4DRC V53

Contents

4DRC V53 Quadcopter Instruction Manual

Model: V53 | Brand: 4DRC

Suitable for ages 14 and up

Safety Warnings and Guidelines

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

  • The packaging and instructions contain important information and should be retained.
  • You are responsible for ensuring that this aircraft does not cause harm to others or property.
  • When commissioning and installing the aircraft, strictly follow the operating instructions. Maintain a distance of 2-3 meters between the aircraft and the user or other persons during flight to prevent the aircraft from striking anyone's head, face, or body during flight or landing, potentially causing injury.
  • Our company and the seller are not responsible for any loss, damage or personal injury caused by improper use or operation.
  • Children should be supervised by an adult when operating the aircraft. Children under 14 years old are prohibited from operating this product.
  • Please follow the instructions in the manual or packaging for correct installation and use. Some parts should be assembled by adults.
  • This product contains small parts. Please keep them out of reach of children to prevent accidental ingestion or choking.
  • It is strictly forbidden to play on the road or in places with accumulated water to avoid accidents.
  • Please put away the packaging materials in time to avoid harm to children.
  • Do not disassemble or modify the aircraft. Disassembly or modification may cause the aircraft to malfunction.
  • The charging cable must be plugged into the designated power supply 5V 2A that is the same as the product label.
  • Using other charging cables will damage the battery and may cause accidents.
  • The charging cable is not a toy.
  • When charging the rechargeable battery, it must be done under adult supervision and must be kept away from flammable materials during charging. During charging, the guardian should not leave the monitoring range.
  • Do not short-circuit or squeeze the battery to avoid explosion.
  • Do not mix different types of lithium batteries.
  • The aircraft uses rechargeable lithium batteries, which need to be unplugged for charging.
  • Do not short-circuit, disassemble, or dispose of the battery in fire; do not place the battery in a hot or heated place (such as in fire or near electric heating devices).
  • The aircraft should be used as far away from other electrical equipment and magnetic objects as possible.
  • Please keep a safe distance from the high-speed propeller to avoid the risk of strangulation or cuts.
  • The motor is a heat-generating component; do not touch it to avoid burns.
  • LED laser radiation; do not use it directly.
  • Do not use the model close to your ears! Misuse may cause hearing damage.
  • The battery must be charged using the USB cable provided by our company. Failure to do so may result in severe battery damage, potentially leading to accidents.
  • To ensure the magnetic environment requirements of aviation radio stations, during periods of radio control orders issued by relevant national authorities, the use of model remote controls within the city should be discontinued as required.
  • If the aircraft battery is depleted, be sure to turn it off, unplug it, and allow it to sit for 30 minutes before recharging. Failure to do so may damage the battery.

1. Included Accessories List

Please check the package contents against the list below:

Diagram showing all included accessories: Aircraft, Remote Control, Type-C Charging Cable, Lithium Battery, Fan Blades, Screwdriver, Instruction Manual.
  • Aircraft x1
  • Remote Control x1
  • Type-C Charging Cable x2
  • Lithium Battery x1
  • Fan Blades x4
  • Screwdriver x1
  • Instruction Manual x1

2. Names of Aircraft Parts

Familiarize yourself with the different components of your V53 drone:

Diagram of the V53 drone with numbered parts: 1. Fan blade, 2. Casing, 3. Camera, 4. Optical flow camera, 5. Battery, 6. Aircraft power switch, 7. Motor.
  1. Fan blade
  2. Casing
  3. Camera
  4. Optical flow camera
  5. Battery
  6. Aircraft power switch
  7. Motor

3. Names of Remote Control Parts

Understand the functions of each button and joystick on your remote control:

