Always ensure the motor is completely dry before installing the cover. Allow for adequate ventilation if possible. |
| Cover appears damaged/worn quickly | Exposure to sharp objects; improper handling; prolonged extreme conditions. | Handle with care. Avoid contact with sharp edges. Replace damaged covers promptly for optimal protection. |
| Cover does not fit properly | Incorrect size selected for motor HP. | Refer to the 'Specifications' section and ensure the correct cover size is chosen for your motor's horsepower range. |
9. User Tips
- Verify Size: Always double-check the dimensions and recommended HP range to ensure you select the correct cover size for a snug and effective fit.
- Regular Cleaning: A quick rinse with fresh water and mild soap can keep the cover in top condition, especially after exposure to saltwater.
- Dry Thoroughly: Before folding and storing, ensure the cover is completely dry to prevent mold or mildew, which can degrade the material over time.
10. Warranty and Support
For specific warranty information, returns, or technical support, please refer to the seller or the platform where the product was purchased. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: View User Manual (PDF).