TUMMASTER GY-06

Contents

TUMMASTER GY-06 ARGB RAM Heatsink

Universal Memory Heat Sink for Desktop Computers

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TUMMASTER GY-06 ARGB RAM Heatsink. This product is designed to enhance the cooling performance of your desktop computer's memory modules while adding customizable Addressable RGB (ARGB) lighting. It is universally compatible with DDR2, DDR3, DDR4, and DDR5 RAM types.

TUMMASTER GY-06 ARGB RAM Heatsink (White)

Figure 1: TUMMASTER GY-06 ARGB RAM Heatsink (White)

2. Safety Information

  • Always disconnect power from your computer before installing or removing any components.
  • Handle memory modules and heatsinks with care to avoid damage to sensitive electronic components.
  • Ensure proper grounding to prevent electrostatic discharge (ESD).
  • Keep out of reach of children.
  • Do not attempt to modify the product.

3. Package Contents

Please check the package for the following items:

  • Aluminum plate (x2)
  • Top fixing cover (x1)
  • LED light bar holder (x1)
  • Thermal paste / Thermal pad (x2)
  • Hexagon Wrench (x1)
  • Hexagon socket head cap screw (x2)
  • EVA Poron pad (x1)
  • Short Memory-Dedicated height-increasing pieces (x2) - for short memory bars
Contents of the RAM heatsink package

Figure 2: Package contents including heatsink components, thermal pads, and tools.

4. Specifications

Feature Specification
Brand NameTUMMASTER
Model NumberGY-06
TypeRAM Armor
MaterialAluminum
Weight108g
RGB SupportA-RGB
Power Interface5V-3pin ARGB
Product LightingARGB
Appearance ColorBlack / White
Rated VoltageDC 5V
Rated Current0.21A
Interface Type5V3PIN male and female connectors
Dimensions (L x H)139mm x 54mm
Product dimensions and electrical specifications

Figure 3: Detailed dimensions and electrical specifications of the heatsink.

5. Setup and Installation

The TUMMASTER GY-06 RAM Heatsink is designed for flexible installation. Please refer to the diagram below and follow the steps carefully.

Exploded view and assembly instructions for the RAM heatsink

Figure 4: Exploded view and assembly methods for the RAM heatsink.

Assembly Method 1: For High RAM with Chips on Both Sides

  1. Take your memory stick (purchased separately).
  2. Apply the two thermal pads (thermal paste) to the two aluminum plates. Ensure the thermal pads make full contact with the memory chips on both sides of the RAM module.
  3. Place the memory stick between the two aluminum plates.
  4. Align the top fixing cover and LED light bar holder.
  5. Secure the assembly using the two hexagon socket head cap screws with the provided hexagon wrench.

Assembly Method 2: For RAM with Chips on Single Side

  1. Take your memory stick (purchased separately).
  2. Apply one thermal pad to the aluminum plate that will contact the side with memory chips.
  3. For the side without chips, apply the EVA Poron pad (from the accessories package) to the other aluminum plate. This ensures consistent thickness and proper contact.
  4. Place the memory stick between the two aluminum plates, with the thermal pad on the chip side and the EVA pad on the non-chip side.
  5. Align the top fixing cover and LED light bar holder.
  6. Secure the assembly using the two hexagon socket head cap screws with the provided hexagon wrench.

Assembly Method 3: For Short Memory Bars

  1. For short memory bars, first attach the two dedicated height-increasing pieces to both ends of the short memory bar using double-sided tape (if provided, or use your own).
  2. Once the height-increasing pieces are attached, proceed with either Assembly Method 1 or 2, depending on whether your short memory bar has chips on one or both sides.

ARGB Connection

After assembling the heatsink onto your RAM module, connect the 5V-3pin ARGB cable from the heatsink to an available 5V-3pin ARGB header on your motherboard. This will allow you to control the lighting effects via your motherboard's RGB software.

Illustration of the RAM heatsink installed on a memory module within a motherboard

Figure 5: Easy installation of the heatsink on a RAM module in a motherboard slot.

6. Operating Instructions

Once the heatsink is installed and connected to your motherboard's 5V-3pin ARGB header, the lighting can be controlled through your motherboard's dedicated RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard's manual for specific instructions on using its RGB control software.

Features of the ARGB RAM Heatsink: RGB lighting, easy handling, and thermal pads.

Figure 6: Product features highlighting ARGB lighting and thermal efficiency.

7. Maintenance

  • Cleaning: Periodically clean the heatsink and LED light bar with a soft, dry cloth to remove dust. Do not use liquid cleaners directly on the heatsink or electrical components.
  • Thermal Pads: The thermal pads are designed for long-term use. If you need to re-install the heatsink on a different RAM module, it is recommended to replace the thermal pads for optimal heat transfer.

8. Troubleshooting

  • ARGB Lights Not Working:
    • Ensure the 5V-3pin ARGB cable is securely connected to both the heatsink and the motherboard's ARGB header.
    • Verify that your motherboard's ARGB header is 5V-3pin. Connecting to a 12V-4pin RGB header will damage the LEDs.
    • Check your motherboard's RGB software to ensure the ARGB lighting is enabled and configured correctly.
  • Poor Heat Dissipation:
    • Ensure the thermal pads are making firm and complete contact with the RAM chips.
    • If there is excessive space between the RAM and the heatsink, consider adding additional thermal padding or foam to ensure snug contact and efficient heat transfer.
    • Verify that the heatsink is securely fastened with the screws.

9. User Tips

  • Ensure Proper Contact: Some users have noted that if there's a gap between the RAM and the heatsink, folding the included foam or adding extra thermal padding can improve contact and cooling performance.
  • Easy Reusability: The screw-based design allows for easy installation and removal, making it convenient to transfer the heatsink to new RAM modules if needed.
  • ARGB Compatibility: This heatsink is known to synchronize well with various ARGB control software, offering beautiful and customizable lighting effects.

10. Frequently Asked Questions (FAQ)

Q: Is this heatsink compatible with all RAM types?
A: Yes, the TUMMASTER GY-06 is designed to be universally compatible with DDR2, DDR3, DDR4, and DDR5 memory modules.
Q: How do I control the ARGB lighting?
A: The ARGB lighting is controlled by connecting the heatsink's 5V-3pin cable to a compatible ARGB header on your motherboard and using your motherboard's RGB software.
Q: Does the package include thermal pads?
A: Yes, the package includes two thermal pads and an EVA Poron pad to ensure optimal heat transfer and proper fit.

11. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

You can also refer to the official item guides and documents available at: User Manual (PDF)

12. Disposal Information

This product should not be disposed of with household waste. Please recycle it at an appropriate collection point for electrical and electronic equipment. For more information on recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.