Diagram of the V53 drone remote control with numbered parts: 1. Antenna, 2. Left stick, 3. Right stick, 4. Emergency stop/One-button calibration, 5. Power switch, 6. One-button takeoff and landing/Induction mode, 7. Headless mode/One-button return, 8. Power indicator, 9. Display, 10. microSD card slot, 11. Charging port, 12. Scroll, 13. Left/right fine adjustment, 14. Speed gear, 15. Front/back fine-tuning.
  1. Antenna
  2. Left stick (Throttle/Rudder)
  3. Right stick (Directional/Roll)
  4. Emergency stop (short press) / One-button calibration (long press)
  5. Power switch (long press)
  6. One-button takeoff and landing (short press) / Induction mode (long press)
  7. Headless mode (short press) / One-button return (long press)
  8. Power indicator
  9. Display
  10. microSD card slot
  11. Charging port
  12. Scroll (short press)
  13. Left/right fine adjustment
  14. Speed gear
  15. Front/back fine-tuning

4. Display Screen Interface Function Introduction

The remote control's display screen provides various functions and information:

Three images showing the remote control's display interface. The first shows a 'connecting' status, the second shows options for 'take photo' and 'video recording', and the third shows a file browsing interface with picture and video icons.
  • Return: Press to go back.
  • Camera switch: Toggle between camera modes.
  • Screen off: Long press to turn off the screen.
  • Scroll up/down: Use to navigate menus.
  • Confirm: On the image interface, press and hold for 3 seconds while waiting for WIFI to connect to enter the image interface.
  • Take a photo: Press to capture an image.
  • Video recording: Press to start/stop video recording.
  • File browsing and setting interface: In the file browsing interface, press OK to select pictures or videos.

5. MicroSD Card Installation

To store photos and videos, install a microSD card:

Diagram showing how to insert and remove a microSD card from the remote control. The card is inserted chip side up.
  • Inserting: Carefully insert the card until it is firmly seated.
  • Removing: Gently press the memory card until you hear a click. The memory card has been ejected, then carefully remove it.

⚠️ Note: Please insert the microSD card before turning on the computer. Otherwise, the card will not be read. You must install the microSD card (chip side up) to take photos and videos during the flight.

6. Lithium Battery Charging Instructions

6.1 Aircraft Lithium Battery Charging

Follow these steps to charge the aircraft battery:

  1. Remove the battery: Push the battery to the right as shown in the figure to remove it.
  2. Diagram showing how to push the aircraft battery to the right for removal.
  3. Connect for charging: Plug the USB charging cable into a computer USB port (or a 5V 2A power adapter), and then connect the other end of the USB charging cable to the battery socket.
  4. Diagram showing various charging methods for the drone battery using a Type-C cable connected to a laptop, desktop, mobile power bank, or USB adapter.
  5. Charging indicator: When charging, the red indicator light on the module battery will light up. When the battery is fully charged, the red indicator light will go out.

⚠️ Note: When the aircraft is not flying, please do not install the battery inside the aircraft to avoid battery damage! You must use the aircraft charging cable provided by our factory to charge the aircraft. Do not use other charging cables to charge the aircraft. Remember to avoid accidents.

6.2 Remote Control Battery Charging

To charge the remote control battery:

  1. Connect for charging: Plug the USB charging cable into a computer USB port (or a 5V 2A power adapter), and then plug the other end of the USB charging cable into the charging port on the remote controller.
  2. Diagram showing how to connect the remote control to a USB charging cable.
  3. Charging indicator: During charging, the red indicator light on the remote controller's charging port will illuminate. When the battery is fully charged, the red indicator light will turn off, indicating charging is complete.

⚠️ Note: Before charging, be sure to turn off the remote controller's power.

7. Installation of Aircraft Components

7.1 Fan Blade Installation

Ensure fan blades are installed correctly for proper flight:

Diagram showing the correct installation of fan blades labeled A and B on the drone. Arrows indicate the direction of rotation.
  • Remove the fan blades.
  • The blades are printed with letters A and B. Please install them correctly according to the diagram, otherwise the aircraft will not take off.

