IKSLED DCL2025

Contents

IKSLED PIR Motion Sensor Switch User Manual

Model: DCL2025 Series

1. Introduction

Thank you for choosing the IKSLED PIR Motion Sensor Switch. This intelligent sensing switch is designed to automatically control lighting based on motion detection and ambient light conditions. Please read this manual carefully before installation and operation to ensure proper use and safety.

WARNING: Please strictly follow the instructions, safety tips and use the product with caution.

2. Product Overview

The IKSLED PIR Motion Sensor Switch (Model: DCL2025, also referred to as TDL-2025) is available in different connector types, such as USB-W and 5521-B (DC barrel connector). It features a compact design with adjustable delay time and two distinct operating modes.

IKSLED PIR Sensor Switch with DC barrel connectors

Figure 1: IKSLED PIR Sensor Switch (DCL2025-55*21-B variant)

IKSLED PIR Sensor Switch with USB connectors

Figure 2: IKSLED PIR Sensor Switch (DCL2025-USB-W variant)

Bottom and front view of the PIR sensor switch, showing Mode A and Mode B descriptions

Figure 3: Sensor Views and Operating Modes

3. Specifications

Parameter Value
Model Number DCL2025 (TDL-2025)
Brand Name IKSLED
Item Type SWITCHES
Switch Type Sensor Switch
Material Plastic
Operating Voltage DC 5V-24V
Max Wattage / Current
  • 5V: 25W (5A)
  • 12V: 60W (5A)
  • 24V: 120W (5A)
Detection Distance 5-8 meters
Detection Angle 120°
Adjustable Delay Time 18 seconds - 360 seconds
Working Modes Mode A: Human body with light control (motion + darkness)
Mode B: Only light control (darkness only)
Specification (Connector) DC 55*21 terminal or USB
Cable Length 30CM
Certification CE
Is Smart Device No
Origin Mainland China
Product parameters table with an image of the sensor

Figure 4: Detailed Product Parameters

4. Installation

4.1. Package Contents

Your package should include:

  • 1x PIR Motion Sensor Switch (DCL2025 series)
  • 1x Screw for mounting
  • 1x Double-sided adhesive sticker
PIR sensor switch with included screw and double-sided adhesive for installation

Figure 5: Installation Accessories

4.2. Mounting Options

You can choose between two installation methods:

  1. Screw Fixing: Use the provided screw to securely mount the sensor via the screw fixing hole on the back.
  2. Adhesive Mounting: Use the provided double-sided adhesive sticker to attach the sensor to a clean, dry surface.

4.3. Wiring Diagram

Please install the switch according to the circuit diagram below. Ensure correct polarity (positive and negative) when connecting to your power supply and LED strip.

Detailed view of the sensor's back, showing input and output ports, and delay adjustment screw

Figure 6: Sensor Connections and Delay Adjustment

The 'IN' port connects to the DC power supply (DC 5V-24V). The 'OUT' port connects to your LED strip or other DC load.

4.4. Detection Range

The sensor has a 120° detection angle and a range of 5-8 meters. Consider the placement carefully for optimal performance.

Diagram illustrating the 120-degree detection range from ceiling and wall mounts, covering 5-8 meters

Figure 7: Sensor Detection Range

5. Operating Modes

The PIR Motion Sensor Switch offers two main operating modes:

  • Mode A: Human Body with Light Control
    In this mode, the lights will turn on when motion is detected and the ambient light is dark. If no motion is detected, the lights will turn off after the set delay time. This mode is ideal for energy saving in areas that are only used when dark.
  • Mode B: Only Light Control
    In this mode, the lights will turn on when it gets dark, regardless of motion. They will remain on as long as it is dark. This mode is suitable for continuous lighting in dark environments.

5.1. Adjusting Delay Time

The delay time, which is the duration the light stays on after motion is last detected (in Mode A), can be adjusted from 18 seconds to 360 seconds. Use a small screwdriver to turn the adjustment screw on the back of the sensor:

  • Turn '+' to increase the delay time.
  • Turn '-' to shorten the delay time.
Detailed view of the sensor's back, showing input and output ports, and delay adjustment screw

Figure 8: Delay Time Adjustment

5.2. Operation Demonstration

Watch this video to see the PIR sensor switch in action, demonstrating its motion and light sensing capabilities.

Video 1: PIR Sensor Switch Functionality Demonstration

6. Troubleshooting

If the switch does not work properly after connection, please check the following common issues:

  1. Incorrect Power Wiring: Verify that the power supply and LED strip are connected to the correct 'IN' and 'OUT' ports, and that the positive and negative terminals are correctly aligned. Refer to the wiring diagram in Section 4.3.
  2. Voltage Mismatch: Ensure that the voltage of your LED strip and power supply matches the operating voltage range of the sensor (DC 5V-24V).
  3. Sensor Too Close to LED Light: If the switch is installed too close to the LED light, the light sensor might continuously detect light from the LED itself, causing the light to stay on always (especially in Mode A). Try repositioning the sensor further away from the light source.

7. Maintenance

To ensure optimal performance and longevity of your PIR Motion Sensor Switch:

  • Keep the sensor lens clean and free from dust or obstructions.
  • Avoid exposing the sensor to direct sunlight or extreme temperatures.
  • Do not attempt to disassemble or modify the device, as this will void the warranty.

8. Warranty and Support

This IKSLED PIR Motion Sensor Switch comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the IKSLED customer service.

For additional documentation, you may refer to the official user manual PDF: User manual (PDF)

9. User Tips

No specific user tips were available from customer reviews at this time. However, general advice for PIR sensors includes:

  • Optimal Placement: Position the sensor where it has an unobstructed view of the area you want to monitor. Avoid placing it near heat sources or air vents, as these can cause false triggers.
  • Testing: After installation, test both operating modes and adjust the delay time to suit your needs.
  • Power Supply: Always ensure your power supply provides stable DC voltage within the specified range (5V-24V) and has sufficient current capacity for your LED strip.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.