8. Unfolding Steps (from storage state)

If your remote control is in a folded state, follow these steps:

Sequence of images showing how to unfold the remote control: install joysticks, then unfold the antenna.
  • Install the joystick.
  • Unfold the antenna.

9. Pre-flight Preparation Instructions

9.1 Environmental Requirements

Choose an open outdoor environment with no wind or snow and little wind to fly. Stay away from people, trees, power lines, tall buildings, airports, signal towers, etc. Do not fly in small, crowded indoor environments.

9.2 Aircraft Power On and Binding

  1. Turn on the aircraft and place it on a level surface. The aircraft will automatically enter the binding state and the lights on the fuselage will flash.
  2. Diagram showing the drone placed on a flat surface with its power button and flashing lights.
  3. Press and hold the power button on the remote controller. The power indicator on the remote controller will flash.
  4. Push the throttle stick up to the top and then push it all the way down. The frequency is successfully linked and the flight is ready. The indicator light changes from flashing to solid on.

⚠️ Note: Align the aircraft with its nose facing forward and make sure it is placed on level ground. The aircraft/remote controller must be fully charged, otherwise it will not take off!

9.3 Level Calibration Operation

To ensure stable flight, perform a level calibration:

Diagram showing the remote control with the horizontal calibration button highlighted.
  • Press and hold the horizontal calibration button on the remote controller. The LED on the aircraft will flash quickly.
  • The calibration is complete when the LED on the aircraft stays on and the remote controller makes a beep.

⚠️ Note: The aircraft must be placed on a level surface to complete the calibration.

10. Flight Operations

10.1 Start/Stop Flight

  • Start: Push the left joystick on the remote controller upwards. The aircraft will then take off normally. After takeoff, all indicators on the aircraft will remain on.
  • Diagram showing the left joystick pushed up to start the drone.
  • Stop: During flight, short press the stop button to stop the aircraft.
  • Diagram showing the stop button on the remote control.

⚠️ Note: This function is only suitable for use when the aircraft is out of control. It is recommended to use the one-button takeoff/one-button landing button under normal circumstances.

10.2 One-button Takeoff and Landing

  • After the unlock is complete, press the remote controller's "One-button takeoff/landing" function button. The aircraft will automatically rise to a height of about 1 meter and maintain this altitude for steady flight.
  • Diagram showing the one-button takeoff/landing button on the remote control.
  • Press this function button again and the aircraft will automatically and slowly land.

10.3 Remote Control Methods

  • Ascend/Descend: When the left joystick (throttle) is pushed up, the main blade speed increases and the aircraft rises. When the left joystick (throttle) is pushed down, the main blade speed slows down and the aircraft descends.
  • Diagram showing the left joystick controlling drone ascent and descent.
  • Turn Left/Right: When the left joystick (rudder) is pushed to the left, the aircraft's nose turns left. When it is pushed to the right, the aircraft's nose turns right.
  • Diagram showing the left joystick controlling drone left and right turns.
  • Forward/Backward: When the right joystick (rudder) is pushed up, the aircraft moves forward. When the right joystick (rudder) is pushed down, the aircraft moves backward.
  • Diagram showing the right joystick controlling drone forward and backward movement.
  • Fly Left/Right: When the right joystick (rudder) is pushed to the right, the aircraft will fly to the right. When the right joystick (rudder) is pushed to the left, the aircraft will fly to the left.
  • Diagram showing the right joystick controlling drone left and right side flight.

⚠️ Warning: When the aircraft is below 1 meter above the ground, it will be affected by the vortex of its own blades and become unstable. This is called "ground effect reaction". The lower the altitude of the drone, the greater the impact of ground effect reaction.

10.4 360° Roll

The aircraft can perform 360-degree rolls. For best results, ensure the aircraft is approximately 1.5 meters above the ground and perform rolls while ascending.

  • Forward 360° Roll: Short press the 360° Roll button, then push the right joystick upwards. The aircraft will roll forward.
  • Diagram showing how to perform a forward 360-degree roll using the remote control.
  • Backward 360° Roll: Short press the 360° Roll button, then push the right joystick down. The aircraft will flip backward.
  • Diagram showing how to perform a backward 360-degree roll using the remote control.
  • Left 360° Roll: Short press the 360° Roll button, then push the right joystick to the left. The aircraft will roll left.
  • Right 360° Roll: Short press the 360° Roll button, then push the right joystick to the right. The aircraft will roll right.

10.5 Speed Switching

After takeoff, the aircraft defaults to low speed mode (3 gears). Use the dial to switch speeds:

Diagram showing the speed dial on the remote control.
  • Increase Speed: Push the dial to the right. The remote controller will emit a "di" sound for low speed, "di di" for medium speed, and "di di di" for high speed.
  • Decrease Speed: Push the dial to the left to decrease the speed gear in sequence.

10.6 Fine-tuning Function

Use the fine-tuning controls to adjust the drone's stability:

Diagram showing the fine-tuning buttons on the remote control for forward/backward and left/right adjustments.
  • Forward/Backward Fine-tuning: If the aircraft deviates backward, pull the dial to the right to adjust. If it deviates forward, pull the dial to the left to fine-tune.
  • Left/Right Flight Fine Adjustment: If the aircraft deviates to the right, pull the dial to the left to adjust. If it deviates to the left, pull the dial to the right to fine-tune.

10.7 Sensing Mode

Enter sensing mode for interactive control:

Diagram showing the remote control with the sensing mode button highlighted.
  • During flight, press and hold the "Sensing Mode" button on the remote controller to enter flight sensing mode.
  • You can now control the aircraft by hand gestures. Keep your hand approximately 10 cm away from the aircraft.
  • If the aircraft flies too high, it will not be able to sense your hand and will automatically descend to a certain altitude after approximately 5 to 15 seconds.

10.8 Headless Mode

Headless mode simplifies flight control by eliminating the need to identify the drone's front direction:

Diagram showing the remote control with the headless mode button highlighted.
  • The front of the aircraft during power-on and binding defaults to the front of the headless mode.
  • To adjust the direction, re-power on the aircraft and briefly press the "Headless Mode" button on the remote controller.
  • To exit headless mode, briefly press the button again.

⚠️ Special Note: Always align the aircraft for straight-line flight, allowing the gyroscope to automatically detect the line, to achieve headless mode.

10.9 One-Touch Return-to-Home (RTH)

Use the RTH function to recall the aircraft if it has flown too far:

Diagram showing the One-Touch Return-to-Home button on the remote control.
  • When powering on and binding, the remote controller must be pointing directly at the aircraft's tail (and with headless mode enabled).
  • During flight, press and hold the RTH button. The remote controller will emit a beep, and the aircraft will enter RTH mode, automatically returning to the approximate direction of the remote controller.
  • You can then land by operating the control stick.

⚠️ Note: The RTH function is disabled if any joystick is pressed.

10.10 Stopping the Flight

To stop the flight quickly, grab the aircraft and turn it over:

Diagram showing how to stop the drone by grabbing it and flipping it upside down.
  • To stop the flight, grab the aircraft and turn it over.

10.11 Toss Mode

For a quick takeoff, use Toss Mode:

Diagram showing how to initiate Toss Mode takeoff by holding the drone and tossing it upwards.
  • After turning on the aircraft, place it on a level surface. If the remote controller does not bind within three seconds, hold the aircraft in your hand and extend it forward in a balanced position.
  • Wait for the light on the aircraft to flash slowly, then toss it upward or drop it downward. The aircraft will automatically take off.
  • You can now control the aircraft by referring to the general flight controls.

⚠️ Note: If the aircraft flies too high, it will not be sensed and will automatically descend to a certain altitude after approximately 5 to 15 seconds.

10.12 Optical Flow Fixed-Point

The optical flow system assists with stable hovering:

Diagram showing the drone hovering using optical flow positioning, with a hand underneath it.
  • When the aircraft is flying on a good surface, optical flow will assist the aircraft in hovering in one place, depending on the ground conditions and altitude.
  • Drift of about 1 meter is normal.

⚠️ Note: When the ground or surrounding environment is complex, do not adjust the camera drastically to avoid affecting the optical flow positioning.

11. Specifications

FeatureSpecification
ModelV53
Item NO.4D-V53
CategoryCamera Drone
Drone Weightabout 40g
Product Size10 x 10 x 5 cm
Max Takeoff Weight<1kg
Operating Temperature0°C to 40°C
Aircraft Operating Frequency2.4 GHz
Hovering/Flying Noise76.3/77.6 (dB)
Flight SystemOptical flow positioning / Intelligent obstacle avoidance
Obstacle Avoidance TypesLaser avoidance
Max Wind Speed Resistance< 10 KM/H
Motor TypeBrush Motor
Integrated Propeller GuardInclude
GPSNo
Display ControlYes
ConnectivityWiFi, APP Controller, Remote Control
Remote Control Operating Voltage3.7 V
Remote Control Operating Frequency2.4GHz
Remote Control BatteryBuilt-in rechargeable lithium battery (AAA battery*3 for normal remote, self-provided)
Aircraft Battery TypeLi-ion Modular Battery
Aircraft Battery Nominal Voltage3.7V
Aircraft Battery Capacity3.7V (specific mAh not provided, but flight time is 13-18mins)
Charging Temperature5°C to 40°C
Charging TimeAbout 90 minutes (aircraft), about 180 minutes (general)
Flight TimeAbout 13-18 minutes
Remote Distance150m (Free interference and no occlusion)
Wifi Image Transmission DistanceAbout 50-80m (Free interference and no occlusion)
Camera IntegrationCamera Included
Camera Parameters Pixel4K/6K/8K HD Camera (Front 8K HD lens with 90-degree adjustment)
Video Maximum Resolution4K (4096*2160)
Camera Features4K HD Video Recording, Fixed Camera Mount, Other
Sensor SizeNone
Aerial PhotographyYes
Removable/Replaceable BatteryYes
Equipped with Aerosol Spraying System/Spread Tank VolumeNo
High-concerned chemicalNone
Recommended age14 + years
OriginMainland China

12. Troubleshooting

Refer to this table for common issues and their solutions:

ProblemReasonWorkaround
The aircraft indicator light flashes but no response is received.The aircraft battery is low.Charge the battery.
The aircraft's blades are spinning but it won't fly.
  • Low battery
  • Blade deformation
  • AB propellers installed incorrectly
  • Charge the battery.
  • Replace the propeller blades.
  • The fan blades are printed with letters A and B. If an A fan blade is broken, replace it with A. If a B-fan blade is broken, replace it with B.
The aircraft vibrated violently.Blade deformation.Replace the propeller blades.
I have adjusted the trim to the bottom but still cannot make it fly stable.
  • Blade deformation
  • Motor failure
  • Replace the propeller blades.
  • Replace the motor.
After the collision, the aircraft was uncontrollable when it was restarted.The three-axis acceleration sensor is lost due to impact control flying balance.After the aircraft is left still for 5-10 seconds, or by calibrating the water level, just calibrate it flat, and you're good to go. Please refer to the instruction manual, 10.3 Horizontal Calibration Operation for the steps.

13. User Tips

  • For optimal image transmission, ensure your mobile phone is securely mounted to the remote control (if using the screen-less remote) and that there is minimal interference in your environment.
  • When performing gesture controls, make sure your hand is clearly visible to the drone's camera and held steady for accurate detection.
  • Always check propeller blades for any damage before each flight. Even minor damage can affect flight stability and safety.

14. Statement of Compliance

Disclaimer

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Product Demonstration Video

Demonstration of V53 Drone features including takeoff, landing, optical flow positioning, one-click shooting, speed modes, special roll, obstacle avoidance, and gesture controls.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.